Hello visitor from USA USA - 14 visiting from USA 13 USA Russia 1 Russia
This Month's Highlights:
- Southeastrigging (Usa): Lifting, Rigging, Material Handling, Wire Rope, Chains, Nylon Slings, Cordage http://www.southeastrig.com

37 Degree Flare Fittings, Iso 8434 3 Fittings

Posted at: Offers to Sell and Export | Posted on: Tue 07 Oct, 2008 8:16 am |
37 degree flare fittings iso 8434 3
Products Photos CatalogDegree Flare Fittings Photos Catalog

J. J. 37º Flare Fitting is manufactured as per SAE J514 / ISO 8434 - 2 for ease of interchangeability.

It consists of three parts Body, Sleeve, and Nut and is available for different pressure rating ranging from 70Bar to 690Bar

Type : 37º Flare Fitting

Standard : SAE J514 / ISO 8434 - 2

Size : 3mm to 38mm

1/8”OD to 2”OD

Pressure : Ranging from 70Bar to 690Bar depending on type and size

Material : Steel, Stainless Steel, Brass (From extruded bar or forging)

Surface Treatment : Steel – Zinc Coated (A3C) or Phospatised, Trivalent

Stainless Steel – Electro polished, Nut Silver Plated to avoid


Brass – Natural


J. J. 37º Flare fittings are composed of three parts :-

1. Body

2. Sleeve

3. Nut

Tightening of the nut clamps the tube flare between the body nose (seat) producing a leak tight connection. This clamping on the 37º taper provides a measure of elasticity to the joint helping it to resist loosening under vibration. The clamping force results in a small radical load that tends to deform the fitting nose radially. The resistance of the nose to elastic deformation provides a constant preload (similar to a lock washer) keeping it tight. The clamping force provided by the nut resists the opposing force of the fluid under pressure. The joint remains leak tight as long as the clamping force is higher than the opposing pressure load. Properly assembled Flare Fittings with appropriate tube will seal consistently under pressure until tube bursts.

Company Contact:

No member photo
Contact Name: Mahesh
Company Name: J. J. Hydraulics Pvt. Ltd.
Email: Email
Tel: +91 022 28768693
Fax: +91 022 28771657
Street Address: 46 1st Floor, Jagat
Satguru Industrial Estate, Kotkar
Off Aarey Road, Goregaon (east),
Mumbai 400063, India
Website: http://www.jjhydraulics.com
Member name: Jjhydraulics
Country: India-IN India
Member Since: 01 October 2008
Total Leads: 9 Jjhydraulics Import Export Business Leads
Business focus: Din 2353 Fittings Manufacturer, Single Ferrule Fittings, Twin Ferrule Fittings, Double Ferrule Fittings, 37 Degree Flare Fittings, Sae Flanges
Verify: Safe Import Export Tips

Similar LeadsSimilar Suppliers And Manufacturers Import Export Trade Leads

Start Import Export Stories Import Export Startup Stories

Share Your Story & Get Listed at StartImportExport.com

TradersCity Free Import Export Trade Leads B2B Board  Offers to Sell and Export
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely