-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 126 visiting from 115 USA 
3 Singapore 
2 UK 
1 Germany 
1 India 
1 Romania 
1 Argentina 
1 Australia 
1 Brazil
Hello visitor from
USA - 126 visiting from 115 USA 3 Singapore 2 UK 1 Germany 1 India 1 Romania 1 Argentina 1 Australia 1 Brazil
4e1 To Ethernet Converter
Posted at: Offers to Sell and Export | Posted on: Monday 5 August 2013 2:43 am | Poster last visit: Friday 22 January 2016 |
Product Description:
4E1 to Ethernet converter, E1 port support 75ohm or 120ohm, Ethernet port support 10/100Mbps，standalone
or rack mount, Power DC48V or AC220V.
Product function:4E1 to 10/100BT ethernet converter used back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between 1 to 4 E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point to point, realize the connection of E1 channel and Ethernet. It different from normal bridge, supporting 1 to 4 E1 channels customized configuration, auto detecting the number of E1 channels and use the available E1, allow some limiting transfer delay between different E1 channels. Single line speed is 1968Kbits/s, 4 channels can up to 7872Kbits/s. it can connect with Ethernet switch or hub when in 10/100Mbps full/half duplex mode, make use of mass E1 resource in telecommunication networks to expend the transfer distance and application field of Ethernet, is a suitable solution for broadband switch in of Ethernet. It can used in fields such as connecting LANs, connecting end offices, VOD, remote monitor, E1 interface of switches, etc.
Realize transparent transfer Ethernet data in 1 to 4 E1 channels
10M/100M Ethernet, full/half duplex self adapt, support VLAN.
Ethernet support AUTO-MDIX( cross over and straight through self adapt)
setting CRC alarm limitation to auto isolate lines with low transfer quality, single direction. When one direction error rate over limitation, disconnect only one direction, the other is not affected. Unbalance in two directions.
Allow 4 E1 channels up to 10ms transfer delay. when the delay over the limitation, can stop transfer automatically.
Having 2 loop back functions: E1 local loop, E1 external loop.
Support Dynamic Ethernet MAC address(4096), having local address filter function.
E1 interface compatible with ITU-T G.703, G.704, and G.823. signaling slot not supported.
E1 interface having internal clock resume circuit and HDB3 codec circuit.
support E1 channel hot plug, and auto detect available E1 channels not pause the transmission.
supporting 1 to 4 E1 channels customized configuration, auto detect the number of E1 channels and select the available E1 at reset.
E1 Support 75ohm/unbalance impedance or 120ohm/balance for option
support reset remote system from local system.
having Ethernet monitor auto reset function
Parameter and specifications
E1 interface
Standard: E1 interface compatible with G.703 standard.
Rate: 2.048Mbit/s?50ppm
Coding: HDB3
Impedance: 75ohm(unbalance) or 120ohm(balance)
Connector: BNC(75ohm) or RJ45(120ohm)
Jitter Performance: According to G.742 and G.823
10/100Base-T
Rate: 10M/100M, full/half duplex self adapt.
Protocol: support IEEE 802.3, IEEE 802.1 P, 802.1Q (VLAN)
MAC address table: 4096 MAC addresses.
Ethernet buffer: 64Mbits SDRAM
Physical interface: RJ45, support AUTO-MDIX(cross over and straight through self adapt)
Dimension
19inch Type:433 mm(L)×138mm(W)× 44 mm(H)
Operating environment
Voltage: DC-48V, input range: DC-36V~DC-72V
Power Consumption: <=5 Watts
Working temperature: 0C~50C
Storage temperature: -40C~+70C
Humidity: 95%
No causticity and solvent, dust free, and no strong magnetic interference.
Company Contact:
Contact Name: Dora
Company Name: Shanghai Baudcom Communication Device Co, .ltd
Email:
Tel: +86 21 37709251
Fax: +86 21 37709302
Street Address: Room1301, No45, Lane
1505, Mei Jia Bang Road, Song Jiang
District, Shanghai, Shanghai City,
China 201620
China
Member name: ShanghaiBaudcom
Country:
China
Member Since: 09 July 2013
Total Leads: 140 ShanghaiBaudcom Import Export Business Leads
Business focus: Telecommunications, Communication Devices, E1 Converter, Fiber Midea Converter
Chat:
Verify: Safe Import Export Tips
or rack mount, Power DC48V or AC220V.
Product function:4E1 to 10/100BT ethernet converter used back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between 1 to 4 E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point to point, realize the connection of E1 channel and Ethernet. It different from normal bridge, supporting 1 to 4 E1 channels customized configuration, auto detecting the number of E1 channels and use the available E1, allow some limiting transfer delay between different E1 channels. Single line speed is 1968Kbits/s, 4 channels can up to 7872Kbits/s. it can connect with Ethernet switch or hub when in 10/100Mbps full/half duplex mode, make use of mass E1 resource in telecommunication networks to expend the transfer distance and application field of Ethernet, is a suitable solution for broadband switch in of Ethernet. It can used in fields such as connecting LANs, connecting end offices, VOD, remote monitor, E1 interface of switches, etc.
Realize transparent transfer Ethernet data in 1 to 4 E1 channels
10M/100M Ethernet, full/half duplex self adapt, support VLAN.
Ethernet support AUTO-MDIX( cross over and straight through self adapt)
setting CRC alarm limitation to auto isolate lines with low transfer quality, single direction. When one direction error rate over limitation, disconnect only one direction, the other is not affected. Unbalance in two directions.
Allow 4 E1 channels up to 10ms transfer delay. when the delay over the limitation, can stop transfer automatically.
Having 2 loop back functions: E1 local loop, E1 external loop.
Support Dynamic Ethernet MAC address(4096), having local address filter function.
E1 interface compatible with ITU-T G.703, G.704, and G.823. signaling slot not supported.
E1 interface having internal clock resume circuit and HDB3 codec circuit.
support E1 channel hot plug, and auto detect available E1 channels not pause the transmission.
supporting 1 to 4 E1 channels customized configuration, auto detect the number of E1 channels and select the available E1 at reset.
E1 Support 75ohm/unbalance impedance or 120ohm/balance for option
support reset remote system from local system.
having Ethernet monitor auto reset function
Parameter and specifications
E1 interface
Standard: E1 interface compatible with G.703 standard.
Rate: 2.048Mbit/s?50ppm
Coding: HDB3
Impedance: 75ohm(unbalance) or 120ohm(balance)
Connector: BNC(75ohm) or RJ45(120ohm)
Jitter Performance: According to G.742 and G.823
10/100Base-T
Rate: 10M/100M, full/half duplex self adapt.
Protocol: support IEEE 802.3, IEEE 802.1 P, 802.1Q (VLAN)
MAC address table: 4096 MAC addresses.
Ethernet buffer: 64Mbits SDRAM
Physical interface: RJ45, support AUTO-MDIX(cross over and straight through self adapt)
Dimension
19inch Type:433 mm(L)×138mm(W)× 44 mm(H)
Operating environment
Voltage: DC-48V, input range: DC-36V~DC-72V
Power Consumption: <=5 Watts
Working temperature: 0C~50C
Storage temperature: -40C~+70C
Humidity: 95%
No causticity and solvent, dust free, and no strong magnetic interference.
Company Contact:
Contact Name: Dora
Company Name: Shanghai Baudcom Communication Device Co, .ltd
Email:
Tel: +86 21 37709251
Fax: +86 21 37709302
Street Address: Room1301, No45, Lane
1505, Mei Jia Bang Road, Song Jiang
District, Shanghai, Shanghai City,
China 201620
China
Member name: ShanghaiBaudcom
Country:
ChinaMember Since: 09 July 2013
Total Leads: 140 ShanghaiBaudcom Import Export Business Leads
Business focus: Telecommunications, Communication Devices, E1 Converter, Fiber Midea Converter
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Poe2410 Fast Ethernet Poe Injector 24v1a - By LGLGUO - On Monday 20 February 2023 1:16 am: poe2410 fast ethernet poe injector 24v1a
product features
this product is a power supply designed for network communication equipment small output ripple high efficiency of 90-264vac wi....
Is1000-1005 Series Industrial Ethernet Switches - By houshi - On Monday 3 April 2023 8:12 am: ethernet switches
support 5 100m electrical ports
support ieee802 3 802 3u 802 3x store and forward mode
support 10 100m full half duplex mdi mdi....
Do / Din / Ain 8 Ports Ethernet I / O Module For Data Acquisition And Control - By bliiot - On Wednesday 1 November 2023 2:08 am: do din ain 8 ports ethernet i o module for data acquisition and control
it is design for working in the harsh industrial application environment widely used in a variety of industrial automation security monitoring sys....
Cellular Ethernet Lora Wireless Transmission Gateway For Smart Agriculture - By bliiot - On Friday 27 October 2023 3:47 am: ethernet or 4g network thus realizing remote data acquisition and monitoring lora gateway supports a variety of wireless lora nodes including temp....
Is6000-6028 Series Managed Industrial Ethernet Switch Gigabit Switch - By houshi - On Wednesday 19 April 2023 7:29 am: ethernet switch gigabit switches support 28 gigabit electrical ports including 8 fixed gigabit electrical ports and 4 fixed combo ports sfp slots su....
Lag-s400 Infrared Converter Slag Detection System - By WuhanCenterRise - On Friday 9 September 2022 1:28 am: converter slag detection system
overview
the infrared converter slag detection system uses a far-infrared thermal imager to monitor the situation of....
Greenhouse Ventilation Exhaust Fans Control Inverter 3 Phase 380v Frequency Converter Transducer For - By fxairsolution - On Thursday 24 November 2022 1:53 am: converter is specially designed for greenhouse exhaust fans and has a temperature control function the frequency converter is suitable for exhaust fa....
Mel-40 4e1 To Ethernet Protocol Converter - By tomxiong - On Friday 30 March 2007 2:06 am: 4e1 to 10base-t ethernet and vice versa this protocol converter could support 1-4e1 to ethernet which extend the bandwidth to 7 68mbps it is widel.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Beijing Fibridge Co Ltd: Siya Liu Of Beijing Fibridge Company, A Manufacturer Of Intelligent Video And Telecommunication From China
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely