Water filter export enterprise
activated carbon for Water treatment
carbon differs greatly from particles activated carbon in the application and each type has its respective advantages in the water disposal.
Content powder activated carbon particles activated carbon
types of eliminated compounds taste& odor taste& odor
organic micro pollutants organic micro pollutants
suspending substanceoxidizer residue
typical application seasonal application or applied when there is some problem in water continuous demand when using activated carbon
the residue density of the targeted impurity after disposal low low/extremely low
application and disposal equipment special absorbertransformed sand filter
regeneration none(disposable) heat regeneration
device needed feeding device filtering containerdelivery/operative device for particles activated carbon
Particles Activated Carbon- advanced technology
Filtering with particles activated carbon is the currently updated technology for disposing water, used alone or after ozonization as the terminal step (polishing). Because the organism is ozonized, the biological activation of the particles activated carbon is obviously improved, and the life expectancy of the filter is prolonged.
Particles activated carbon is mainly used to remove various soluble organisms with different molecular weight: compounds relevant to taste& odor, total organic matter (DOC，TOC，KMnO4 value, absorbed UV), biologically degradated organisms (AOC, BDOC), pesticide, detergent. In addition, it can remove the suspended substance and oxidizer residue (such as ozone).
Types of Filters
Gravity filter is the most ordinary type, also there is pressure filter. Exclusive filters and other available types can also be applied in the activated carbon absorption. Those exclusive filters are specially designed for particles activated carbon, and their typical empty bed contact time (EBCT) is 10-20 minutes.
Remodeling of available filters
• Rapid sand filtering: to change into particles activated carbon or multilayer particles activated carbon/sand and obtain the relative short EBCT (< 10 minutes)
• Slow sand filtering: to put particles activated carbon at the top or between two layers of sand and obtain the relative long EBCT (> 30 minutes)
Types of Particles Activated Carbon
During the disposal process of drinking water, various impurities should be removed, therefore, a multitude of particles activated carbon have been developed by our company. Some of them are for special applications, and the other are multifunctional. The major types and applications of the particles activated carbon for purifying drinking water are as follows:
Dq type iodine value bed density
（kg/m3)1 valid size
（mm） uniformity coefficient raw material
Dq1240 1075 440 0.6 1.7 coal
Dq 1020 1050 440 1 1.4 coal
Dq830 975 460 0.9 1.7 coal
Dq 40S 950 460 0.6 1.7 coal
Dq 50S 1050 345 N/A 2 N/A 2 peat
Dq PK 1-3 800 255 1.2 1.6 peat
Dq PK 3-5 800 230 2.9 1.3 peat
Dq GCN 1240 1050 450 0.6 1.9 coconut shell
Dq GCN 830 1050 450 0.9 1.7 coconut shell
Particles activated carbon applied in the drinking water can reach the strictest request of purity, comply with the American Food and Chemistry Regulation (the 4th version, 1996), and meanwhile meet the demand of precipitation of metals, PAH and cyanide set by EN12915(European standard, 1999).
Powder Activated Carbon---Low Investment Cost
Powder activated carbon is widely used in the disposal of drinking water to eliminate the taste/stink, organic micro-pollutants, such as pesticide.
Advantages of our powder activated carbon:
• Flexibility: Dose and type can be changed according to practical demand (for example, under certain emergency)
• Low investment：Separation of powder activated carbon can be undertaken with the solid separation.
• High efficiency for certain compounds.
• Saving cost
Ultra Filtering (UF)
In this recently developed separation technology, powder activated carbon is added in the upstream of the UF system--- ultrafiltration membrance will separate the powder activated carbon from water. According to the backwash break, powder activated carbon will remain active for 1 hour to the maximum extent.
Rapid Sand Filtering (RSFs)
When powder activated carbon is added before rapid sand filtering, it will be separated over the filtering process (maybe with the help of flocculating agent). The pure contact time can be considered from two different perspectives:
• Hydraulics: the staying time between feeding and filtering of powder activated carbon (normally < 1 hour)
• Filtering：the gross staying time of powder activated carbon in the filter, that is to say, the average period between two continuous backwashes (normally > 1day).
Powder Activated Carbon: Package, Operation and Feeding
Packaged and provided in small paper bag, large packing bag or large scale tank.
• Particles of powder activated carbon that will be decomposed in water: a 3mm-diameter pill which will decompose into powder after contacting with water
• Wet powder activated carbon
Under normal condition, the moisture quality is 50%, and it can be used in the dust-free operation.
Contact Name: Li Haoqian
Company Name: Hebei Deqian Environmental Protection Technology Co., Ltd.
Street Address: 14#, Xingde Road,
Yantuan Town, Julu County, Xingtai
City, Hebei Province, 055250, China
Xingtai, Hebei 055250 China
Member name: deqiancarbon
Member Since: 04 March 2019
Total Leads: 16 deqiancarbon Import Export Business Leads
Business focus: Activated Carbon, Wood Activated Carbon
Verify: Safe Import Export Tips
Product Category: Activated carbon