Hello visitor from USA USA - 46 visiting from China 21 China USA 14 USA France 11 France
Free Join Now

Battery Analyzer

Posted at: Offers to Sell and Export | Posted on: Wed 25 Feb, 2009 10:18 am |
battery analyzer
Products Photos CatalogBattery Analyzer Photos Catalog

Weight:0.90 KG

This Battery Analyzer is designed to test the condition of the automotive battery

using conductance method. Unlike the conventional method of draining the battery by applying resistance load to it and obtain the result from the meter gauge; this analyzer utilizes a series of pulsed voltage across the battery cells and observes the AC current that flows in response to it.

The benefits of this test method are:

Conductance correlates directly to the battery capacity

Passive testing method is safe.

Never discharges or drain the battery.

Able to test condition of discharged battery.

Consistent and repeatable results.

Provides unique indication of battery conditions.

Besides, this analyzer also provides check the Alternator's charging and Starter's cranking conditions.

It is maintenance free and no internal batteries required. It powers up when connected to the battery posts during testing.

Key Features

Simple and easy to use

Test batteries on and off the vehicle

Accurate results in milliseconds

Battery Life Analysis

Analysis Result : Good or Replace

Large easy to read LCD display.

Test results based on JIS, EN, DIN, SAE and IEC Standards.

Check Alternator charging conditions

Check Engine Starter conditions.


Test Result: Good or Replace

Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.

Internal resistance value (mΩ )

Life in percentage (%)


Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.

Operating Parameters:

System voltage: 12 Volts

Input voltage range: 9V~15V

Power requirements: No internal batteries required. Power on when hooked up during testing.

Testing range: 100 ~ 1700 CCA, 100 ~ 1000 DIN, 100 ~ 1000 IEC, 100 ~ 1700 EN

Test Time: Less than 5 seconds.

Company Contact:

Hongfenginternationalgr photo
Contact Name: Jennifer
Company Name: Shenzhen Huawenyi Technology Co., Ltd
Email: Email
Tel: 0086-0755-83677988-1692
Fax: 0086-755-82981320
Street Address: Floor 25,
Lanse Haiyunju Building, No.9 Shixia
North 1st St., Futian District,
Shenzhen 518048 P.R. China
Website: http://cnreliable.en.alibaba.com
Member name: Hongfenginternationalgr
Country: China-CN China
Member Since: 02 December 2008
Total Leads: 83 Hongfenginternationalgr Import Export Business Leads
Business focus: Auto Diagnostic, Key Programmer, Gm Tech2, Toyota Tester, Ford Vcm Ids, Scanners, Car Lift
Verify: Safe Import Export Tips

Similar LeadsSimilar Suppliers And Manufacturers Import Export Trade Leads

Start Import Export Stories Import Export Startup Stories

Share Your Story & Get Listed at StartImportExport.com

TradersCity Free Import Export Trade Leads B2B Board  Offers to Sell and Export
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely