The ECU must be removed from the car and is programmed by special spring contacts without soldering on
the circuit board. This method is used for example if a car has no connection from the OBD connector to the ECU or for very new ECU versions. The best tool for this is the BDM 100
Which way of programming is used, depends on manufacturer, model, year and the ECU type in the car. Generally we use the 「easiest」 way of programming. So if a car can be programmed by the OBD port, we will do it this way.
After the security entries for the OBD2 programming get more and more difficult, a new possibility has come up for chip-tuning of ECUs with Motorola MPC555 – 565.
This generation of Motorola processors contain 448KB - 1MB Flash memory. That memory cannot be read and programmed with an eprom programmer. Therefore it is possible over the so called BDM interface, which must be implemented on every ECU board. For that purpose there are mostly 10 solder pads on the PCB.
Alternative there are ECUs with 12 or 14 solder pads, which can be supplied with operating voltage over these pads.
The BDM100 connects these solder pads of the BDM port with the WinOLS PC over the USB bus. The BDM100 gets its operating voltage from the USB bus. The ECU needs its own supply voltage of +12 volts.
The BDM100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor essential).
Please see our contact info below
Contact Name: Ms. Mandy
Company Name: Shenzhen Master Automobile Tech. Co., Ltd
Mobile: 0086 13424350193
Street Address: 1313 Room, Dongfeng
Building, No.2010 Shennan Mid.road,
Futian Dis, Shenzhen, China.
Member name: autodiagnosis4
Member Since: 22 May 2009
Total Leads: 81 autodiagnosis4 Import Export Business Leads
Business focus: Auto Diagnosis, Car Maintenance
Verify: Safe Import Export Tips