A typical processing flow of PET washing(recycline) line
1.Inclined steel conveyor belt
the material to the down stream granulator (debale machine).
2.Shredder (debale machine)
debale the baled bottles
for separating and manually sorting the material to remove foreign substances and relieve the down stream equipment.
4.Inclined conveyor belt
transport the material to the down stream label remover. The conveyor belt would be equipped with metal detector bridge mounted over a metal free area on the conveyor belt.
For detection of NE metal and protect the granulator and washing components.
for separating the labels and other loose and foreign materials.
7.Inclined conveyor belt
transport the material to the down stream granulator.
for dry (or wet) size reduction of the material to the necessary particle size of 10-15 mm.
9.Material transport screw
transport the material from the granulator
Clean the materials in hot washer sometimes with soda
Convey the materials to next procession
12.Intensive cleaner (friction washer)
to surface clean the PET flakes
13.Separation tank (poaching tank)
For separation of the flakes with a specific density of < 1 g/cbm from >1 g/cbm
The material fraction with a specific density of >1g/cbm (PET) is consistently transported with a discharge screw to the down stream mechanical dryer
The material fraction with a specific density of <1 g/cbm is transported via a discharge hole to a non-usable material container.
14.Mechanical dryer (dewatering machine)
Mechanical surface drying of the material flakes.
15.Thermal dryer (dying and blowing system)
For final drying of the material to the necessary residual level for down stream material processing
16.Fines separator (cyclone silo)
for separation of dust and fine material to achieve a better quality final product.
mositure of final products less than 2%
capacity from 200-2000kg/h
Contact Name: Jack Sun
Company Name: Jiangsu Lianguan Science And Technology Development Co., Ltd
Tel: 86 512 58578000
Fax: 86 51258570215
Street Address: No.2 Baixiong Road
Sanxing Industry Zong Jinfeng Town,
Zhangjiagang City, Jiangsu P.R.China
Member name: PlasticMachines
Member Since: 28 February 2009
Total Leads: 56 PlasticMachines Import Export Business Leads
Business focus: Plastic Pipe, Sheet, Profile, Extruding Lines, Recycling Lines, Material Mixers
Verify: Safe Import Export Tips