|
|
|
|
|
|
| |
C-mark T Series Full-bridged Digital Amplifier
Posted at: TradersCity --> Offers to Sell and Export
| Brazil | Iran
Posted on: Fri 25 Apr, 2008 6:08 am
Technical introduction
1. Zero Error Modulation Technology
Zero error modulation is to avoid scope error in the process of converting analog audio signal to digital signal using modulation technique.
2.Distortion Self-Adaptive Elimination Technology
Distortion adaptive elimination uses PLL technology, which can adapt and eliminate noise and distortion from various sectors of power amplifier such as driving, amplifying, filter… and so on.
3.Over-Current Protection Technology
Over-current protection happens when there is a short circuit in the output. Under low impedance, above condition threatens the safety of the power amplifier, its protection status starts and output signals are closed. When the hazard is removed, it can be detected automatically and resumes normal work. Strengthened capacitive load protection ensures no damage for the power amplifier when connecting any load.
4.Current Limit Technology
This technology can protect the device from over heat caused by long time operation with rated power output. If everything is normal, the function shall not come to effect.
5.Temperature Limit Technology
The amplifier usually stops working when the temperature reaches 85℃; our digital amplifier has Temperature Limit Technology, which enables the amp to auto reduce output power accordingly, and adjust balance of heating and cooling when the temperature reaches a certain level, and the amp shall not stop working.
6.Fan Rotation Speed Control Technology
This technology ensures high efficiency, low heat and low electromagnetic interference by controlling the rotation speed of fan via PWM technology which is synchronous to switch power.
7.Adaptive to Global Voltage
With APFC, bipolar transistor and MOSFET, the amplifier is auto adaptive to Global Voltage (90-265V). No need for any manual adjustments. They can be widely used in areas with different power supply or unstable voltage. Amplifier output efficiency is up to 95%. High working Frequency of Switch Power; Small size; High efficiency.
8.Condenser load Protection Technology
This technology ensures that Condenser load cause no damage to the amplifier.
9.HF Short-Cut Protection Technology
As to other digital amplifier, when audio signal’s frequency is higher than 10KHz, signals going through LC low pass filter will have an output short cut to earth. Then inductor will suffer all the voltage difference. So the amplifier will be overheated. Our company adopts special HF protection circuit to prevent it from this problem.
10.Anomaly Protection Technology
When amplifier has an anomaly, output with Direct Current will cause harm to speaker. Our digital amplifier with Auto DC Inspection Circuit ensures the safety of speaker.
11.Other Features
Our amplifier adopts:
★Axial fan (Not centrifugal fan).
★Independent exclusive Temperature-controlled fan board having no interference to audio circuit.
★Audio input and power output are totally separated. (Powersoft with adjoined input and output module )
★ Built-In amplifier module. (Powersoft with external amplifier module).
★ CobraNet Interface at option to realize all digitalized data transmission.
Specification
Input & output specifications:
Power rate: OUTPOWER
impedance model T1450 T2650 T3500
8Ω 450w 650w 1000w
4Ω 900w 1300w 2000w
2Ω 1000w 1500w 2300w
S/N: 105dB (A-weighted)
GAIN: 30dB-33dB Selectable
(T series digital amplifiers are provided three optional gains for connection of different load usage. Low impedance connects low gain to prevent exceptional protection.)
Frequency response: 20Hz-20KHz (+1/-2dB)
Damping factor: 300@1KHz
Phase differences: (Typical value)
Frequency 20Hz 1KHz 20KHz
Phase(°) +11° -6° -137°
CMRR (common mode rejection rate): (Typical value)
Frequency 100Hz 1KHz 20KHz
CMRR(dB) 71dB 66dB 66dB
Input impedance: 15KΩ balanced
Cross-talk attenuation: (Typical value)
Frequency 20Hz 1KHz 20KHz
CTC(dB) 85dB 80dB 65dB
THD(total harmonic distortion): (Typical value)
Frequency 100Hz 1KHz 10KHz
THK+N@10%Rated Power 0.08% 0.08% 0.05%
IMD (Intermodulation distortion): (Typical value)
Power 1 Watt
DIM 100(dB) 0.05%
SMPTE60/7K(dB) 0.05%
Power supply specifications:
Voltage AC85V-265V 50/60Hz
Electric current @220 VAC
1/8 rated power
impedance model T1450 T2650 T3500
8Ω 1A 1.4A 2A
4Ω 1.7A 2.3A 3.4A
2Ω 1.9A 2.6A 3.8A
1/3 rated power
impedance model T1450 T2650 T3500
8Ω 2.2A 3A 4.2A
4Ω 3.9A 5.4A 8A
2Ω 4.2A 6A 9A
Other Specifications:
1.Cooling mode: compulsive cooling (4 Temperature control fan speed machine)
2.Input connector: balanced XLR
3.Output connector: SPEAKON connector
4.Control: 2 channels volume control (front panel), optional gain (rear panel)
5.LED indicator: level indicator, malfunction indicator, overheat indicator
6.Dimensions: 483*400*443mm W*D*H
7.Weight: 9.8 kg
Contact person: Fancy Zhang
Email: fancy.zhang@c-mark.com.cn
MSN: yezi227@hotmail.com
Cell: 0086 13425157873
|
|
Company Contact: Contact Name: Fancy Zhang
Company Name: Shenzhen Bao Ye Heng Industrial Development Co., Ltd.
Email:
Tel: 0086 13425157873
Fax: 0086 13425157873
Street Address: Room 301, 3rd Floor,
Jilian Building#4, Xinzhou North
Road , Futian District, Shenzhen,
Guang Dong Province, China P.C.: 518031 Website: http://www.c-markaudio.com/english
Member name: Cmark
Country: China
Member Since: 25 April 2008
Total Leads: 17
Business focus: Pro Audio Products, Loudspeaker, Driver,Power Amplifier, Digital Amplifier, Processors, Wireless Microphone, Conference System, Audionet
|
|
|
|
|
|
|
|
|
Similar Leads ( mark bridged digital amplifier )
| Import Export Lead |
Posted By |
Posted |
Preview |
 |
C-mark Tx2400 Half-bridged Digital Amplifier |
Cmark |
Fri 25 Apr, 2008 6:27 am |
digital amplifier are provided three gain selection for connection of different load usage low impedance connects low gain to prevent exceptional pro.... |
 |
C-mark Ga500 Digital Amplifier |
Cmark |
Fri 25 Apr, 2008 5:21 am |
bridged signal input output adopts amp #966 6 35 stereo interface for balance signal transmission
5 suitable for many applications like commercia.... |
 |
C-mark Da Series Mini Digital Amplifier |
Cmark |
Mon 15 Dec, 2008 8:43 am |
digital amplifier from 2-ch to 6-ch 100w 8 amp #937 200w 8 amp #937 and 300w 8 amp #937 can be achieved per 2-ch various models can meet all re.... |
 |
Net6000d Network Digital Amplifier |
Cmark |
Tue 27 May, 2008 7:19 am |
digital amplifier low heat emitting light weight and high power output remote control and adjustment can be realized by connecting one cat cable t.... |
 |
High Quality Solid State Stereo Amplifier, Handmade Hi-fi Speaker Amplifier |
Isinotech |
Wed 17 Jun, 2009 7:18 am |
amplifier handmade hi-fi speaker amplifier
model isi-m2604
output power 50w each
frequency response 20hz 50khz
s n 89db a weigh.... |
 |
Handmade Hi-fi Vacuum Tube Amplifier, Audio Amplifier |
Isinotech |
Wed 17 Jun, 2009 7:15 am |
amplifier audio amplifier
model isi-m30a
output power 25w each
frequency response 20hz 50khz
s n 89 5db a weighted
tube 6n.... |
| |
Pa Amplifier |
patech |
Tue 28 Nov, 2006 11:56 pm |
amplifier
mixer amplifier
mixer pre-amplifier
subwoofer amplifier
power amplifier
graphic equalizer
speaker and so on
you can al.... |
 |
Dmx Signal Amplifier |
anjlighting |
Thu 23 Jul, 2009 12:42 am |
amplifier
specifications
input voltage 120 240vac
input connector 3-xlr male
output connector 3-xlr femal
ip class ip65
dimensi.... |
 |
Amplifier / Ds600 / |
aclon |
Mon 13 Apr, 2009 6:37 am |
amplifier ds600
amplifier ds600
the ds series 2 channels lightweight power audio amplifiers its can give you clean sound acl sound quality and reliability tha....oit |
 |
Led Rgb Signal Amplifier |
yueyuanlights |
Thu 13 Aug, 2009 2:05 pm |
amplifier
working temperature -20-60 amp #8451
supply voltage dc5v 12v 18v 24v
output 3 channels
connection mode common anode
externa.... |
|
|
|
Free Magazine Subscription
|
|
|
|
|