Craven 1250 / 3500 Center Lathe

CRAVEN 1250/3500 Center Lathe

Height of machine centres – 616 mm
Maximum admit between centres – 3505 mm
Angle of centres supplied 60 st
Will swing in diameter over saddle – 813 mm
Overall length of machine – 8687 mm
Length of bed – 6858 mm
Width over bed shears – 1016 mm
Depth of bed – 457 mm
Number of saddles – One
Headstock front spindle bearing – 10 `` dia. x 15,3/8`` long
Headstock rear spindle bearing – 8,3/4`` dia. x 10`` long
Tailstock barrel diameter – 6`` diameter
Headstock faceplate diameter – 1372 mm
Faceplate gripping capacity
Maximum – 1118 mm
Minimum – 89 mm
Number of headstock spindle speeds – Sixteen
Range of headstock spindle speeds – 1,54 to 75 r.p.m.
Number of feed changes – twelve
Range of feeds per rev. of spindle
Sliding – 0,112 mm to 2,54 mm
Surfacing – 0,056 mm to 1,27 mm
Capacity of four-point stay
Maximum – 635 mm
Minimum – 152 mm
Capacity of journal support stays
Maximum – 635 mm
Minimum – 152 mm
Caqpacity of journal support stays
Maximum – 210 mm
Minimum – 102 mm
Maximum throw of crankshaft in
Rotary Stay – 178 mm
Main drive motor – 25 H.P. at 960 r.p.m.

Location - Poland

_________________
Contact Name: Renata Dutka
Company Name: Zphu Blachmix
Email: Renata@blachmix.pl
Tel: 0048 18 3301567
Fax: 0048 18 3301565
Street Address: Poland, 34-600
Limanowa, Stara Wies 461
Website: http://www.blachmix.pl