CLK Diffusion Cyclone Collector
Details of cyclone collector
CLK diffusion cyclone collector is suitable
for supplementing dry non-fibrous granular . The main feature is that the barrel body is inverted cone shape, thus reducing the possibility of gas from the center of the barrel body to the outlet, Cone-shaped reflective screens are installed to prevent the two air streams from re-coiling the separated and being carried by the updraft, thus improving the removal efficiency.
CLK diffusion cyclone collector is used in the inries such as metallurgy, foundry, building materials, chemical food, cement, etc. to supplement the dry non-fibrous particulate and flue gas, and can be used as recycling material equipment.
XD Type Multi-Cyclone Collector
Details of cyclone type collector
XD type multi-cyclone collector is a kind of high-efficiency collector. The removal efficiency can reach above 95%. The body resistance is lower than 900Pa. The existing boiler induced draft fan can ensure the normal operation of the boiler. XD type multi-cyclone collector has good load adaptability. At 70% load, the removal efficiency is above 94%.
The cyclone in the XD type multi-cyclone collector is made of cast iron or ceramic and its thickness is more than 6mm, so it has good wear resistance. It is the ideal equipment for inrial boiler flue gas removal and other treatment.
XZZ Cyclone Collector
Details of cyclone collector
XZZ type cyclone collector spirally moves from top to bottom when the -laden airflow enters into the collector through the contraction-shaped inlet. The material is run against the wall under the action of centrifugal force, and it rotates down the wall to enter special In the sealed and collecting device of the structure, the purified gas is discharged from the bottom up and spirally through the core tube.
XZZ multi cyclone dust collector design Features:
The through-type bypass chamber is designed to effectively eliminate the ash phenomenon and it is not easy to block.
The structure of the vertebral body close to the straight tube type was designed, eliminating the formation of the lower gray ring, avoiding local wear and rebound phenomenon of coarse particle, and improving the service life and removal efficiency.
A device designed to effectively prevent the secondary from flying in the lower part of the is designed.
XZZ type cyclone collector is mainly used for burning hot water or evaporating boiler at the base, and XZZ cyclone collector is also suitable for other inrial removal needs.
GLT/A Cyclone Collector
Details of catching machine
The GLT/A cyclone collector is composed of a cyclone cylinder, a hopper and a volute (or wind cap). It is divided into several types according to the number of cylinders: single cylinder, double cylinder, three cylinders, four cylinders, and six cylinders. There are five combinations of barrels, each of which has two types of the air outlet, one type of horizontal air outlet and the second type of upper air outlet. For the one type of double cylinder combination, there are two types of combination of the positive air inlet and outlet air and side air inlet and outlet air. One type of single-barrel and three-barrel have only one type of side-in and wind-out. The combination of four-barrel and six-barrel only has the form of mid-inlet and out-air. For any combination of type two, any one of the above types of air intake position can be used. GLT/A cyclone collector is characterized by low resistance, high removal efficiency, large processing air volume, stable performance, small floor space, simple structure, practical and cheap, etc. It is applicable to all kinds of mechanical processing, metallurgy building materials, and purification of mining and mining.
HX-1410 Cyclone Collector
Details of cyclone separator
HX-1410 Cyclone Collector introduction:
The HX-1410 cyclone collector can be used in combination with a single cylinder and several single cylinders. The single cylinder processing air volume is 1.5-1.8 thousand meters 3/hour.
There is a reflective screen at the bottom of the vertebral body to prevent secondary air flow from re-elevating the separated .
With the material level material sealing device, high removal efficiency, up to 95%.
The inner wall is coated with 20 mm thick wear-resistant, high-temperature lining material, base wear resistance is 20 to 30 times that of ordinary carbon steel, its temperature is up to 450 °C, can directly deal with high-temperature exhaust gas.
TXP Ceramic Cyclone Collector
Cyclone collector reviews
TXP ceramic cyclone collector is a new type of cyclone collector designed on the basis of many kinds of cyclone collectors and adopts Stayman's highest optimization coefficient structure type. The inner shell and the components are built using ceramic barrels to ensure their anti-wear properties. Not only the service life is guaranteed, but also the steel consumption is reduced, which reduces the cost of the equipment and the maintenance cost. Solved the problem of cyclone wear.
TXP Ceramic Cyclone Collector removal mechanism:
The TXP ceramic cyclone collector utilizes the effect of the peak of the velocity field distribution in the cyclone drum on the rise of smoke and sets up the riser and the secondary separation chamber and the intermediate exhaust pipe. The flue gas swirls from the inlet into the barrel at the design speed, and the is separated by centrifugal action. The separated from the top and bottom settles along the barrel to the ash tank; the flue gas rises along the diameter of the cylinder around 0.6 at the peak speed of the swirling flow. The part of the flue gas containing a higher concentration of fine swirls along the rising drum wall into the secondary separation chamber at high speed and then returns to the cone through the bypass duct. The secondary separated falls to the bottom of the cone and sinks into the same separated . Ash tank. The secondary separated flue gas is discharged from the middle exhaust pipe through the outlet. Since the swirling speed of the rising cylinder is much higher than that of the main cylinder, the fine can be effectively separated. Greatly improve the overall removal efficiency.
TXP Ceramic Cyclone Collector Adaptation scope and description:
TXP ceramic cyclone collector is suitable for removal with relatively dry .
To adapt to the use of high-temperature gas conditions below 400 °C.
Can be used as a production process for the efficient recovery of various materials.
To adapt to 0.5-60t / h layer boiler or as a front-burner flue gas purification use.
XGD/W Efficient Ceramic Multi-Pipe Collector
Details of cyclone collector filter
XGD/W Efficient Ceramic Multi-Pipe Collector Introduction:
XGD/W type high-efficiency ceramic multi-tube collector is a new product jointly developed by our company and Tangshan Steel Design Institute. Passed the technical appraisal of the State Environmental Protection Administration and the Hebei Provincial Science and Technology Commission, and cooperated with the Design Institute of Hebei Metallurgical Design Institute, Shougang, Anshan Iron and Steel, and Jinan Iron & Steel to open up a new path for ceramic multi-tube collectors. This product is widely used in the treatment of inrial furnace cell waste pollution. The treated air pollutants all reach GB9807-1996 "Emission Standard for Air Pollutants in Inrial Furnaces".
XGD/W Efficient Ceramic Multi-Pipe Collector Structural features:
XGD/W type high-efficiency ceramic multi-tube collector mainly consists of equipment housing, net gas room, removal room, air inlet, air outlet, ash hopper, and ash discharge port. There is a combination of upper plate, low plate, and cyclone. to make. According to the different parameters such as air volume, air pressure, and particle weight required to process, cyclones of different specifications are built.
-laden gas enters the chamber through the air inlet of the collector, and then enters each cyclone. Under the action of the guide, the exhaust gas entering the cyclone is separated by the centrifugal force and falls directly into the ash hopper. The purified gas enters the purging chamber upwards in the outlet core tube and is discharged from the outlet.
XGD/W Efficient Ceramic Multi-Pipe Collector Features:
The main components-cyclone, guider, and gas outlet pipe are made of ceramics and other materials. They are not deformed or broken under the conditions of high temperature (up to 700°C) and low-temperature difference.
Ceramic cyclone and guide surface smooth, non-stick ash, non-blocking, corrosion resistance, wear resistance, high hardness, the service life of up to 6 to 8 years.
Investment is small, its investment is 1/2 of the electric collector, management and maintenance cost less, and the service life is more than three times that of other collectors.
High efficiency, low resistance, a removal efficiency up to 95%, resistance 800pa, secondary removal efficiency up to 98%, resistance is 1200pa.
It shows its advantages in the treatment of the special flue gas with high corrosiveness and high temperature and heat energy recovery. The operation is simple, the management is convenient, the operation cost is low, no cooling measures are taken, water is saved, and the cost of heat recovery is greatly reduced.
XGD/W Efficient Ceramic Multi-Pipe Collector Application scope:
Applicable to various types of coal-fired heating furnace, coal-fired boilers of various types of civil power plant, inrial boiler flue gas treatment.
Applicable to the treatment and recovery of mines, sintering machines, pellets, rotary kiln, a shaft furnace, refractory, steel-making, steel rolling and other working conditions in various steel inries.
Suitable for cement rotary kiln, dryer, and various smelting treatment and recovery.
Applicable to the treatment of high-temperature gas in blast furnace and converter coke dry quenching, and improving the heat recovery rate. Take water and eliminate sewage treatment to prevent explosion danger during gas recovery.
YDT Circular Multi-Tube Ceramic Collector
Details of cyclone collection systems
YDT type vertical multi-tube ceramic collector is made of 250mm standard ceramic cyclone circular arrangement, compared with the square, it has a simple structure, beautiful appearance, not easy to accumulate ash, small size, small footprint, Small resistance, low steel consumption, low cost, etc.
In terms of structure, the wall of the airflow distribution chamber is lined with a wear-resistant layer to ensure the service life, and the inlet and outlet are circular, which facilitates the installation of smoke and air ducts. The tongue-plate self-unloading ash discharge device not only has good sealing performance but also can adjust the discharge volume and facilitate management. The humidifier can be installed according to the user's opinion, which can greatly reduce the fly ash pollution when ashing and promote environmental sanitation.
YDT Circular Multi-Tube Ceramic Collector removal mechanism:
-laden flue gas enters the air distribution chamber and flows into the cyclone. After the spiral guide piece, a swirling flow is formed in the cylinder body. The particles are separated from the gas due to the effect of centrifugal force. The separated particles are discharged into the hopper from the cone along the cylinder wall. Storing ash to a certain degree of storage is discharged by the unloader. The purified flue gas is discharged from the cyclone core tube through the exhaust chamber outlet.
Contact Name: Yueqiang Wei
Company Name: Hebeioutai Environmental Protection Equipment Co., Ltd
Street Address: Mojiabali Village
Waliwang Town Botou City Cangzhou
City Hebei Province Cangzhou, Hebei
Member name: weiyueqiang
Member Since: 21 June 2019
Total Leads: 16 weiyueqiang Import Export Business Leads
Business focus: Dust Collector, Bags, Dust Conveying System, Dust Collector Accessories
Verify: Safe Import Export Tips
Product Category: Dust collectors