The "Canneed EBT-200 Buckle Tester for loose ends (with Missile Test)" determines the exact pressure
at which the end buckles. Any end of varying diameter may be tested: change parts are available that can be exchanged within seconds.
The loose ends to be placed in the holder. By the ring-like laying-on device the end is being fixed in its circumference. Close the door, Depress the "start" button. The "EBT-200 Buckle Tester" clamps the end firmly and tightly. Fast pressure increase up to 5 bar (programmable to just bellow the expected buckle value), from there the "speed of pressure increase" may be set within the device. The test is terminated as soon as the end buckles. The maximum pressure value is shown in the display.
Thus very constant results may be achieved which are independent from a later seam process. In comparison to seamed ends the results differ by 0.3 to 0.8 upwards.
With Missile Test function. When the consumers open a canned carbonated beverage, if the metal sheet of the ring fly off, it could be very dangerous and may hurt on the eyes. The "Canneed EBT-200 Buckle Tester for loose ends" can simulate the situation of opening a canned carbonated beverage, the "RP" end will be tear off under a force of 0.6Mpa, the ring on the ends to be pull up rapidly by the hook, if the ring or the metal sheet which is inside the annular score was fly off, then the sample is disqualified.
* Suitable for any end of varying diameter
* With piston supercharger, able to doubled the Pneumatic supply
*Touch screen PLC control system, auto data collection.
*Rs-232 Communications Capability
*Multi safety apparatus
* Overload Protection
*Test Point for Calibration
*Pressurization speed and curve may be set
*display the max. and min. measuring value and average after several test
Technical data (changes reserved):
Measure range: 0-900 Kpa (0.9 Mpa)
Resolution: 1 Kpa
Accuracy: 0.5% F.S.
Rear Panel: RS232 serial output
Power supply: 115/230V, 50Hz
Pneumatic supply: 0.5 Mpa
Dimensions: 520 x 460 x 750 (W x D x H )
Weight: 50 kg
Contact Name: Roy Woo
Company Name: Canneed Instrument (hongkong) Limited
Tel: 86 758 2153978
Fax: 86 758 2782729
Street Address: Address : Room 1-3,
No.66, Heping Road Zhaoqing 526060,
Member name: Canneed
Member Since: 15 November 2008
Total Leads: 46 Canneed Import Export Business Leads
Business focus: Qc Equipments For Canmaking, Food, Beverage Industry, Seam Monitor, Pop, Tear Tester, Body Blank Gauge, Enamel Rater, Can Gauge, Bottle Gauge
Verify: Safe Import Export Tips