MG-26 FRP rebar pultrusion line
Fiberglass rebar pultrusion line is used to produce FRP rebar with different
specification. It can finish distributing yarn, dipping glue, pre-molding, winding, heating and hardening, traction, set-length cutting and pile up automatically.
This line mainly consists of yarn support, dipping glue slot, winding, dry oven, haul-off machine, cutting saw and tilt tipping device.
Yarn support: used to place the yarn spool, adopts the welding structure of steel plate, steel pipe and angle iron.
Dipping glue slot: welded by stainless steel material, there is press roller inside to make the roving dip in the resin sufficiently.
Winding device: adopts gear wheel to drive the roller turn around the products, and wind the thread. This device adopts frequency conversion speed-regulated mode, adjust the rotate speed stepless.
Dry oven: adopts cast aluminium heater, intelligent temperature controller to control the temperature. The heating box adopts mesh structure and it is easy to open it and clean the dropping resin, filled with insulation materials inside.
Working voltage 380V/50HZ Air pressure 0.4-0.6Mpa
General power 20Kw Center height 1000mm
Number of winding heads 2 Winding diameter Max. 26mm
Winding rotation speed 9-95rpm Traction force Max. 40Kn
Traction speed 0.1-1m/min Clamping width 500mm
Clamping length 1200mm Cutting speed 2850rpm
Cutting range (W*H) 600*65mm Length setting mode Limiting switch
Cutting journey 700mm Dimension 20000*1850* 1450mm
Contact Name: Beryl Wang
Company Name: Shandong Jinan GoldLead Machinery Co., Ltd
Street Address: No.7 North Jiqing
Road, Mingshui Economic Development
Zone Of Zhangqiu, Shandong, China
Member name: JinanGoldleadMachinery
Member Since: 20 May 2010
Total Leads: 49 JinanGoldleadMachinery Import Export Business Leads
Business focus: Frp Equipment, Frp Pultrusion Machine, Frp Sheet Machine, Frp Mould, Frp Rebar Machine, Frp Pullwinding Machine, Frp Doors, Windows Processing Machine
Verify: Safe Import Export Tips