The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with
Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix Tech-2 Specifications
12" x 6" x 2"
32 bit, 16 MHz
32 MB flash type II PCMCIA. Type III slot available for future expansion.
Integral RS232 communication port.
3.8" X 2.8" backlit monochrome with full graphics capability: 320 X 240 pixels. Displays up to 9 vehicle parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb )
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/Security features
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash's diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II
The following GM vehicles utilize the CAN interface:
’05 Buick Allure (3.6L)
’05 Buick LaCrosse (3.6L)
’05 Buick Rainier (5.3L)
’04-’05 Buick Rendezvous (3.6L)
’04-’05 Cadillac CTS (3.6L)
’04-’05 Cadillac SRX (3.6L / 4.6L)
’04-’05 Cadillac XLR (4.6L)
’05 Cadillac STS (3.6L / 4.6L)
’05 Chevrolet Cobalt (2.2L)
’05 Chevrolet Corvette (6.0L)
’05 Chevrolet Equinox (3.4L)
’05 Chevrolet TrailBlazer (5.3L)
’05 Chevrolet SSR (6.0L)
’04 Chevrolet Malibu (Body/Chassis only)
’05 Chevrolet Malibu (3.5L)
’05 GMC Envoy (5.3L)
’05 Pontiac G6 (3.5L)
’05 Pontiac GTO (6.0L)
’05 Pontiac Pursuit (2.2L)
’03-’05 Saturn ION (2.2L)
Contact Name: Melissa
Company Name: Uat Auto Testing Equipment
Tel: 86 0150 84994047
Fax: 86 0731 84430047
Street Address: 504 Room A9 Building
No.218 Jinxing Road, Changsha, China
Member name: uautotest
Member Since: 27 October 2009
Total Leads: 304 uautotest Import Export Business Leads
Business focus: Diagnostic Tools, Star Diagnosis, Bmw Gt1, Tacho Universal Dash Programmer, Odometer Correction Tool
Verify: Safe Import Export Tips