High pressure triplex plunger pump is generally very efficient and suitable for high heads at low flows.For
more information please visit at "pressurejet" website. Triplex plunger pumps are self priming as it can draw liquid from a level below the suction flange even if the suction pipe is not evacuated. Plunger pumps are not tolerant to solid particles.
Here, pistons are reciprocated using crankshaft, not cam type mechanism.
Pressure Jet industrial high pressure triplex plunger pumps are positive displacement triplex plunger pumps. In a reciprocating pump, a volume of liquid is drawn into the cylinder through the suction valve on the intake stroke and is discharged under positive pressure through the outlet valves on the discharge stroke. Flow rate of pump is directly proportional to its SPM (Strokes per minute). Pressure Jet triplex plunger pumps have three synchronized plungers that discharge liquids at high pressure with minimum pulsation. Our high pressure triplex plunger pumps include both industrial triplex piston and triplex plunger pump designs.
Here, plungers are reciprocated using crankshaft, not cam. The plunger pump design with mechanically actuated inlet valves and moving piston cups permit strong suction and pressures up to 100 kg/cm2. The plunger pump design with pre-set packing and concentric ceramic plungers provide high pressures up to 700 kg/cm2 (10, 000 psi) and multiple head and drive options. Our extensive range of industrial triplex high pressure plunger pumps provides just the most suitable pump as per specific requirement of flow rate & pressure for thousands of tasks including washing, cleaning, water jetting, hydro blasting, hydro testing, hydro jetting, wet sandblasting, splitting, sewer cleaning, transfer, reverse osmosis, descaling, deburring, misting, injecting and dosing. Our industrial triplex plunger pumps are operating in harsh seawater desalination systems, reclaim car washing/vehicle cleaning, hydrostatic accumulator charging and multi-station central cleaning systems. Maintenance and production managers specify Pressure Jet high pressure industrial pumps because they are extremely reliable, efficient, dependable, and easy to maintain and provide long life.
· Boiler/heat exchanger/evaporator tube cleaning / pipe cleaning
· Tank cleaning/vessel cleaning
· Water sandblasting
· Hydro testing of tanks, vessels, pipes, valves & fittings, hoses & systems
· Injection of fluids & fuel oils
· Boiler feeding
· Reverse osmosis
· High pressure cleaning
· Vehicle cleaning
· Fire fighting
· Sewer jetting & Drain jetting
· Tube cleaning & Pipe cleaning
few important applications
Waste water Re - Injection
· Compact, lightweight unit enables portability and easy installation.
· Simplicity of service allows a quick on-sight periodic maintenance.
· Dependability and longevity of service means minimal downtime.
In the process of bringing crude oil out of the ground, a large quantity of salt water or brackish water is also brought up. In a typical oil field situation, the crude oil is pumped to a holding tank. After approx. a half day, the crude oil separates from the salt/brackish water, the oil rises to the top of the tank and the waste water & sediment remain at the bottom of the tank. To avoid transfer of sediment with the salt water, the salt water outlet is tapped into the tank about one foot above its bottom. At this level, the hose connects the tank to the inlet of the pump, which then pumps the salt water back into the ground under high pressure.
Flow and pressure required for injection may differ from one site to another due to variables such as the volume of the salt water, depth of wells and ground density.
Boiler Feed Auxiliary Fuel
· Constant flow and pressure delivered.
· Maintenance free operation.
· Low horsepower, energy efficient operation.
· Eliminates need for two pumps as with previous centrifugal.
Normally the boilers are fired by natural gas, however, during extreme weather conditions, both summer heat or winter cold, an auxiliary fuel supply is needed.
When the need for auxiliary fuel exists, the situation is critical and the pump must run without fail. The Pressure Jet pump has proven itself ready for duty during a complete heating and cooling season without need for service.
· Eliminates expensive mechanical failures of old system.
· Improves production time and quantity.
· Provides more consistent exciting
· Reduces bottle breakage and beer spilling.
Exciting of beers is making beer foam. Just before beer bottles are capped, they are charged with a high pressure shot of water, which causes the beer to foam/excite. This is very important part of the procedure forces gases out of the bottle. This exciting process provides a more consistent quality product with enhanced flavour and longer shelf life. PressureJet has supplied high pressure pump for this application to M/s. KHS Machinery Pvt. Ltd., a leading manufacturer of brewery machinery.
High Pressure Feed Pump for Splitting Process
In Oleochem industries, oil is to be splitted and converted into crude fatty acid. This oil splitting process requires counter flow of oil and water at high temperature & pressure.
From one end, oil is fed into the splitting tower under pressure with the help of a high pressure triplex plunger pump through a heat exchanger, wherein its temperature is raised upto 230 to 250º C. From another end, water after passing through a heat exchanger and raising its temperature to 250º C is passed to the splitting tower under pressure by a high pressure pump. This process is called as hydrolysis process. Oil starts splitting into fatty acid and glycerol. The later gets mixed with water, whereas; density difference separates the former being light in weight.
Pressure Jet has supplied many High Pressure triplex reciprocating Plunger and piston Pump for different application in many countries like South Africa, Mexico, Brazil, Malaysia, Philippines, Thailand, Turkey, Indonesia, Pakistan, Bangladesh, Nigeria, Vietnam, Egypt, Iran, South Korea, Ukraine, Spain, Colombia, Argentina, Tanzania, Sudan, Poland, Kenya, Algeria, Canada, Morocco, Uganda, Peru, Ghana.
Contact Name: Sharad Parmar
Company Name: Pressurejet Systems Pvt. Ltd.
Street Address: 62/13, PhaseIi, Nr.
Patels Airtemp, Gidc, Vatva,
Ahmedabad 382 445, Gujarat, India
Member name: pressurejet
Member Since: 19 September 2009
Total Leads: 48 pressurejet Import Export Business Leads
Business focus: High Pressure Triplex Plunger Pump, Reciprocating Piston Pump, Hydrostatic Hydrotest Pump, Car Power Pressure Washer Pump, High Pressure Cleaners
Verify: Safe Import Export Tips