Oilfield mud agitators at Aipu solids are high quality items. They are rather reliable and cost-effective.
Per clients' preference, they can be horizontal or vertical type. The gear box including worm and worm wheel type, also the helical bevel gear box
Shaft and impeller are custom built parts. According to mud tank size and dimension we'll design them vary from each other. Furthermore, the drive motor is from 7.5HP to 30HP per certain working condition
Furthermore, Aipu produce the agitators with or without control panel.
Please find more information below
Model APMA5.5 APMA7.5 APMA11 APMA15
Motor 5.5KW(7.5hp) 7.5KW(10hp) 11KW(15hp) 15KW(20hp)
Impeller Speed 60/72RPM 60/72RPM 60/72RPM 60/72RPM
Single Impeller 850mm 950mm 1050mm 1200mm
Dual Impeller N/A
Up:800mm Up:850mm Up:950mm
Down:800mm Down:850mm Down:950mm
Ratio 25:01:00 25:01:00 25:01:00 25:01:00
Dimension 870×600×480mm 906×600×480mm 1075×650×525mm 1170×720×565mm
Shaft Length Depends on tank depth
Power System 380V/50HZ, 460V/60HZ (Customer built)
Remark Explosion proof motor is available, shaft stabilizer is available
A mechanical agitator is driven by an explosion-proof motor coupled to a gearbox that drives the impeller & shaft. The impellers transform mechanical power into fluid circulation or agitation. The objective is to achieve a uniform suspension of all solids.
Solids control mud agitators are the mud mixers on Mud Tank. Including the horizontal and vertical type. That is meant by motor mounting direction. Nowadays, more and more users prefer the helical bevel geared agitator. Why? The helical bevel gear box will be more stable and reliable than the helical worm and wheel gearbox.
We hear the motors vary from each other as well. Such as30 HP motor of 380V/50Hz/3Ph and 4 poles. For mud process, usually we request agitator rotate at 60~70 rpm, thus we'll find proper gearbox with certain reduction ratio. (Of course, the rated speed was calculated well prior to model selection under torque demand, and so on)
For example, if we require shaft rotates 62 rpm with 1450 rpm motor, then the gearbox reduction ratio should be about 23:1. While if we request shaft rotates 13 rpm with 730 rpm motor, then the reduction box should hold reduction ratio at about 56:1.
Contact Name: Jessie
Company Name: Aipu Solids Control
Street Address: 4th Jingyuan Road,
Jinghe Industry Zone
Xi'an, Shaanxi 710200
Member name: aipusolidcontrol
Member Since: 11 July 2017
Total Leads: 172 aipusolidcontrol Import Export Business Leads
Business focus: Solids Control Equipment, Shale Shaker, Mud Cleaner, Centrifuge
Verify: Safe Import Export Tips
Product Category: Mixers or agitators