IMTC Micro Butt Welder has benefit of entire wire processing industry for butt welding of ferrous and non-ferrous wires in the range of 0.3 to 2.50 mm dia, to withstand subsequent drawing. These machines are designed as table models and constructed with particular regard for easy operation. The automatic welding process guarantees high tensile and uniform welds, depending upon the material to be welded and the size of wires, seven different models are available, four models for the welding of iron, steel and nickel, two models for welding of copper, brass, bronze and aluminum wires and one model for the welding of copper, hicarbon, aluminum and mild steel. Shearing device and illuminated magnifier are available as standard optional extras. These are automatic upset Butt Welding Machines. The ends of wires to be joined are prepared on the special shearing attachment provided. The welding current and the initial upset gap are set according to the size of wire, the up setting pressure being pre set at works, The wire ends are then rigidly clamped by special quick acting clamps and viewed through an illuminated magnifying glass provided to ensure correct alignment of the wire ends. By depressing a push button, the butt welding cycle is initiated and complete automatically by built-in controls. Weld completed the job is now declamped and annealed if necessary in the annealing device provided.
_________________
Contact Name: Mr. Partha Sen
Company Name: Industrial Machinery & Tools Corpn.
Email: Imtceng@eth.net; Imtcengg@vsnl.net
Tel: 91-22-23824366, 66356263, 66356364
Fax: 91-22-23806359
Mailing Address: 15, Avantikabai Gokhale
Street, P.o. No. 3684, Mumbai - 400 004.
India
USA 
Russia 
Germany 
Romania 
China 
Colombia
India
