Non-skid nosing stair tread
The vertically positioned bars are designated as the bearing
bars. These bars range in size from 3/4"x1/8" for light pedestrian traffic to 7"x1/2" for extreme vehicular loads. Typically, the spacing of the bearing bars is indicated in sixteenths of an inch, measured from the center of one bar to the center of the adjacent bar. This center-to-center or "on center" spacing ranges from 7/16" to 19/16"(1-3/16") on standard grating products. Standard gratings are also available with wider spacings providing even greater open area, but should not be specified without consulting the manufacturer. Heavy Duty grating products are commonly manufactured with bearing bar spacings ranging from 15/16" to 38/16"(2-3/8") on center.
The bars used to secure the position of the bearing bars are commonly designated as the cross bars. Cross bar profiles vary according to the method of assembly and material selected. As with bearing bars, cross bar spacing is measured as "on center" spacing. The customary cross bar spacing is 4" on center. On special order, 2" on center and other special spacings are also available.
Methods Of Assembly: WELDED GRATING, SWAGED PRESSURE LOCKED, DOVETAIL PRESSURE LOCKED, RIVETED GRATING
Material:steel, aluminum, Fiberglass, electroplate
Contact Name: Sales
Company Name: Hebei Lijie Wire Mesh Manufacturing Co., Ltd.
Tel: +86-318-7509002 7509000
Street Address: Houchenggan
Development Zone, Anping, China
Member name: HLWireMesh
Member Since: 20 May 2010
Total Leads: 1614 HLWireMesh Import Export Business Leads
Business focus: Soft Black Annealed Iron Wire, Black Tie Wire, Cut Lenghten Wire, Double Loop Wire Ties, Elec Glavanized Iron Wire, Hot Dip Galvanized Iron Wire
Verify: Safe Import Export Tips
Product Category: Stair nosing