a. Parts Description:
a.1 Indicator: Part(3) is status indicator. Blue light is a photo mode indicator;
Red light is video model indicator.
a.2 Button(2): Press the button to turn on, turn off, start, stop, video recording.
a.3 Socket: USB socket (5) is used to connect computer or charger. It is the interface for data transfer and charging, To connect USB
data cable, please remove the lighter shell at first.
a.4 Microphone and camera: Microphone (4) is used to get the sound signal ;Camera(1) is used to get the image signal.
a.5 Reset: If the video recorder stops responding, please use the suitable non-metallic tool to push the reset button(4).
a.6 Use Lighter: Draining the flint screw(6), you can replace the flint; fuel cotton (7) for filling lighters needed fuel, but only by adding
a little, not too much, so as to avoid damage to electronic components by fuel oil spill.
b. ON/OFF: Press the button(2) to turn on the device. Then the blue light is on, The device begin initializing, After initialzation complete, The blue light is off, the red light is on. The device enters into the
video recording mode, Press the button for 2 seconds, all lights will be turned off. The device will automatically save the current file and shutdown.
Note: Don’t press any button when the device is initialzing, The
device will not response it.
video:Note: Make sure there is adequate light in the surrounding and the camera is not blocked by other items. Keep the camera upright and stable. And the object should be more than 50cm from the camera.
In order to ensure good sound effect of recording, do not block the microphone hole.
d. PC camera: When the power is on, you can connect the device with computer USB interface, you can enter the PC Camera (webcam) mode. In this mode, your camera can be used as a PC camera, with your friends online video chat, take photos, and so on.
Note: According to the computer system configuration or difference, the computer may not detect a camera mode by once, if the computer can not enter the camera mode, but into a Udisk.Please remove the camera and connect the camera to the computer again; If you are the first time to use the PC camera
mode on your computer, please install the drivers on the CD or dealers provided.
e. Connect the computer: In standby or OFF mode, you can connect the device with the computer. The computer will pop up a removable disk logo. There is an image file directory for: * Disk \ _REC \ 100MEDIA. During video recorder and computer transfer data, the blue light flashes rapidly. For the disconnection, please click ‘SAFELY REMOVE HARDWARE’ on the right bottom corner
of the task bar. Then click to stop the ‘USB mass storage device’. Unplug the USB. The disconnection completes.
Note: According to the computer or system configuration, there will be slight difference for the time of identifying removable disk. Please be patient. During this period, please do not press the button to avoid the bad impact of computer hardware. If the computer does not identify the removable disk long time, disconnect and reconnect the device. If the computer is unable to identify the hardware yet, make sure your operating system, driver and USB cable are all in normal condition. Please make sure to
disconnect the device in accordance with the normal process to avoid the possible damage for computer and recorder.
f. Charge: Connect to computer USB interface or charger. During the charging, the red light flashes slowly. When the battery is fully recharged, the red light stops flashing.
Note: The recorder is with built-in high-capacity lithium polymer battery. The battery is with no memory effect. It can be used and charged at anytime. But for the initial five times of charging, please charge battery to saturation after the battery runs out. It is to activate the battery maximum capacity and maintain the standard working time. In order to maximize the capacity of storage battery, please continue to charge for 30 minutes to 1 hour after the indicator light long bright.
g. Setup time: the video recorder provides the mode to display the video record time in video file, you can set the time and the time display or not according to actual needs; the time display format: "year. month. Day Hours: minutes: seconds", setup times are as
a. Turn off the camera—>to connect the computer—> open the removable disk—> click the right mouse button on blank space of the root directory of the device —>move the cursor on "New" option of the pop-up menu —> select "Text Document"—> named "time" to the text document, need to pay attention to its extension name is ". txt" —> completion of setting up time file; you can set up in accordance with the above steps on your desktop, other disk partition, under the other folder and then copy to a removable disk root directory.
b. Open the "time" text document, input the time settings string, the string is composed of "year. month.Day hours.minutes.seconds show/hide flag", set-up times are as
With time shows: 2009.01.01 12.01.01 Y
Do not show time: 2009.01.01 12.01.01 N
The above time string are the time you want to set, attention to the space between year Month day and Hours minutes seconds, the "Y" and "N" is a flag of time display, "Y" means show the time string on the right corner of the video;"N "mean hide the time string.
The Worlds the most powerful audio Video 2.4GHZ Wireless with Hidden Shoes camera, super crisp real time audio video recording with datetime stamping. Specially designed for Law enforcement agencies for their hidden investigation. This amazing device is ideal for covert or spy operations.
CCD Camera Parameters
Image Sensor :1/4sharpCCD/1/4sonyCCD/1/3sonyCCD
TV System :PAL/NTSC EIA/CCIR
Horizontal Resolution:420 TV Line/520 TV Line/600 TV Line
Picture Elements :500*582(V)(PAL)/510*492(H)(NTSC)
S/N Radio: ≥ 48dB
Y characteristic: 0.45
Sync system : Intenal synchronization
Electronic shutter time: Auto, NTSC:1/60-1/100, 000Sec
Scanning system:NTSC:525Line, 60Field/Sec
Operation temp:-20°C-+65°C RH95%Max
Power supply:DC 3.7V-5V
Lens:Select :M9mm 3.7mm
Output power: 10mW
Frequency :2.4GHz, wireless Video+ Audio
Channel:Four channels optional CH1:2.414GHz CH2:2.432GHz, CH3:2.450GHz CH4:2.468GHz
Wireless Mobile AV Camera Receiver Parameters:
Including lithium battery, persistence power supply of 2hours
Supply voltage：DC+5V/2000mA(inside positive pole outer cathode)
Recordingplaying mode：Normal play, single song repeat, all song repeat
Capacity of memory：Support the SD card with capacitiesof 128/256/512MB/1GB/2GB/4GB
Supporting languages：English, Chinese
PC interface mode：USB2.0Port
Supporting computer systems：Win98SE/ME, Win2000, Win XP
Receiving frequency：CH1:2.414GHz CH2:2.432GHz, CH3:2.450GHz CH4:2.468GHz
Frequency stability：+/- 100 KHz
Input sensitivity：≤ -55dBm
Receiving sensitivity：≤ -85dBm
Video output level：1Vp-p
Audio output level：1Vp-p
Resolving power：480 x 234
Display screen areafactor：49.2 (W) x 38.142 (H) mm
Point areafactor：0.1025 (W) x 0.163 (H) mm
Lamp-house：light emitting diode
Contact Name: Cris
Company Name: Omejo Technology (Hong Kong) Co., Ltd.
Street Address: 16d/118#, Yitian
Village, Fuqiang Road, Futian
District, Shenzhen, China 518000
Member name: omejo
Member Since: 04 May 2009
Total Leads: 999 omejo Import Export Business Leads
Business focus: Spy Camera, Button Camera, Hidden Camera, Cmos Camera, Ccd Camera, Spy Sunglasses, Transmitter, Receivers, Wireless Button Camera, Mini Dvr
Verify: Safe Import Export Tips
Product Category: Security cameras