Hello visitor from USA USA - 25 visiting from USA 20 USA China 1 China France 1 France Germany 1 Germany Russia 1 Russia UK 1 UK
Chat with Suppliers
- DemirPacking (Turkey): Silage, Beet, Corn, Maize, Tmr, Pulp, Manure, Packing, Baler, Round, Fertilizer, Harvester, Chopper http://www.demirpacking.com

Rectifier Transformer

Posted at: Offers to Sell and Export | Posted on: Tue 18 Jul, 2017 7:28 am | Product Category: Electronic transformers [49]
rectifier transformer
Products Photos CatalogRectifier Transformer Photos Catalog

Rectifier Transformer

Rectifier Transformer (ZPS, ZBS, ZSS)

Product Introduction:

Rectifier transformer

is for power transformer with rectifier device. Its role is to provide AC power for the rectifier. Then the rectifier will change AC power to DC power supply. It’s mainly used in the metallurgy, chemical industry and some other industry. It’s low-loss, low-noise, shock resistant, and short-circuit resistant. Rectifier transformer also has the advantages of strong ability of over-load, compact structure, small size, reliability of power supply. 

Product Features:

Stable electrical performance: combing the load feature and the status of fluctuation of electric grid and voltage, atmospheric over-voltage, according to the rectifier transformer load conditions, determine a reasonable and reliable insulation level and insulation model, to ensure the reliable and stable electric performance of the product. Environmentally safe coefficient of the product≧1.67.

High degree of dynamic stability: the winding has a high mechanical strength, with a strong ability of anti contingencies, to meet the bad environment of load. During the process of design and manufacture, it eliminates the dynamic unstable source caused by magnetic leakage or non-normal transportation. The product has high dynamic stability. The resistance is 30% higher than the power transformer with same capacity.

Good thermal stability: advanced product design. The heating part and temperature rise of the hottest dot are strictly controlled, with sufficient temperature margin. If necessary, additional axial oil duct can be added in the coil. Cooling way can be chosen according the load loss value of the coil, then to allocate the oil flow reasonably to reach the best cooling effect. Main temperature rising index is at least 5°C lower than national standard. Copper wire is used as coil and down-lead, selecting low current density.

High ability of overload: the product comes with strong capacity of over-load and over-voltage. It can be operated safely in long-term under the condition of rated load. It can be operated safely in long-term under the condition of 100% full load ( environment temperature 40°C);the terminal on the transformer connected with the motor can bear 1.5 times the rated current, which is 5S. Load character is fully considered during the product design and manufacturing. Temperature rising, insulation properties and choice if attachment are considered to meet the overload requirements.

Superior performance index: no-load current design. Manufacturing capacity is lower than that of normal transformers with same capacity that regulated by national standards.

Obvious energy-saving, low noise

Simplified structure, elegant appearance. The oil tank adopts the technology of anti-leakage to avoid the leakage, eliminating the fuel tank leakage.

Product structure

Core: it adopts high magnetic silicon steel sheet. Meanwhile, it adopts the three-six step lap core stacking stepping style. No-load, no-current and noise are reduced effectively.

Winding: we use high conductive non-oxygen copper wire as the electric magnetic wire. The structure of cylinder type, double-cake type and new spiral type with whole set of new technology is used for the winding. Thus our product structure is more compact and the main insulation to be able to get effective guarantee. Layers on both has been strengthened which improved the insulation performance. We enwind the high strength constructive belt to the outer surface of the winding which improve its mechanical capability. Its anti-impact ability and anti-short circuit are improved largely.

Body: insulation pad with both high strength laminated wood and laminated cardboard support is used for the body. The support area of the winding end reaches more than 95%, which improves its anti-short circuit further and improves its operation stability. The connection of the body and cover is the plate with buffer structure to overcome the phenomenon of “impending” and “coping”. Insulation material is coiled with high-intensity, high-density cable package of which the allowed pressure is 45 Mpa.

Tank: Heating radiation oil pipe(double row and three rows of pipe with inserting slice type) or using ladder Chip radiator is used for the tank. The ability is increased under the same area of the tank wall. According to customers requirements, we can also install chip radiator or corrugated tank, and oil-cooled or water-cooled radiator. Treatment of the tank surface: coat paint of the transformer id “three resistance paint”(anti-salt spray, anti-humidity and anti-mildew). The adhesion of the out paint and inner paint is strong. The decoration is good. The oil resistance of film, corrosion resistance and light fastness are good. It also comes with good covering strength.

Applies for Rectifier circuit:

Normal rectifier circuit used is single-phase half-wave, single-phase full –wave, half wave three-phase, three-phase full-wave(Y or △) bridge, three-phase flexural type(the Zo-shape), six-phase Y-shape (mid-point wiring), the six-phase Fork shape(also flexural shape), six Y-shaped parallel bridge type(with a balance reactor), the six-phase △ type, Y-shaped series-wound bridge type, 12-phase four flexural type with balance reactor, the six-phase Y-shape or △type, six phase(12, 24 phase) double anti-star with a balance reactor, or more sets of  parallel bridge type, double anti-star circuit. DC current can be up to 25kA, the DC voltage from tens of volts to several hundred volts, the valve side is often used in parallel with the inverse method to qualify.

Company Contact:

No member photo
Contact Name: Fraceen Jin
Company Name: Channel International Ltd.
Email: Email
Tel: +86-021-61071577
Fax: +86-021-61077317
Street Address: Rm 1001, Ruifeng
International Building, No.248
Yangshupu Rd., Hongkou Dist
Shanghai, Shanghai 200082
Website: http://www.ehearttransformer.com/
Member name: ehearttransformer
Country: China-CN China
Member Since: 18 July 2017
Total Leads: 18 ehearttransformer Import Export Business Leads
Business focus: Special Transformer, Dry Type Tansformer
Chat: leave me a chat message
Verify: Safe Import Export Tips
Product Category: Electronic transformers [49]

Similar LeadsSimilar Suppliers And Manufacturers Import Export Trade Leads

  • Casing Of Transformer Casing Of Transformer - By ehearttransformer - On Tue 18 Jul, 2017 7:46 am: transformer product introduction it is not necessary for general dry-type transformer to equip casing means the protective degree is ip00 if need ....

  • Transformer Grating Transformer Grating - By AnpingMengke - On Thu 29 Jun, 2017 8:53 am: transformer project you may need the transformer grating in advance then you raise the transformer on the grating and lay the cobblestone on the gra....

  • Pv Power Generation Transformer Pv Power Generation Transformer - By ehearttransformer - On Tue 18 Jul, 2017 7:36 am: transformer new energy dedicated transformer product introduction in order to meet the needs of our national pv power generation our company devel....

  • Modulating Capacity Transformer Modulating Capacity Transformer - By ehearttransformer - On Tue 18 Jul, 2017 7:29 am: transformer special transformer modulating capacity transformer is one kind of distribution transformers which has two capacities one is small a....

  • Power Transformer 35kv Power Transformer 35kv - By ehearttransformer - On Tue 18 Jul, 2017 7:18 am: transformer 35kv oil-immersed transformer products structure and technical features the oil-immersed transformer produced by our factory have the....

  • Transformer Tap Changer Transformer Tap Changer - By LiaoningJinliElectricPowe - On Fri 22 Dec, 2017 1:02 am: transformer tap changer such as oltc off circuit linear tap changer off circuit cylindrical tap changer etc with 30 years experience our products ....

  • Transformer Coil Winding Machine Transformer Coil Winding Machine - By Huaaoelectricity - On Thu 07 Mar, 2019 2:43 am: transformer coil winding machine for voltage transformer is the special device designed according to the technology requirements of domestic enclosed ....

  • European-type Transformer Substation European-type Transformer Substation - By ehearttransformer - On Tue 18 Jul, 2017 7:32 am: transformer substation box-type transformer substation product introduction xbf1 ybm series combination substation is a complete set of equipmen....

TradersCity Free Import Export Trade Leads B2B Board  Offers to Sell and Export
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely