Refrigerator Side Panel U-shape shell, Left and right shells Roller forming Full line
This line, which
is mainly used to manufacture U-shape shells, generally consists of loading machine, punching machine,180° overturning machine, rolling machine, Z-L shape bending machine, U-shape bending machine, conveying line, pneumatic system, hydraulic system, electric control system and etc.
1、outer dimensions of the line: L×W×H = 35000×3000×1800mm
2、working height of the line: 900mm (above the floor)
3、dimensions of the applied sheets: length: 1400～4200mm
4、applied sheets: cold-rolled steel sheet or coated steel sheet or PCM sheet
5、dimensions of the finished products: U-shape shell:
6、time of production cycling: 30s
This line can be designed and made in accordance with customers speciaI requirements of processes
This roller-forming line consists of following parts: Automatic loading machine、Notching machine 、Turnover machine、Roller forming machine、Z-L shape bending machine、U shape bending machine、Pneumatic system 、Hydraulic system and Electric control system and etc.
Refrigerator production line from preassembly line, final assembly line, testing line and packaging line to whole project such as special purpose machine for other parts
The production line including the the following steps according to general fridge producing processing and layout:
1. Fridge cabinet pre-assembling line( with rubber on conveyer to safeguarding the surface quality of fridge cabinet) ;
2. Conveying into the cabinet foaming conveyer system for foaming and the foamed cabinets will be transported out to the deposited line area(generally amounts are between 100-200sets foamed cabinet, another advantage is to classify the fridge specification in line to wait for into assembling line sequently and orderly.
3. Vacuuming circling line with pumps fitting trolleys: the vacuum pump’s amounts will be decided according to production capacity/per year /per single shift.
4. Refrigerant injection machine section.
5. Compressor ‘s sealing and welding after refrigerant injection.
6. Leakage inspection sector.
7. Section for Intelligent comprehensive safety tester(fridge safety inspection)
8. production test system is used to test refrigerating and safety performances of refrigerators.
Processing flow: When refrigerators enter into commercial test room, they are distributed to test lines. When a test line is full, power plugs are plugged in and the probes are put in place to start reading the bar code of each refrigerator. When the bar codes are read, the data of the refrigerators are entered into the computer. Then, power is supplied to 10 as a group, and the test of the refrigerators begins. When the test is completed, the probes are moved away and power plugs are unplugged. Moreover, it can be manually selected to print out refrigerator test curves and general test report and automatically print out nonconforming test curves and general test data.
9. Packaging line section(generally it’s length is about 20m with a slent roller line to ground.
The section of reparing after finding un qualified refrigerators by inspected and checked.
Door Shell Forming Line For Refrigerator Door Sheet
According to general layout ,This line is mainly consisted by autom-loading machine, punching machine, 90°bending machine, arc bending machine, unloading belt conveyor, pneumatic system, hydraulic system and electric control system.
The working procedures are as follows: Loading the raw sheet in given dimension → Automaticlly finish the forming work → Manually take down finished work-pieces. This line is mainly used for manufacturing of circular arc and flat refirgerator door sheel.
Main technical specifications
1. Numbers of workstations: 5
2. Cycle time: 25sec/piece;
3. Outline dimension（For reference only）: 14000x3000x1500mm;
4.Work-pieces dimension of form: Length*Width(350~1500mm)*( 450~800mm);
5. Working Height: 900mm to the ground;
6.Applied Material: Pre-paint sheet, VCM sheet and no-varnish sheet;
7.Thickness of sheet: 0.4~0.6mm;
8.Electricity: about 10KVA(380V, 50HZ)
9.Compressed air supply: 0.5~0.65Mpa
The equipment may be designed and manufactured in accordance with customers special requirements.
Contact Name: Leo Zhang
Company Name: Elite Cooling Appliances Equipment Co., Ltd
Tel: 86 550 2120058
Fax: 86 550 3219275
Street Address: Economic &Technological Development Zone of Chuzhou, Anhui Province, China
Member name: Leizhang112
Member Since: 16 May 2008
Total Leads: 6 Leizhang112 Import Export Business Leads
Business focus: Refrigerator Producing Machine, Refrigerator Machinery, Fridge Machine, Thermo Forming Machine, Refrigerator Foaming Machine, Refrigerator Roller Form
Verify: Safe Import Export Tips