TBM and bored pile are both civil construction way in nowadays life and city construction. We need to
construct our city also conserve our environment. The desanding plant or slurry separation system is rather necessary
Desanding Plant Working Procedure
1. A set of submersible slurry pump will pit up mud from mud pit, the length of pump under fluids normally 800mm to 1500mm. Solids particles not allowed larger than 1cm to protect pump impeller, so there is a protect mesh installed at mump inlet.
2. The mud will goes into shale shaker bottom deck by a PU material shaker screen for big solids separation. There are two panel screens, 3 panels screen or 4 panels screen for the bottom deck depending on mud flow requirement. The solids particles will discharge out through shaker screen and clean mud drop into mud tank compartment.
3. There is a pump pick up mud from mud tank compartment and feed into cyclone, the solids out of cone will drop on top of shaker deck for solids drying and clean mud over flow from cyclone will flow into a intermediate box. There is an auto control to allow clean mud goes into mud tank compartment or flow away.
Main features of Aipu desanding plant
Dry Cuttings Discharge (30% water content).
Low Energy Consumption.
Easy Maintenance (Less Consumable Items).
High Efficiency Of Recycling Mud.
High Mud Flow Treating Capacity.
Separation Size Adjustable.
High Intelligent Level.
Tank Over Flow Protection.
Hard-Wearing Slurry Pump.
Italian Oli Brand Motor.
Contact Name: Jessie
Company Name: Aipu Solids Control
Street Address: 4th Jingyuan Road,
Jinghe Industry Zone
Xi'an, Shaanxi 710200
Member name: aipusolidcontrol
Member Since: 11 July 2017
Total Leads: 172 aipusolidcontrol Import Export Business Leads
Business focus: Solids Control Equipment, Shale Shaker, Mud Cleaner, Centrifuge
Verify: Safe Import Export Tips
Product Category: Production desanding equipment