-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 92 visiting from 82 USA 
4 Singapore 
4 UK 
1 India 
1 China
Hello visitor from
USA - 92 visiting from 82 USA 4 Singapore 4 UK 1 India 1 China
- altinsoymarble (Turkey): Marble, Natural Stone, Travertine, Limestone, Emperador, Olive Maron, Bursa Beige, Uludag White,... http://www.altinsoy.com.tr
Split Case Pump
Posted at: Offers to Sell and Export | Posted on: Tuesday 8 May 2018 8:10 am | Poster last visit: Tuesday 8 May 2018 |
Product Category: Main
» Distribution and Conditioning Systems and Equipment and Components
» Fluid and gas distribution
» Valves
» Pump valves
» Split Case Pump
Product Description:Split case pumps is suitable for transferring various liquids, such as clean liquids or neutral liquids
with particles or weak-erosion liquids with particles. The product is applicable to water supply plant, agricultural irrigation, power station, drainage in pumps station, water supply system in the industrial field, air-conditioning system, fire-fighting system, boat and ship industry as well as oil refining industry as an general equipment.
B. Split Case Pumps Scope of Performance:
Diameter of pumps inlet DN 100-1400mm
Capacity Q 0~18000m3/h
Head H 0~ 135m
Working Pressure P 0~ 2.5MPa
Working Temp. T 0~135℃
C. Split Case Pumps Structure lnstruction:
S series pumps is the single grade, double absorption, horizontal, axial split, volute, centrifugal pumps. The inlet and outlet of the pumps are both located under the shaft centerline and distributed horizontally.
Components & spare parts lower casing, upper casing, impeller, shaft, wearing ring etc.
There are some pipe threaded holes designed for installing vacuum gauge and pressure meter on the pump's flange, and on the bottom of the flange, pipe threaded holes are made for draining of water. The pumps flange is manufactured according to GB standard, is also can be made by adopting ISO, DIN, BS or ANSI standards. The impeller checked by statically equilibrium is fixed on the shaft by shaft sleeves and shaft sleeve nuts. The axial position can be adjusted by shaft sleeve nuts. For the balance of the axial thrust of the impeller, it can use the symmetrical arrangement of the vanes of the impeller to meet the balance requirement.
The pumps shaft is supported by two sets of bearing which are installed on the two ends of the lower casing and are lubricated by oil grease.
The wearing ring is equipped with the lower casing, and they are convenient to dismantle and replacement. The pumps are directly driven by the motor through flexible or metal reiterative chip of flexibility coupler. The driver also can be substituted by the diesel engine and steamer engine.
The pumps can be sealed by packing or by mechanical seal The cooled washing water can flow into the shaft sealing house through the concave groove on the split surface of the upper casing, or through the outer cooled water pipe equipped.
When inspecting series S pumps, it is not required to disassemble the inlet and outlet pipe and motor, it is easy for maintenance.
The structural size of the pumps can be changed as the customers' requirement.
D. Split Case Pumps Rotary Direction:
Looked from the end of the motor, the rotary direction of the pump's shaft is clockwise (the pump's inlet is on the right). It also can be changed to the counterclockwise direction, the symbol of the pumps is an additional character "F" added at the end of pumps model (please see the following model instruction)
E. Split Case Pumps Material:
If there are not any special requirements from customers, the material of the main components of the pumps is as the following: Lower casing, upper casing, impeller, wearing ring and shaft sleeves are all made of grey cast iron.
The pumps shaft is made of 45# carbon steel. It also can be made of 410 S.S., 40Cr, etc.
Other liquid-flowing parts and components can be made of the materials: such as ductile cast iron, cast steel bronze and stainless steel.
Company Contact:
Contact Name: Jeasin Zhang
Company Name: Shanghai Shinjo Valve Co., Ltd.
Email:
Tel: 86-21 5620 6641
Fax: 86-21 5641 2609
Street Address: No 150, Honxing
Road, Shanghai, China.
Shanghai, Shanghai 200000
China
Website: http://www.shinjovalve.com
Member name: ShanghaiShinjoValve
Country: China
Member Since: 12 January 2017
Total Leads: 28 ShanghaiShinjoValve Import Export Business Leads
Business focus: Valves, Ball Valves, Check Valves, Gate Valves
Chat:
Verify: Safe Import Export Tips
with particles or weak-erosion liquids with particles. The product is applicable to water supply plant, agricultural irrigation, power station, drainage in pumps station, water supply system in the industrial field, air-conditioning system, fire-fighting system, boat and ship industry as well as oil refining industry as an general equipment.
B. Split Case Pumps Scope of Performance:
Diameter of pumps inlet DN 100-1400mm
Capacity Q 0~18000m3/h
Head H 0~ 135m
Working Pressure P 0~ 2.5MPa
Working Temp. T 0~135℃
C. Split Case Pumps Structure lnstruction:
S series pumps is the single grade, double absorption, horizontal, axial split, volute, centrifugal pumps. The inlet and outlet of the pumps are both located under the shaft centerline and distributed horizontally.
Components & spare parts lower casing, upper casing, impeller, shaft, wearing ring etc.
There are some pipe threaded holes designed for installing vacuum gauge and pressure meter on the pump's flange, and on the bottom of the flange, pipe threaded holes are made for draining of water. The pumps flange is manufactured according to GB standard, is also can be made by adopting ISO, DIN, BS or ANSI standards. The impeller checked by statically equilibrium is fixed on the shaft by shaft sleeves and shaft sleeve nuts. The axial position can be adjusted by shaft sleeve nuts. For the balance of the axial thrust of the impeller, it can use the symmetrical arrangement of the vanes of the impeller to meet the balance requirement.
The pumps shaft is supported by two sets of bearing which are installed on the two ends of the lower casing and are lubricated by oil grease.
The wearing ring is equipped with the lower casing, and they are convenient to dismantle and replacement. The pumps are directly driven by the motor through flexible or metal reiterative chip of flexibility coupler. The driver also can be substituted by the diesel engine and steamer engine.
The pumps can be sealed by packing or by mechanical seal The cooled washing water can flow into the shaft sealing house through the concave groove on the split surface of the upper casing, or through the outer cooled water pipe equipped.
When inspecting series S pumps, it is not required to disassemble the inlet and outlet pipe and motor, it is easy for maintenance.
The structural size of the pumps can be changed as the customers' requirement.
D. Split Case Pumps Rotary Direction:
Looked from the end of the motor, the rotary direction of the pump's shaft is clockwise (the pump's inlet is on the right). It also can be changed to the counterclockwise direction, the symbol of the pumps is an additional character "F" added at the end of pumps model (please see the following model instruction)
E. Split Case Pumps Material:
If there are not any special requirements from customers, the material of the main components of the pumps is as the following: Lower casing, upper casing, impeller, wearing ring and shaft sleeves are all made of grey cast iron.
The pumps shaft is made of 45# carbon steel. It also can be made of 410 S.S., 40Cr, etc.
Other liquid-flowing parts and components can be made of the materials: such as ductile cast iron, cast steel bronze and stainless steel.
Company Contact:
Contact Name: Jeasin Zhang
Company Name: Shanghai Shinjo Valve Co., Ltd.
Email:
Tel: 86-21 5620 6641
Fax: 86-21 5641 2609
Street Address: No 150, Honxing
Road, Shanghai, China.
Shanghai, Shanghai 200000
China
Website: http://www.shinjovalve.com
Member name: ShanghaiShinjoValve
Country:
ChinaMember Since: 12 January 2017
Total Leads: 28 ShanghaiShinjoValve Import Export Business Leads
Business focus: Valves, Ball Valves, Check Valves, Gate Valves
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
R32 Split Air To Water Heat Pump 8 16kw - By outes - On Wednesday 28 February 2024 3:50 am: split air to water heat pump 8 16kw
new split type r32 heat pump for house heating cooling and domestic hot water amp #65292 total solution for space....
Heavy Duty Double-case Slurry Pump - By sgbslurrypump - On Friday 25 November 2022 3:23 am: pump
structural features
single stage single suction double-case horizontal centrifugal pump
wet parts such as casing impeller liner plate i....
Immersion Multistage Centrifugal Pump / Coolant Pump - By shoufei - On Tuesday 18 October 2022 6:03 am: pump installed with standard motor the motor shaft is directly connected with the pump shaft by coupling according to the requirement the pump can....
Bicycle Battery Case - By thaishunco - On Saturday 17 February 2024 2:54 am: case manufacturing
thai shun specializes in producing high-quality bicycle battery cases and offers a comprehensive range of tube processing services....
Custom Disposable Case Mirror Wipes Car - By lihua - On Thursday 13 October 2022 3:01 am: custom disposable case mirror wipes car
car wet wipes are a great way to clean your vehicle and keep it looking new car wet wipes are a convenient and easy way to keep your car clean th....
Monoblock Case Packer Cartoning Machine For Packaging Stand Up Pouches - By CalmusMachinery - On Wednesday 18 January 2023 4:03 am: case packer monoblock cartoning machine for packaging stand up pouches this is a fully-automatic form-insert-seal monoblock cartoning machine for s....
Form-insert-seal Case Packer Monoblock Cartoning Machine - By CalmusMachinery - On Friday 17 February 2023 4:14 am: case packer for packaging bricks this case packer is a form-insert-seal 3-in-1 cartoning machine with corrugated cases cartons forming filling and s....
Cartoning Machine Monoblock Case Packer For Packaging Butter Bricks - By CalmusMachinery - On Wednesday 12 July 2023 8:51 am: case packer with corrugated cases cartons forming inserting and sealing functions it stacks butter bricks in multiple layers and then pushes them in.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Shanghai Hold Heavy Industry Co Ltd: Warren Guo Of Shanghai Hold Heavy Industry, A Manufacturer Of Various Concrete Construction Machinery From China
- Hifine International Enterprise Limited: Eleven Wu Of Hifine International Manufacturing Bags From China
- Shenzhen RiOu Refrigeration Machine Equipment Co Ltd: Vivian Hu Of Shenzhen RiOu Refrigeration Machine Equipment Company From China
- Wenzhou Joy Autoparts Co Ltd: Vivian Of Wenzhou Joy Auto Parts From China
- Aisi Machinery Co Ltd: Donald Of Aisi Machinery, A Supplier Of Concrete Machinery From China
Pump valves Classification Navigation
Main - Distribution and Conditioning Systems and Equipment and Components - Fluid and gas distribution - Valves - Pump valves [11]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely