LED T8 LED Tube, 2 ft, Warm White, 8 Watt, 108 LED, 85-265VAC, Clear PC Lens
White @ 3500K
Day White @ 5500K
Cool White @ 6000-7500K
Dimensions: 2 foot length
Central Lux: 80 Lux/3m
Lighting Angle: 120 degrees
Life Hours: Up to 100, 000 Hours
LED Count: 108 LED's
Housing temperature: Less than 35 deg C
Ambient Temperature: F, -40 to 113
Replaces: 20 watt T8 Fluorescent
Working Voltage: AC 85-265VAC
Net Weight: .23KG
Features & Benefits:
Our LED T8 Fluorescent Light Tube consists of high quality LEDs and can emit a higher brightness at much lower cost.
Our LED T8 Fluorescent Light can be easily installed like a conventional T8 fluorescent light into the existing sockets.
With very little heat output, proper drive characteristics and high quality LEDs, our LED T8 Fluorescent Light Tube has a lifetime of up to 100, 000 hours.
The LED T8 Tube is manufactured under ROHS, contains no MERCURY, Emits NO RF interference!!
With IP54 degree protection, our LED T8 Tube Light can operate normally even in a moist indoor environment.
Our LED T8 Fluorescent Lights consume power from 8W to 18W. This saves much more energy than conventional fluorescent T8 light tubes.
The LED T8 Fluorescent Light Tube is completely enclosed. The LEDs are surrounded by a Frosted acrylic lens and emit light like a conventional T-series fluorescent light. Our LED T8 Tube is typically used for lighting in Garages, Basements, Task Lighting, Store Displays, General Warehouse Lighting, RVs, Buses, and Under Cabinets, Storage Facilities, Generator Powered Remote Sites, Cold Storage, Solar Installations and more. It can be used anywhere you have a T8 series fixture!
Available in four different color temperature renderings:
Warm White: 3700 Kelvin; ~ 1500 lumens - Yellowish Light
Daylight White: 5500 Kelvin; ~ 1550 lumens
Cool White: 7000 Kelvin; ~ 1600 lumens - Bluish Light
No Hum or Buzz
Instant Start; No Flickering
ROI - 18 to 24 months (even quicker with increasing electric rates!)
Patented Power Rectifier - Will not inject RF interference onto the power line. Excellent for X-10 or other powerline Home Automation installations!
Patented Aluminum extruded backing heat sink in aluminum
Limited Manufacturer Warranty
Aluminum heat sink, 108 LED's, available in Warm White, Day White or Cool White, No UV or RF interference, Patented heat sink and optical diffuser, longer life than incandescent & fluorescents . No mercury, no ballast required, wide voltage and constant current design, solid state, high shock & vibration resistant, Mercury free, 50%+ savings in energy consumption, quite, no noise, no flickering, The products are in accordance with CE, UL and FCC testing standards, Retro-fit kits available for direct replacement of fluorescent fixtures. MET/CE/FCC Approved. Limited manufacturer warranty
This LED replacement tube can operate on a traditional ballast and starter without modification. We strongly recommend that a qualified individual remove any ballasts and starters to achieve full energy savings.
Due to the fact that this tube light can operate in both line and magnetic ballast mode, this tube does quickly flash then turn on after the driver senses the incoming voltages. This only happens on power up and is considered normal operation for this tube light.
Contact Name: John Huang
Company Name: Vdeen Lighting Co., Ltd
Street Address: No. A, Gu2 Industrial Zone,
Guzhen, Zhongshan, Guangdong, China
Member name: vdeen
Member Since: 04 April 2009
Total Leads: 944 vdeen Import Export Business Leads
Business focus: Energy Saving Bulb, Halogen Bulb, Compact Fluorescent Lamp, Energy Saving Reflector Bulb, Led Light Bulb, Led Tube Light, Down Light, Ceiling Light
Verify: Safe Import Export Tips