F series mud pumps are applicable to the requirement of high pump pressure in oilfield and high displacement
technology of well drilling with its solid and compact structure, small volume and outstanding operation performance. F series mud pumps have long stroke maintaining operation at lower frequency resulting in enhancing the performance of giving water effectively and prolonging the lifetime of the consumable hydrokinetic parts. The air-suction kit is advanced in structure and reliable at operation to reach the optimized absorbing target of air suction into line pipe. F series pump powering side adopts the combined lubrication of forced and flashing lubrication featured with reliable lubrication and adding the operation lifetime of powering part.
F-1000 single acting triplex mud pumps are authorized by Continental Emsco Company to manufacture in China and fully conform to Continental Emsco Company"s technical requirement.
F-1000 mud pumps are rated at longer stroke length and relatively low stroke per minute. It can increase the service life of expendable parts of fluid end assembly.
The fluid end assembly mainly consists of fluid end, valve assembly, liners and pistons. Fluid end is made of forged alloy steel and three fluid ends of each pump are interchangeable. The suction valve and discharge valve of F mud pump are interchangeable. Liners use Bi metal, the sleeve is made of wear resisting cast iron. Piston and piton rod are of slide fit and sealed with rubber seal rings and are fastened with lock nuts to prevent the piston from loosing.
The valve seat bores have bottom shoulders. The piston and liners are spray lubricated and cooled which allow an extended service life.
F-1600 mud pump is horizontal triplex single acting piston pump.
Rated power: 1176kw (1600hp)
1. Stroke length: 12" (305mm)
2. Rated strokes per minute: 120
3. Gear ratio: 3.657/4.206
4. Rated rotating speed: 438 r/min
5. Diameter of suction inlet: 12"
6. Diameter of discharge outlet: 4"
7. Weight: 59,745lbs (27100kg)
Contact Name: Jessie
Company Name: Qingdao Hna Oilfield Equipment Manufacturing Co.ltd
Street Address: No 39 Xinghe Road,
Industrial Zone, Lancun Town, Jimo,
Qingdao, China 266232
Member name: jessiehainuoao
Member Since: 01 September 2009
Total Leads: 21 jessiehainuoao Import Export Business Leads
Business focus: Drilling Rigs Parts, Mud Pump, Mud Pump Spare Parts
Verify: Safe Import Export Tips
Product Category: Mud pumps