Hello visitor from USA USA - 78 visiting from China 45 China France 16 France USA 13 USA India 1 India Ireland 1 Ireland Japan 1 Japan Russia 1 Russia
Free Join Now   B2B Chat Center
 
This Month's Highlights:
- PrintLabels (China): Print Labels, Stickers, Tags, Epoxy Resin Stickers http://www.inecreative.com
- Sayhi0307 (China): Shipping Rates From China, Air Freight Rate From China, Ocean Freight Quote, Shipping Cost, Shipping Price, Freight Quote http://www.sztaizhou.com
 
 
 

Used Complete Crumb Rubber System Tire Recycling

Posted at: Offers to Sell and Export | Posted on: Mon 29 Oct, 2007 2:07 am |
 
crumb rubber system tire recycling
Products Photos CatalogCrumb Rubber System Photos Catalog



Used Tire Recycling Equipment

Our Offer Number: Sidra-twi200106-eidal


Eidal Slow Speed Shear Shredder

This

Unit Is A Eidal Slow Speed Shear Shredder With A Feed Opening Of 114" Long X 52" Wide. 2" Single Hook Knives On 19" Shaft Centers. Bignozzi Hydraulic Drive Powered By A 400-hp Detroit Diesel Engine. Prentice 48" Grapple System, Cab/controls, Stand, Hopper. Only 280 Hours On Engine! Excellent For Metal, Tires, Aluminum, Plastics, Msw, C&d

Our Offer Number: Sidra-twl010206-alpine

Alpine Rotoplex Granulator

This Granulator Was Previously Used In A Crumb System. It Is Powered By A 125-hp Electric Motor. Includes Electrical Box And New Cutting Blades. Can Also Process Fiber, Film, Purgings, Wire Adn Cable, And Many More Difficult Materials At A Capacity Rate Of 3300 Lbs. Per Hour.

Our Offer Number: Sidra-twc070303-bagging

Bagging System (taylor) With Chetland Bagger

Taylor Bagging System - Chetland Model 4231/125 Weighing Gravity Feed Open Mouth Bagger With Air Powered Cut-off Gate And Dump Doors, 1? Cu. Ft. Weight Bucket. Voltage 120/1/60, Controls Std Dwm-1 W/ss Nama 4 Box, Spouts 4?" Round. Includes Hutchison 30'x6" Screw Auger With Hopper.

Our Offer Number: Sidra-twf060107-columbus

Columbus Mckinnon Portable Tire Shredder

This Portable System Is Powered By A 250-hp Electric Motor. Can Process 48" Maximum Diameter Of Tires At A Capacity Rate Up To 20 Tons Per Hour. System Is Also Equipped With A Genset And A 2" Classifier. Needs Some Repairs.

Our Offer Number: Sidra-twf170503-compact

Compact C-3000 Four-screen Granulator With Magnetic Separator (crumb Rubber)

This Unit Is In Very Good Condition. Can Produce Four Sizes Of Crumb At Same Time: 10 Mesh, 50 Mesh, 80 Mesh And 100 Mesh. Magnetic Separator Removes The Steel; Aspirator Collects All Cord And Fluff Materials. Totally Self-contained

Product Passage Scheme:

The Rubber In Pieces Is Loaded Onto The Hopper And Enters The First Stage Of The Head Where It Is Triturated By A Series Of Blades With Large Toothing. From The First Stage, The Rubber Drops Down To The Second Stage Where It Is Triturated By A Series Of Blades With Finer Toothing. From The Second Stage, The Rubber Drops To The Third Stage Where It Encounters Two Rollers With Fine Helicoidal Teeth, With A Variable Pitch, Which Cuts The Pieces Being Processed Into Even Smaller Pieces. From The Third Stage, The Rubber Enters The First Mill Through A Side Path, Crossing It Sideways Passing Through A Series Of Blades, Undergoing Initial Coarse Granulation During This Stage.

From The First Mill, The Material Enters The Transporter Featuring The Deferizzer Which Separates The Iron From The Rubber To Offload It From The Machine Through Its Belt. The Granulated Rubber Follows Its Path In The Transporter, From Which It Is Conveyed To The Archimedes' Screw Which Sends It Upwards Before Offloading It In The 4th Stage Of The Head. In This Stage, The Rubber Encounters Two Rollers With Fine Helicoidal Toothing And Undergoes Further Reduction Of Granules Before Dropping Straight Down Into The Second Mill. Continuing Its Path, The Material Crosses The Second Mill Passing Through A Series Of Blades And Undergoing Further Trituration.

From The Second Mill, The Material Enters The Sieve Where It Continues As Follows: The Finer Sieved Part Passes Through The Deferrizer And Drops Into Archimedes' Screw To Continue The Cycle; The Coarser Unsieved Part Is Sucked In By The Secondary Cyclone Through Duct 7 That Recycles It Through The Star Valve And Duct 10 As Far As The First Mill. The Deferrizer Removes The Remaining Finer Metal Particles And Offloads Them From The Machine.

The Conveyor Collects The Material Sucked In By The Main Cyclone Which Offloads It Through The Star Valve. It Is Equipped With Coarse Mesh To Hold Back The Textile Fibers (hairs) Which Are Already Separated And That Are Taken In By The Sleeve Filter Through The Duct Equipped With A Valve To Adjust Suction. The Coarser Part Drops Into The Conveyor, Through Duct 9, To Be Treated Once Again. The Rubber, In Larger Granules, Is Taken In Once Again By Cyclone Through Duct 7 To Return To The First Mill; The Finer Rubber, Sieved By The Conveyor Sieve, Continues As Far As The Deferrizer.

The Rubber In Granules, From Which The Iron And A Small Part Of The Textile Fiber Has Been Removed, Ascends On The Other Side Of The Machine To Conveyor Through Archimedes' Screw. When The Material Is Not He Conveyor, We Have Two Possibilities: To Offload The Whole Product Through Valve Va From Duct C, Or To Continue The Sieving Cycle

Our Offer Number: Sidra-twc200107-cryogenic

Complete Cryogenic System

This System Consists Of Two Lines, Each Producing 3000-4000 Pounds Per Hour. Several Screens And Pulverizers To Produce Minus 14 To Minus 80 Mesh From 1" Nominal Chips. System Includes: Two Pulva Model D Hammer Mills, One Enviro Dynamics Dryer, One Bm&m Two-deck Screener With Four Screens, One Praxair 18" Precooler, One Praxair Upright Precooler, Two Rotex Three-deck Screeners, Three Large-capacity Screw Hoppers, One Large Capacity Hopper With Drag Chain Assembly, One 350-hp Grinder, One 250-hp Grinder, One Magna Tech Double Rotor Hammer Mill, Two Talc Feeders, One Meter-controlled Feed Hopper, Two 20' Stainless Steel Screws, One Double Drum Magnet, Two Kinergy Vibrating Separator, One Minox Three-deck Screen System, One 36' Flat Conveyor, One 120' Screw Conveyor, One 30' Screw Conveyor, Eleven 20' Screw Conveyors, One 10' Screw Conveyor, Two Stainless Steel Airlocks, Nine 10"-diameter Rotary Airlocks, Four 16" Rotary Airlocks, Assorted Conveyors, Several Unused Screens, 2000 Cpm Bag House, Kramer Bag House.

Our Offer Number: Sidra-twa180607-crumb

Complete Crumb Rubber System

This System Consists Of An Ssi Shredder And A Cumberland Granulator That Were Replaced New Last Year. Also Includes A Complete Operating System To Produce Top Quality Playground, Landscaping And Equestrian Use Rubber Product From Whole Passenger And Light Truck Tires; Complete Automatic Production Line To Color, Blend And Dry Rubber To Produce Industry Standard Colored Material; Complete Bagging Operation Capable Of 10-60 Lb. Bags Of Various Sizes Of Material, Heat Seal Or Sewn Bags; Other Miscellaneous Conveyor Systems For Weighing And Loading Overhead Bulk Containers; Pre-existing Customer Base Of Over Two Million Pounds/year.

Our Offer Number: Sidra-twa220107-crumb-farrel

Crumb Rubber System

This System Consists Of A Heavy Duty Double Roll Farrel Cracker Mill, Alpine Rotoplex Granulator, Forsberg P-4 Screen/destoner, Forsberg Model 510 Three-screen Separator, Forsberg Model 50 Vms Vacuum Gravity Separator, Cooling Tower, Conveyors, Augers And Bucket Conveyors. The Bagging System Is A Super Sacker To Fill Two-ton Bags.

Our Offer Number: Sidra-twh050104-eco Flock

Eco Flock 1000 System With Curing Tunnel

Age: 1999

The Eco Flock 1000 System Consists Of A Three, Steel Roller, Distribution System. There Are Two Flocking Sieves And Four Collecting Drawers For Flocking Material. The Flock Is Applied By Means Of A Variable Voltage Electrostat, And A Variable Speed Conveyor Governs The Throughput Speed. The Curing Tunnel Is A Fully Insulated Heating Chamber With A Variable Speed Conveyor. There Are Six Infrared Heating Elements That Are Temperature Controlled By Three Thermostats And Can Be Operated From The Control Panel.

Specifications:

Plexiglass Hopper: 20 Mm Thick (11.8" X 36" X 43")

Brush: 9.5" In Diameter X 36" Wide

Speed Conveyor: 1'-6" X 3'-4"

Curing Tunnel: 16'-5" X 3'-7" X 1'-11"

Conveyor: 16'-5" X 3'-4"

Price Upon Request

Pictures Upon Request

Subject To Prior Sale

The Above Information Is Correct To The Best Of Our Knowledge,

But We Cannot Be Held Responsible For Any Errors Or Ommissions.

For Further Information I Am Gladly At Your Disposal.

Regards,

Sidra (miss)



Company Contact:

No member photo
Contact Name: Sidra (Miss)
Company Name: Sidra Commercial Trading Company
Email: Email
Tel: 92-0300-4705383
Fax: 92-42-6558083
Street Address: P.O.BOX 2504,
G.P.O., Lahore - 54000, Pakistan
Member name: Sidracommercialtradingcom
Country: Pakistan-PK Pakistan
Member Since: 26 October 2007
Total Leads: 801 Sidracommercialtradingcom Import Export Business Leads
Business focus: Portland Cement, Sugar, Urea, Scrap, Used Power Plants, Used Generators, Used Machine Tools, Used Processing Plants, Used Plastic Machinery
Chat:
Verify: Safe Import Export Tips
 
 
 

Similar LeadsSimilar Suppliers And Manufacturers Import Export Trade Leads

Start Import Export Stories Import Export Startup Stories

Share Your Story & Get Listed at StartImportExport.com

 
 
 
TradersCity Free Import Export Trade Leads B2B Board  Offers to Sell and Export
 
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely