Hello visitor from USA USA - 81 visiting from China 48 China France 18 France USA 12 USA India 1 India Singapore 1 Singapore UK 1 UK
Free Join Now   B2B Chat Center
 
This Month's Highlights:
- PrintLabels (China): Print Labels, Stickers, Tags, Epoxy Resin Stickers http://www.inecreative.com
- Sayhi0307 (China): Shipping Rates From China, Air Freight Rate From China, Ocean Freight Quote, Shipping Cost, Shipping Price, Freight Quote http://www.sztaizhou.com
 
 
 

Used Hartig Davis-standard Blow Molder 1994

Posted at: Offers to Sell and Export | Posted on: Tue 22 Jul, 2008 2:02 pm |
 
hartig davis blow molder 1994
Products Photos CatalogHartig Davis Blow Photos Catalog



Used Hartig Davis-standard Blow Molder 1994

Single 100-pound Accumulator Head!

Original Cost Was $1.4


Million Dollars!

Priced To Sell! Significant Savings!

This Machine Will Not Last Long!

Loaded With Options!

* Model Mcp400, Mr4-6060100-60120

* Single 100 Pound Accumulator Head

* Extra Large 60 X 120 Inch Clear Platen

* Automatic Part Take-out System

* 60-inch Max Mold Width

* 120-inch Maximum Mold Length

* 100-inch Maximum Clamp Open Daylight

* 30-inch Minimum Clamp Closed Daylight

* 70-inch Clamp Stroke

* 300 Tons Clamp Pressure

* Motorized Rollaway Press Section

* Dual 6 Inch 24:1 Extruders

* Dual 300hp Dc Extruder Drives

* 28-inch Maximum Tooling Diameter

* 12 Pounds Per Second Maximum Material Drop Rate

* Barber Coleman Maco 8000 Microprocessor Controls

Component Specifications:

Extruders - Two 6 Inch Diameter, 24:1 L/d High Torque Extruder Sections

* Grooved Feedthroat Section On Both Extruders For Improved Plasticizing Capabilities

* The Feed Screw Is Hartig's Mc4 Barrier Screw, Designed For Versatility In Blow Molding. It Is Machined From Sae 4140 Steel With The Main Flights Hard Surfaced With Stellite Or Equivalent Fpr Exceptional Wear Resistance. Hartig's Mc4 Consistently Outperforms Competitive Feedscrews By Delivering Higher Outputs At Lower Melt Temperatures. Lower Melt Temperatures Translate To Faster Cycles And High Productivity.

* The Extruder Drive Is A Highly Regulated 300 Hp D.c. Scr Package With

A 1150 Rpm Motor Which Provides Constant Torque To The Feed Screw.

Included In The System Is An Open Drip-proof Motor, Cooling Blowers And Intake Filters. All Drive Controls Are Conveniently Mounted In The Main Blow Molder Control Panel. The Drive Operates Under 460 Volt, 3 Phase, 60 Cycle Current.

* The Gear Reducer Used On The Hartig High Torque Extruder Is A Fixed Ratio Design Dh-300-911 For Compactness And Ease Of Maintenance. It Is Rated At 393 Hp At 70 Rpm With A 1.3 Service Factor For Extended Life.

* The Thrust Bearing Used To Absorb The Thrust Load Generated By The Feed Screw Is A High Quality Timken T-911 With A B-10 Life Of 177,800 Hours At 5,000 Psi And 100 Rpm.

* Our Tangential Opening Feedthroat Is A Proven Design Supplied On All

Hartig Extruders. It Is Designed To Assure Positive Feeding Of Virgin And Virgin/regrind Blends And Is Machined Of High Strength Ductile Iron. It's Construction Provides A Core For Water Cooling.

* Attached To The Feedthroat Is A High Flow Hopper System Engineered For Bridge-free Operation. Each Hopper Has An Integral Shutoff Slide Gate; Dump Chute For Quick Material Change, And A Sight Glass For Visual Level Indication.

* The Extruder Barrel Is Fabricated From Sae 4140 Steel With A Xaloy Liner Matched To The Hartig Feedscrew For Extended Production. All Barrels Are Pressure Rated 10,000 Psi. To Provide A Higher Degree Of Safety, A Safety Rupture Disk Is Installed At The Discharge End Of All Hartig Extruders.

* Extruder Temperature Control Is Provided Over The Entire Length Of The Barrel. The Extruder Is Divided Into Four (5) Zones Of Cast Aluminum Heaters With Cooling Coils. Each Zone Is Supplied With A Manual Needle Valve And Solenoid Valve With Closed Loop Water Recirculator For Automatic Cooling. The Barrel And Heaters Are Covered With Insulated Guards.

* Each Extruder Is Capable Of Running Independent Of The Other.

Accumulator Head - 100 Pounds Hdpe

* The Patented Hartig Dual Overlapping Layer Parison's Accumulator Head's Unique Design Produces A Parison Void Of A Continuous Knitline Through Its Wall.

This Allows The Utmost In Structural Integrity While Producing A Very Uniform Wall Thickness. As A Direct Result, Finished Products Can Usually Be Light Weighted For A Significant Material Savings.

* Hartig's Tandem Hydraulic System Assures A Uniformed Alignment Of The Ram And Tooling Forces For Long, Trouble Free Operation. Through The Use Of This System, The Inner Cylinder Strokes The Tooling While The Annular Outer Cylinder Strokes The Ram.

* Shot Size 100 Pounds Hdpe

* Drop Rate Maximum 12 Pounds/second

* Ram Stroke 10 Inches

* Tooling Cylinder Stroke 2 Inches

* Tooling Diameter (minimum) 12 Inches

* Tooling Diameter (maximum) 28 Inches

* Total Heater Kw 160 Kw

Press - 60 Inches Wide X 120 Inches High Clamping Section (m.c.p.)

* Hartig's Press Designs Are Based On The Unique Principal Of Pulling

The Molds Closed To Achieve Full Clamp Tonnage. This Concept Allows

All Custom Hartig Presses To Bring The Mold Faces In Parallel, As The

End Frames Have No Load On Them.

* The Platens Are Closed In High Speed With Individual, Small Bore Cylinders To Minimize Oil Flow For Maximum Efficiency. High Pressure Clamping Is Accomplished By Rotating Knuckle Clamps Which, When Engaged,

Pull The Molds Closed. These Short Strokes, Large Bore Cylinders Generate High Tonnage, But With Little Oil Flow. This Method Assures No Deflection Of The End Frames And No Axial Stressing Of The Tie Bars.

* Further, Hartig's Mcp Has Platens Which Ride On Ways. This Takes The Dead Platen And Mold Weight Off The Tie Rods To Further Assure No Deflection Takes Place To Disturb Parallelism.

* To Bring The Platens Together On Center Repeatedly, Dual Chain Synchronization Is Applied. Mounted Out Of The Press Working Area, The Adjustable Chain Systems Are Located On The Front And Back Of The Platens So That Forces Are Distributed Equally. Easy Adjustment Can Be Made For Off Center Close Or Adjustment.

* Also, Standard On All Presses Is A Safety System Of Electrical And Hydraulic Interlocks As Well As Whiskers To Sense If An Operator Is In The Press Area. Emergency Stops Are Located At Five Points Around The Machine And The Entire Press Area Is Enclosed By Expanded Metal. This Assures That All Pinch Points Are Guarded For Safe Operation.

Additional Press Specifications:

* Clamp Tonnage: 300 Tons

* Maximum Platen Opening: 100 Inches

* Minimum Platen Opening: 30 Inches

* Motorized Vertical Height Adjustment: +/- 5 Inches

* Side To Side Adjustment +/- 1.5 Inches

* Motorized Press Shut Height Adjustment

* Automatic Press Gate Opening And Closing

* Press On Wheels On Track

* Roll Out Track To Be Split For Removal

* Press Rolls Out To The Right

* 3 Tie Rod Press Design

Controls:

* The Control Panel Is A Three-door Nema Enclosure With Main Power

Disconnect Shock Mounted On The Unitized Base Wired 460 Volts/ 3 Phase/

60 Hertz. The Following Components Are Included:

* Barber-coleman Maco 8000 Microprocessor Control System With Lumitech

Display Panel For Control Of The Following Functions:

Control Temperature On All Zones Displayed Via Operator's Station.

The System Provides Independent Zone Temperature Control And Can Be

Independently Tuned.

Total Machine Sequential Control Up To 100 Independent Timer

Functions Available Depending On Number Of Sequence Modules In System.

Solid State Cartridges For Program And Control Parameter Storage.

Parison Process Control With Individual Weight And Die Gap Settings

And Graphic Display Of Profile Setpoints.

The Exclusive Use Of Individual Control Modules Allows Initial

System To Be Easily Expanded To Meet Future Requirements.

Sequence Control Is Accomplished By The Use Of An Ibm Or Ibm Compatible

Personal Computer Using Industry Standard Jic Graphic Symbols.

* D.c. Drive Controls

Amp Meter

Tachometer

Variable Speed Control

* Motor Starters For All Hydraulic Ac Motors

* Mercury Contactors On Heat Zones

* Fuse Block And Fuses

* Control Transformer

* A Portable Machine Operator's Station Is Included

Hydraulics

* The Hartig Hydraulic Power System Was Designed And Developed To Work Efficiently To Operate The Press, Accumulator Head(s) And Auxiliary Functions.

* The Power Unit Is A Bladder Accumulator Based System, Which Is Charged By A Pressure Compensated Pump. A Gear Pump Is Piggybacked To The Main Pump With Oil. The Filter Has A Bypass Alarm And The Tank Is Equipped With Low Level And High Temperature Alarms. Additionally, A Shell And Tube Heat Exchanger Is Outfitted With A Cooling Valve That Is Controlled Through The Maco 8000.

* Valving Is Cartridge Type For The Highest Oil Flow And Fastest Response Of Any Valve Design Available Today. Due To The Cartridge Valve's Design, The Wear Characteristics Are Far Superior To That Of Spool Valves. All Valves Are Manifold Mounted And Utilize Electrical Connectors With Integral Led's And Surge Suppressors.

* Press And Ram Speed Are Independently Proportionally Variable Through The Maco 8000 For Tight Process Control And Shock-free Performance.

* The Power Unit Is Floor Mounted With Integral Drip Pan, Sight Level Gauge, Pressure Gauges, And For Ease Of Maintenance, All Port And Valve Designations Are Stamped On The Manifold.

* Ac Horsepower 75

* Main Pump Gpm 47

* Accumulator Size 60 Gallons

* Reservoir Capacity 300 Gallons

* System Filtration 5 Micron

Pneumatics

* Includes Required Regulators, Filter And Valving For Air Blow And Pre-blow.

Base

* Main Base Is A Unitized Construction And Serves As A Mounting Platform For Extruder And Accumulator Head. An Access Catwalk Are Provided For Aintenance And Set-up Of Extruder And Accumulator Head.

Additional Features

* Auto Lubrication, Press Bushings

* 8 Station Auxiliary Hydraulic Manifold

* 4 Station Auxiliary Pneumatic Manifold

* Four 8 Station Mold Cooling Water Manifolds, 16 Zones In, 16 Zones Out

* Prepinch Assembly

* Retractable Top Blow Pin Assembly

* High And Low Blow To Be Included In Sequence

* Regular Blow And Pre-blow

* Florescent Lights In Press Area And Over Hydraulics

* Air Conditioner In Control Panel

* Dual Probe Melt Pressure Controller For Each Extruder

* Noise Level At Operator Station Did Not Exceed 80 Db At Time Of Original Machine Shipment

* Isolation Transformers On Each Extruder

Sale Terms:

Machines Are Sold On 'as Is Where Is' Basis. It Is The Responsibility Of The Purchaser To Ensure The Machine Is Fit For Purpose.

Machines Advertised May Be Withdrawn From Sale At Any Time Without Notice Or Reason.

Price Upon Request

Pictures Upon Request

Subject To Prior Sale

The Above Information Is Correct To The Best Of Our Knowledge, But We Cannot Be Held Responsible For Any Errors Or Ommissions.

For Further Information I Am Gladly At Your Disposal.

Regards,

Sidra (miss)

Email: Sidracomm@gmail.com



Company Contact:

No member photo
Contact Name: Sidra (Miss)
Company Name: Sidra Commercial Trading Company
Email: Email
Tel: 92-0300-4705383
Fax: 92-42-6558083
Street Address: P.O.BOX 2504,
G.P.O., Lahore - 54000, Pakistan
Member name: Sidracommercialtradingcom
Country: Pakistan-PK Pakistan
Member Since: 26 October 2007
Total Leads: 801 Sidracommercialtradingcom Import Export Business Leads
Business focus: Portland Cement, Sugar, Urea, Scrap, Used Power Plants, Used Generators, Used Machine Tools, Used Processing Plants, Used Plastic Machinery
Chat:
Verify: Safe Import Export Tips
 
 
 

Similar LeadsSimilar Suppliers And Manufacturers Import Export Trade Leads

  • French Baguettes Molder French Baguettes Molder - By karidamaisheng - On Wed 15 Jul, 2009 7:09 am: molder • maisheng’s french baguettes moulder is a flexible molder for production of french baguettes and other long breads in the medium-sized and sm....

  • Chinese Injection Molder In Shenzhen Chinese Injection Molder In Shenzhen - By wishmold - On Sat 14 Mar, 2009 1:18 am: chinese injection molder in shenzhen mold making mold design injection molding amp amp production precision mold plastic mold injection mold plastic injection mold die casting ....oit

  • Precision Machining Injection Mold Components China Molder Precision Machining Injection Mold Components China Molder - By wishmold - On Fri 12 Apr, 2013 1:03 am: precision machining injection mold components china molder wish mold is a professional mold manufacturer tooling maker in shenzhen china which specializes in design engineering mold making plastic injection....oit

  • Bmw 1994-2004 Key Programmer Bmw 1994-2004 Key Programmer - By kk521 - On Wed 01 Jul, 2009 2:52 am: bmw 1994-2004 key programmer key programming device and software for vehicles equiped with ews module coverage bmw 1994-2004 that have ews module including ews2 ews3 and ews4 ....oit

  • No product photos were provided Wupa Autoplaten Year 1994 - By Sharmafields - On Wed 08 Dec, 2010 6:01 pm: wupa autoplaten year 1994 dear sir or madam we can offer subject to prior sale and subject to our standard conditions of sale and delivery following machine r25375 08v ....oit

  • No product photos were provided Heidelberg Sm 102 Zp, Age C.1994, Special Offer - By Sharmafields - On Wed 24 Feb, 2010 6:22 pm: heidelberg sm 102 zp age c 1994 special offer we are pleased to offer you the following machine subject to prior sale heidelberg sm 102 zp age 1993 impr 35 mil ca ref wmi 1022 speci....oit

  • Komatsu Excavator Pc 710-5 Yr 1994 For Sale Komatsu Excavator Pc 710-5 Yr 1994 For Sale - By iramarete - On Thu 22 Oct, 2009 8:36 am: komatsu excavator pc 710-5 yr 1994 for sale we have following information of komatsu excavator for you the model no is pc710-5 the year of this machine is 1994 the hour meter is s....oit

  • Used Husky Lx 300 / 340 P100 / 120 E100 1994 Used Husky Lx 300 / 340 P100 / 120 E100 1994 - By Sidracommercialtradingcom - On Mon 13 Apr, 2009 12:43 pm: 1994 48 cavity preform injection molding systems technical specifications cavities 48 clamp force 300 ton voltage frequency phase 400 ....

 
 
 
TradersCity Free Import Export Trade Leads B2B Board  Offers to Sell and Export
 
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely