Used paper machine 1320 mm
Fully overhauled and many improvements made in 2004. The drive is on the
right from the flowbox, making plain woves, watermarks, felt finished, minimum 70 gsm and maximum 400 gsm, speed up to 100 m/min and capacity up to 20 TPD.
Stainless steel Esher Wyess pulper, batch operation, volume 12 m³, running at 6% consistency. Water tank stainless steel volume 16 m³. Stock chest stainless steel number one running at 3% consistency, volume 16 m³ with side entry agitator. Stainless portable high pressure pump. Dye system with tanks and pumps. Stock chest stainless steel number two handling chest, volume 22 m³ with side entry agitator. Two machine chests stainless steel each 500 kgs capacity. Side entry agitator. Broke deflaker is a Voith model 1E . Pre - cleaning of broke is by a Hett Separator model 475 with rejects to a Hett model 900 vibrating screen. Backwater fibre recovery by a Vickery Hydrasieve, stainless steel. Refining is by Beloit 16” DD refiner and the trim refiner is a JCOO. Machine screen is a Beloit Bird model 6 pressure screen with perforated baskets with 0.062” holes. V. Belt drive. L.D cleaners: three stage with fibre saver, stainless steel bodies with polyethylene nozzles.
Pressure flowbox by Holders, ten slice adjusters, slice width 1510mm, knock down wire frame with new stainless table, stainless frame, foil forming board with polyethylene tops, four stainless foil units Johnson, two of the foil units are vacuum assisted and are complete with silencers, total of 5 suction boxes, dandy support extended to take larger width dandies, plain couch and Thune automatic wire guide. Sheet transfer is by a Baggley box. Breast roll to couch centres: 10m. Wire width 1600mm, wire length 18.8 m.
Two presses with pneumatic loading, face 1540mm, roll diameters 410mm. First dryer Section
Total of nine dryers, face width 1530mm including rope rings, diameter 1220mm, operating pressure 20psi, rope feed, brass bearings, manual lubrication, bolted cylinder ends and Thune automatic guides. Dryers are open gear drive.
Inclined size press, pneumatic loaded, roll face width 1430mm and diameter 410mm. Screen with pumps and tanks at rear of machine.
Second dryer section . Four drying cylinders as first section.
Calender . Two roll calender with a single bottom Kuster roll, A/F bearings, hydraulic loaded, roll and face 1500mm.
Colour head for colour measurement.
Lippke head measuring basis weight, moisture and ash.
Colour head and associated controls.
Tusa tape paper transfer system on to drum reel.
Voith horizontal reel up with pneumatic operation. Maximum roll diameter 1500mm
Machine drive is sectional electric Eurotherm manufacture, installed 1999.
Vacuum system comprises two Nash CL401, Saffem 701 and a Drysdale 3VA. All pumps complete with separator and silencer.
28 Dandies and 2 sleeves. In basement of broke pulpers, 27 Dandies
Machines are sold on 'as is where is' basis. It is the responsibility of the purchaser to ensure the machine is fit for purpose.
Machines advertised may be withdrawn from sale at any time without notice or reason.
Price upon request
Pictures upon request
Subject to prior sale
The above information is correct to the best of our knowledge, but we cannot be held responsible for any errors or ommissions.
For further information I am gladly at your disposal.
Regards, Sidra (Miss)
Sidra commercial trading company, P.o.box 2504, (gpo)., Lahore- 54000
Islamic republic of pakistan
Contact Name: Sidra (Miss)
Company Name: Sidra Commercial Trading Company
Street Address: P.O.BOX 2504,
G.P.O., Lahore - 54000, Pakistan
Member name: Sidracommercialtradingcom
Member Since: 26 October 2007
Total Leads: 801 Sidracommercialtradingcom Import Export Business Leads
Business focus: Portland Cement, Sugar, Urea, Scrap, Used Power Plants, Used Generators, Used Machine Tools, Used Processing Plants, Used Plastic Machinery
Verify: Safe Import Export Tips