Used Waterbury Farrel No Zr23 19, 19 Inch 480mm , Sendzimir Reversing Mill

Our Offer Number: Sidra-10543-waterbury

Used Waterbury Farrel No: Zr23-19, 19" (480mm), Sendzimir Reversing Mill

Machine #10543

Specifications:

Manufacturer:
Waterbury Farrel Corporation
Model No.: Zr23-19
Type:
20-hi Cold Reversing Sendzimir Mill
Previous Use:
Brass
Maximum Incoming Thickness: .120" (3mm)
Minimum Finish Thickness: .003" (.076mm)
Maximum Strip Width: 19" (482mm)
Rolling Speed: 0 - 1000 Fpm (0 - 305m/min.)
Automatic Gauge Control (agc): Mass Flow
Hydraulic Screwdowns

Line Consists Of:

Payoff:
Type:
Expanding Mandrel
Type Of Expansion:
Hydraulic
I.d. Range:
16"/18" (406/457mm)
22" (56mm) With Expansion Plates
Width Of Payoff:
23" (58mm) Paper Unwinder
Coil Car
Payoff Drive:
3 Hp, 750 Rpm, 3 Ph., 60 Hz
Coil Snubber Holddown:
Hydraulic Back Tension

Leveler:
Type: Roller Leveler
Roll Size: 6" (152mm) Dia. X 21" (533mm) Width
3 Hp, 230/460 Volts, 1115 Rpm,
9.8/4.9 Amps, 3 Ph., 60 Hz. Into
Falk Gearbox W/32.04 To 1 Ratio

Entry Billy Roll:
With Speed Counter
Entry And Exit Wipers

Roll Coolant Spray System

Note:
Tank Is Not Salvageable - Must Be Replaced By Purchaser

Edge Guides:
Manual And Automatic
Pressure Boards And Wipers

Thickness Gauges:
Manufacturer: Vollmer
Model No.: Vmf 3/22
Quantity: 2 - One On Each Side Of The Mill.

Hydraulic Screwdowns

Main Mill Drive:
250 Hp, 650/1850 Rpm, 500 Volts, 400 Amps,
G.e. D.c. S/n Bd-2-80, Model 5cd25d26c506223

Winders:
Type: Expanding Mandrel
Type Of Expansion: Manual
Drum Size: 20" (508mm) Dia. X 22" (558mm) Width
Max. Coil O.d. 46.5" (1180mm)
Max. Coil Weight 8,000 Lbs (3,630 Kgs)
Winder Drives: 250 Hp, 650/1465 Rpm, 500 Volt,
400 Amps, D.c. Into Farrel Gearbox
Model Fs18, Ratio 7.61/1

Coil Spoolers:
60 Hp, 500 Volts, 98 Amps, 650/2100 Rpm
Into A D.o. James Gearbox W/14 To 1 Ratio,
New 1996, S/n 259215

Recoiler:
15"/16" I.d. X 21" Wide
Hydraulic Pushoff Coil Car
Recoiler Drive: 25 Hp, 240 Volts, 650/2000 Rpm,
86 Amps, G.e. D.c.

Electrical Controls:
G.e. Fanuc Scr Thyristor Controls On Payoff And Rewinder
Motor Generator On All Other Components

Date Mill Ceased Operation 2007
Mill Installed And Fully Operational

**price Quoted Is Ex Works As Is Where Is Subject To Prior Sale**

**all Specifications Are Subject To Verification By Purchaser**


Price Upon Request
Pictures Upon Request
Subject To Prior Sale

The Above Information Is Correct To The Best Of Our Knowledge,
But We Cannot Be Held Responsible For Any Errors Or Ommissions.


For Further Information I Am Gladly At Your Disposal.

Regards,

Sidra (miss)

Sidra Commercial Trading Company,
P.o.box 2504, (gpo).,
Lahore- 54000
Islamic Republic Of Pakistan
Voice: 92-0300-4705383
Email: Sidraco@gmail.com

_________________
Contact Name: Sidra Commercial Trading Company
Company Name: SIDRA (MISS)
Email: Sidracomm@gmail.com
Tel: 92-300-4705383
Fax: 92-42-6558083
Street Address: P.O.BOX 2504,
G.P.O., Lahore - 54000, Pakistan