|
|
|
|
|
|
| |
Used Witzig And Frank Multi Sided Machining Center
Posted at: TradersCity --> Offers to Sell and Export
Posted on: Thu 22 Nov, 2007 8:53 am
USED WITZIG & FRANK MULTI-SIDED MACHINING CENTER
DETAILS
OFFER NO: 1004-07460 - WITZIG
Machine type: MULTI-SIDED MACHINING CENTER
Make WITZIG & FRANK
Type TURMAT 58/181-R 5
Newin 1987
Control CNC
Location DÜSSELDORF HALLE 2
Country of origin GERMANY
Term of delivery SOFORT
Quotation EX STOCK DUESSELDORF, LOADED F
PRICE 56000.00 EUR
TECHNICAL DETAILS
Diameter 32 mm
Stations 8
Power capacity 110 kW
Weight of the machine ca. 26 t
Dimensions of the machine ca. 9,1 x 7,7 x 4,5 m
OTHER INFORMATION:
MACHINE CONSTRUCTION:self-carrying construction of machine top unit, which is used for mounting of all, machining units, the indexing drum and absorbing of the machining energyThe strong machine base carries the top unit, however without absorbing machining forces. The index drum RTHV 800-240 with HIRTH-spur gear is of large dimension. The drum indexing is done hydraulically with double-swivel drive resp. oil motor, free of backlash, indexing precision +/- 0,01 mm, indexing time approx. 3,5 sec.Drum clamping during the machining. Double indexing possible.At present the machine is equipped/tooled up for the machining of small eccentric shafts with a length of approx. 225 mmChucking diameter 22,5/ 32,5 mmcycle time realized approx. 1 min.The machine is equipped with an automatic loading and off-loading attachment FELSOMAT. The machine has worked on a VW-drive shaft-no. 030 145424/G 40 resp. no. 030 145434/G 60.The loading/offloading unit consists of:-feeding conveyor-delivery conveyor-linear unit-swiveling unit-short stroke slide-parallel gripper tong-swivel moduleclamping stroke of gripper tong approx. 5 mmradial stroke of gripper unit for pick-up resp. off-loading of work piece and/or loading of work piece into the chucksapprox. 250 mmFor pick-up of the work pieces, the index drum is equipped with hydraulic operated 2-jaw-chucks make RÖHM No. OW-414029.Chuck-diameter 300 mmpiston stroke 58 mmstroke per jaw 33,5 mmoperating pressure 40 bartotal clamping force 2800 DaNwork pieces are automatically loaded into the chucks through the gripper system. The work pieces are clamped in vertical position.The various machining stations are equipped with different machining units on different positions.Position 1 : vertical machining unit, operating from top to bottomPosition 2 : radial unit, 90 degree angle positionPosition 3 : vertical machining unit, operating from bottom to topThe position and kind of available machining unit can be seen from the enclosed arrangement drawing.The various units are suitable for:-turning and drilling operation-deep hole drilling operation-thread cutting operation-CNC turning operationMachining unit PEHT 60/140: Station 1.1, 1.3, 8.1 and 8.3Station 1.1 and 8.1 with additional centrifugal ring, 1.3, 8.1 and 8.3 additional with labyrinth ventilation, spindle sealing.Station 8.3 with centrifugal ring, adapter for center and center make RÖHM.spindle speeds approx. 700 - 2000 rpmdrive capacity approx. 4 kWStation 1.1 and 1.3 additional with tool breakage control.Turning and drilling unit PEHT 80/180 on station 2.1 and 2.3pick-up-diameter of adjustable sleeve 36 mmwork stroke 180 mmspindle speeds upto max. 3200 rpmdrive capacity 4 kWUnits equipped with internal coolant supply, centrifugal ring and station 2.1 additional with intermediate stop.Quill unit PEMT 25/180 MC - station 2.2 and 3.2:with CNC control SIEMENS 810With these units, drilling; reaming and sinking operations are possible. They can also be equipped with multi-spindle drilling heads for increasing the range of operations.Turning spindle is running in roller bearings.Together with the quill, the spindle is hydraulic controlled through an external feeding cylinder with adjustable stop. The feeding speed is inf. variable. For the travel limited electrical control of the PEHT unit , a wedge with several control cams is mounted at 1 side of the drive housing.The units are equipped with tool breakage control.Stroke of the NC slide 200 mmdrive capacity station 2.2 1,1 kWspeed range approx. 800 - 2000 rpmstation 3.2 1,5 kWspeed range approx. 1100 - 6300 rpmDeep hole drilling unit TPEH 45/200 - station 3.1 and 4.1:equipped with centrifugal ring, tool breakage control, coolant supply, cam control. max. drilling capacity into steel 30 mmwork stroke 200 mmspeed range approx. 1400 - 8000 mmfeeding force 10000 N at 30 barfeed rates 50 - 400 mm/min.rapid traverse and reverse speed 6 m/min.drive capacity 7,5 kWQuill unit PEHT 25/200 - station 3.3 and 5.2:units with cam control, labyrinth ventilation, limit stop, centrifugal ring only station 3.3, tool breakage controlwork stroke 200 mmpick-up diameter of adjustment sleeve 28 mmdrive capacity station 3.3 1,5 kWstation 5.2 1,1 kWstation 3.3 with direct drivestation 5.2 with belt drive and NC slide .Quill unit PEHT 25/200 station 5.1:with cam control, mounted cylinder, centrifugal ring, limit stop, locking device.work stroke 200 mmdrive capacity 1,5 kWStation 4.2:sealing attachment, adjusting attachment, tool breakage controlThread cutting unit GET 60/140 - station 4.3:with cam control, belt drive, guide rod for thread 1,5 mm right.spindle taper ISO 50stroke 140 mmTurning and drilling unit PEHT 100/180 - station 6.1,6.3 and 7.3:with housing, cylinder, quill, quill clamping, cam control6.3 additional with life center7.3 additional with labyrinth ventilation and centrifugal ring, RÖHM clamping cylinder RN-763, Heidenhain Rod 426Work stroke 180 mmstation 6.1 :with 3-jaw-chuck RÖHM diameter 160 mm, hydraulic clamping cylinderstation 7.3:with hydraulic clamping cylinder and power operated wedge chuck RÖHM No. 1 W-414030CNC cross slide with 6-fold turret head LARU, CNC control SIEMENS 810:station 6.2 - left-hand executionstation 7.2 - right-hand executionwork stroke x 160 mmwork stroke z 250 mmindex time for turret head for 60 degrees 1,5 sec.Turning and drilling unit PEHT 60/140 - station 7.1 and 8.2:with housing, quill, cam control - only station 7.1pick-up flange morse no. 4 RÖHM, life center MK 4 RÖHMonly station 8.2 - labyrinth ventilation, spindle sealing, centrifugal ringNC cross slide (SIEMENS 810):pick-up diameter of adjustment sleeve 36 mmwork stroke 140 mmspeed range 2000 - 6000 rpmdrive capacity 3 kWTotal power requirements of the machine 380 volt, 50 cycle approx. 110 kW
ORIGINAL PURCHASE PRICE IN 1987: DM 2.600.000,--
_________________
Contact Name: Sidra Commercial Trading Company
Company Name: SIDRA (MISS)
Email: Sidracomm@gmail.com
Tel: 92-300-4705383
Fax: 92-42-6558083
Street Address: P.O.BOX 2504,
G.P.O., Lahore - 54000, Pakistan
|
Posted By Sidracommercialtradingcom
Country:  Pakistan
Member Since: 26 October 2007
Total Leads: 573
Business focus: Portland Cement, Sugar, Urea, Scrap, Used Power Plants, Used Generators, Used Machine Tools, Used Processing Plants, Used Plastic Machinery
 
|
|
|
|
|
|
|
|
|
Similar Leads ( witzig frank multi sided machining )
| Import Export Lead |
Posted By |
Posted |
Preview |
|
Shenzhen Zhiboxin Printed |
Wed 07 Nov, 2007 8:57 am |
single sided pcb rohs and ul
capability
1 pcb scope heavy copper pcb hard gold pcb bridge connecting pcb blind amp amp buried via pcb lead free pcb halogen free pcb ....oit |
|
Shenzhen Zhiboxin Printed |
Wed 07 Nov, 2007 9:09 am |
double sided fr4 pcb rohs and ul
material fr-4 cem-1 2 3 94v0 94hb and so on
surface finish hal gold plating gold finger immersion silver immersion gold immersion tin os....oit |
|
Etlimited |
Wed 30 Jul, 2008 2:09 am |
single-sided-aluminum pcb
base material fr4 fr1 fr2 cem-1 cem-3
board thickness 0 30 to 3 20mm 12 to 26mil
copper thickness 0 50 to 5 ounce
solder mask lpi so....oit |
|
Beijing Huaxia Yongle |
Wed 19 Mar, 2008 4:43 am |
sided tape for holding and jointing of light weight goods in office and house application
high adhesion double sided tape suitable for sticking of .... |
|
Shanghai Hengqiang Corp |
Fri 16 May, 2008 2:53 am |
2-sided lint brush
2-sided lint brush clothes brush
this brush is 2-sided which ensures longer brush life twice the capacity of one-sided brushes plus convenient l....oit |
|
Leon85113 |
Thu 07 Aug, 2008 2:23 am |
sided adhesive tape mainly used for nameplate membrane switch shoe and leather industry foam industry postal service decoration label electron.... |
|
zhongchang |
Sat 16 Jun, 2007 2:17 am |
offer fi-1 clear sided atx computer case
high quality and excellent design
1 case dimensions 527 x 197 x 439mm
2 material of case electrolytic zinc coated steel
3 front usb support
....oit |
|
Beater |
Fri 30 Nov, 2007 12:54 am |
machining parts
we specialize in manufacturing and processing various precision non-standard parts turned parts connectors fasteners stamped punched parts hardwar....oit |
|
Richmachine |
Mon 16 Jun, 2008 1:57 pm |
4 color one sided continuous bill form printing machine
the rchm470pj-z is a combined 4 color printing press equipped with the computer bill amp amp form
punching and folding machine series to accompl....oit |
|
Witgaintechnologylimited |
Mon 12 Nov, 2007 8:00 am |
provide double sided and multilayer pcb printed circuit boards
we are an iso9001 2000 and ul certified oem manufacturer specializing in high-quality pcbs since 1994 our capabilities cover
- rigid printed ci....oit |
|
|
|
|
Free Magazine Subscription
|
|
|
|
|
|
13 visitors now from 
USA 
Jamaica 
UK 
Germany 
Philippines 
France
