The Burglar alarm system G10E/EA adopts SMS data transmission and voice platform of GSM
network to send control command and receive alarm remotely. The system can be set delayed-arm. When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials its pre-set telephone/mobile phone numbers automatically and drive wiretap. In addition, users can dial the system and set it in arm/disarm mode by any phones.
support wired and wireless detectors
- Adapt wavecom double frequency GSM module.
- 9 wireless guarding zones
( 1 SOS alarm zone, 1 fire alarm zone, 1 external power failure alarm zone, the other 6 wireless guarding zones can be defined by user)
2 hardwire guarding zones.
- Send SMS to 3 mobile phones automatically while alarming.
- Call 3 phones automatically while alarming and drive wiretap.
- Arm/disarm by wireless keyboard, remote controller, SMS or remote telephone/mobile phone.
- Set the host by wireless keyboard, SMS or remote phone.
- Report guarding zones remotely by SMS or voice.
- Modify the name of wireless guarding zones and inquire the status of host by SMS demand.
- With voice reminder while the host is working
- Support two-way communication can be used as handfree telephone.
- With standby rechargeable battery.
- The alarm host automatically stores system status, while its power is off.
- Connect with the alarm center through GSM network.
Standard Package Include
One Main unit
One Wireless PIR motion sensor
One Magnetic door/window contact
Two Remote controllers
One AC Adapter
Main Unit PARAMETER
- GSM network frequency: 850/1900MHZ or 900/1800MHZ
- External power failure alarm
Start-time: less than 1s
Alarm response time:
Less than 10s (GSM in normality)
- Power requirements: AC 220V 50Hz
- Standby battery: DC8.4V
- Standby battery working hours: more than 10 hours
- Working conditions
Operating temperature: -20 to 60℃
Humidity: 20% to 95%
- Wireless frequency: 315±0.2Mhz/433±0.2Mhz
- Coding type: Jumping code
- Remote controller: DC12V
- Indoor siren: DC12V
- Door/window magnetic contact: DC12V
- PIR sensor: 3V (two 1.5v batteries inside)
- Smoke detector: DC9v
- Gas detector: DC9V
- Shock sensor: DC12V (four 1.5v batteries inside)
- Emergency button: DC12V
Contact Name: Jackie Chow
Company Name: VSTAR International Ltd.
Street Address: No.203 Building,
Shatoujiao, Yantian District,
Member name: burglaralarmsystem
Member Since: 29 July 2009
Total Leads: 1751 burglaralarmsystem Import Export Business Leads
Business focus: Burglar Alarm System, Home Security Alarm System, Wireless Alarm System, Gsm Alarm System
Verify: Safe Import Export Tips
Product Category: Alarm systems