-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 33 visiting now from 11 USA 
11 Belgium 
5 India 
2 Philippines 
1 Germany 
1 Russia 
1 Singapore 
1 China
Hello visitor from
USA - 33 visiting now from 11 USA 11 Belgium 5 India 2 Philippines 1 Germany 1 Russia 1 Singapore 1 China
0-5v Control Signal Power Supply For 40watt 700 / 800 / 850mm Co2 Laser Tube On K40 Engraving Machin
Posted at: Offers to Sell and Export | Posted on: Saturday 27 December 2025 2:27 am | Poster last visit: Saturday 27 December 2025 |
Product Category: Main
» Industrial Manufacturing and Processing Machinery and Accessories
» Metal cutting machinery and accessories
» Specialized or miscellaneous metal cutting machines
» Metal engraving machine
» 0-5v Control Signal Power Supply For 40watt 700 / 800 / 850mm Co2 Laser Tube On K40 Engraving Machin
Product Description:
ZS-40WL CO2 laser power supply
Feature：
1. The green signal terminal laser power source has
feedback interface which can be used in closed-loop control and testing the working current of laser.
2.Because of many protect function, this green signal terminal laser power source dramatically lengthen the lifetime of glass type CO2 tube.
3. This silver color laser power source has fast response speed and effect.
4.Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power on this 40w laser power source.
5.This 40 watt CO2 power supply has an aluminum alloy outside shell and a dedicated interface for the stamp engraving machine: G/P/L/G/IN/5V. In addition, it also has; DC24V/5V output.WL means it has while color input signal terminal block.
6.Good compatibility: This 40w laser power source can be applicable to most brands of 30Watt, 40Watt, 50Watt CO2 laser tube made by different factories.
7. The silver color laser power source has open circuit protection: Under the condition of good protective earth, the 40watt laser power supply can work in open-circuit for a short time, which could avoid the damage to laser power supply.
8.Easy Control: The start and stop of Co2 laser power can be easily controlled by TTL level on this 40W laser power supply. And it has protection switch to test the external water, ventilation, etc.
9.The Co2 laser power source adds a new function, that is timely scene judging which part is damaged on laser tube or laser power supply.
10. It uses the latest silicon carbide to replaces traditional transistors. The silicom carbide has high efficiency, low heat generation and low failure rate characteristics.Which make laser power source more suitable for long-time uninterrupted works in hot environment.
11.The silicon carbide reduces circuit's quantity, which reduces failure rate and keep consistency in output parameters. Enable the CO2 laser PSU have better engraving and cutting effects
12. The 40W laser power supply adopts surface mount assembly process, which is fully automated and standardized It uses HD cameras to detect circuit boards, assembled components and soldering effects. The two methods reduces the possibility of human error causing unqualified CO2 power source
13. It adopts silicone tube to wrap output HV cable to prevent electric sparks from splashing and protect operators and equipment, which allowing this 40watt laser power source work normally in humid environments
14. 90-270V Voltage stabilizer is optional.
00 wire connection.jpg
Specification：
lnput
Input voltage
AC220Vą10% (AC110V specified while order)
AC frequency
47~440hz
Maximum input power
350w
Maximum input current
1.5a
Output
Maximum output voltage
25kv
Maximum output current
24mA
(depending on the laser tubes of different manufacturers)
Efficiency
More than 90% (Full load)
Response speed
Not more than 1ms
Control lnterace
TTL multilevel switching control, effective level can be high and low selection (see control wining diagram)
Insulation
lnput-output
AC 1500V 1 minutes not more than 10mA
lnput-shell
AC 1500V 1 minutes not more than10mA
Output-shell
Connection
Open Circuit Protection
Can be short circuit (requires a good grounding shell, while avoiding the positive electrode and the shell between the arc)
Environmental Requested
Working temperature
-10℃~50℃
Storage of temperature
-20℃~75℃
Relative Humidity
Maximum 85%RH (non-condensing)
Altitude
100, 000 feet of work
200, 000 feet of storage, dose not work
Cooling methods
Forced air cooling (fan cooling)
Dimensions (LxWxH)
142mmx145mmx60mm
Company Contact:
Contact Name: William
Company Name: Jinan Ruby Laser Technology Co., Ltd
Email:
Tel: 15253146378
Fax:
Street Address: 8510 Room, Huiju
Building, Western Second Ring Road
And Meili Road, Tianqiao District,
Jinan City
Jinan, Shandong 250032
China
Website: https://www.rlaserpowersupply.com/
Member name: LASERPOWERSOURCE
Country: China
Member Since: 20 December 2025
Total Leads: 16 LASERPOWERSOURCE Import Export Business Leads
Business focus: Co2 Laser Tube, Co2 Laser Power Supply, Yag Laser Power Supply, Rf Co2 Tube
Verify: Safe Import Export Tips
Feature：
1. The green signal terminal laser power source has
feedback interface which can be used in closed-loop control and testing the working current of laser.
2.Because of many protect function, this green signal terminal laser power source dramatically lengthen the lifetime of glass type CO2 tube.
3. This silver color laser power source has fast response speed and effect.
4.Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power on this 40w laser power source.
5.This 40 watt CO2 power supply has an aluminum alloy outside shell and a dedicated interface for the stamp engraving machine: G/P/L/G/IN/5V. In addition, it also has; DC24V/5V output.WL means it has while color input signal terminal block.
6.Good compatibility: This 40w laser power source can be applicable to most brands of 30Watt, 40Watt, 50Watt CO2 laser tube made by different factories.
7. The silver color laser power source has open circuit protection: Under the condition of good protective earth, the 40watt laser power supply can work in open-circuit for a short time, which could avoid the damage to laser power supply.
8.Easy Control: The start and stop of Co2 laser power can be easily controlled by TTL level on this 40W laser power supply. And it has protection switch to test the external water, ventilation, etc.
9.The Co2 laser power source adds a new function, that is timely scene judging which part is damaged on laser tube or laser power supply.
10. It uses the latest silicon carbide to replaces traditional transistors. The silicom carbide has high efficiency, low heat generation and low failure rate characteristics.Which make laser power source more suitable for long-time uninterrupted works in hot environment.
11.The silicon carbide reduces circuit's quantity, which reduces failure rate and keep consistency in output parameters. Enable the CO2 laser PSU have better engraving and cutting effects
12. The 40W laser power supply adopts surface mount assembly process, which is fully automated and standardized It uses HD cameras to detect circuit boards, assembled components and soldering effects. The two methods reduces the possibility of human error causing unqualified CO2 power source
13. It adopts silicone tube to wrap output HV cable to prevent electric sparks from splashing and protect operators and equipment, which allowing this 40watt laser power source work normally in humid environments
14. 90-270V Voltage stabilizer is optional.
00 wire connection.jpg
Specification：
lnput
Input voltage
AC220Vą10% (AC110V specified while order)
AC frequency
47~440hz
Maximum input power
350w
Maximum input current
1.5a
Output
Maximum output voltage
25kv
Maximum output current
24mA
(depending on the laser tubes of different manufacturers)
Efficiency
More than 90% (Full load)
Response speed
Not more than 1ms
Control lnterace
TTL multilevel switching control, effective level can be high and low selection (see control wining diagram)
Insulation
lnput-output
AC 1500V 1 minutes not more than 10mA
lnput-shell
AC 1500V 1 minutes not more than10mA
Output-shell
Connection
Open Circuit Protection
Can be short circuit (requires a good grounding shell, while avoiding the positive electrode and the shell between the arc)
Environmental Requested
Working temperature
-10℃~50℃
Storage of temperature
-20℃~75℃
Relative Humidity
Maximum 85%RH (non-condensing)
Altitude
100, 000 feet of work
200, 000 feet of storage, dose not work
Cooling methods
Forced air cooling (fan cooling)
Dimensions (LxWxH)
142mmx145mmx60mm
Company Contact:
Contact Name: William
Company Name: Jinan Ruby Laser Technology Co., Ltd
Email:
Tel: 15253146378
Fax:
Street Address: 8510 Room, Huiju
Building, Western Second Ring Road
And Meili Road, Tianqiao District,
Jinan City
Jinan, Shandong 250032
China
Website: https://www.rlaserpowersupply.com/
Member name: LASERPOWERSOURCE
Country:
ChinaMember Since: 20 December 2025
Total Leads: 16 LASERPOWERSOURCE Import Export Business Leads
Business focus: Co2 Laser Tube, Co2 Laser Power Supply, Yag Laser Power Supply, Rf Co2 Tube
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
40watt Carbon Dioxide Power Supply For 700 / 800 / 850mm Co2 Tubes On 3020 Laser Engraving Machine - By LASERPOWERSOURCE - On Monday 22 December 2025 9:41 am: 5v analog signal and pwm signal can be used to control laser power output
3 good compatibility this 40w co2 laser power supply is special designed f....
100watt Carbon Dioxide Laser Power Source For 145cm Co2 Tube For Cnc Engraving / Cutting Equipment - By LASERPOWERSOURCE - On Monday 22 December 2025 10:01 am: 00wx co2 laser power supply
feature amp #65306
1 input analog signal 0 5v or pwm is selected to control the output laser power on this 100w laser....
Ac110 / 220v 80w Laser Power Supply For 1450mm Co2 Tubes On Cutting / Engraving Machine - By LASERPOWERSOURCE - On Monday 22 December 2025 9:35 am: 0wx co2 laser power supply
feature amp #65306
1 each 80watt laser power supplies before selling will go through the aging check
1 sustain 10 h....
130w Laser Power Source For 1650mm Co2 Tube On 1325 Cnc Cutter - By LASERPOWERSOURCE - On Monday 22 December 2025 9:46 am: 5v as control signal output interface the high voltage co2 power supplies adopts steel outside shell
5 protection function this laser tube s co2 p....
Ac / Dc Input 300 Watt Laser Power Supply For Co2 Combing Beam Or Folded Tube - By LASERPOWERSOURCE - On Monday 22 December 2025 4:05 am: 5v analog signals or pwm signals for laser power control
3 300w laser power supply uses ordinary h l p g in 5v ports to receive control signals
4 ....
Ac220 / 110v Input 60w Power Supply For 1200-1250mm Co2 Laser Tube - By LASERPOWERSOURCE - On Saturday 27 December 2025 2:21 am: 0wx co2 laser power supply
feature
1 this zs-60w co2 laser power supply uses ordinary h l p g in 5v ports to accept laser power s control signal an....
Ac180-260 / Dc280-350v Input 150w Co2 Power Supply For Combing Bean Or Folded Tube For Laser Weeder - By LASERPOWERSOURCE - On Monday 22 December 2025 2:05 am: 5v analog signals or pwm signals to control the output power
11 it has good grounding protection which can provide very safe protection for operato....
150w Co2 Laser Power Supply For Co2 Cutting Machine Or Dirt Cleaning Machine For Textile - By LASERPOWERSOURCE - On Saturday 20 December 2025 4:00 am: 0w co2 laser power supply is specifically developed for removing residual and condensed dyes and oil stains on the inner surface of barrels in the tex.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- EDI-LED Electronics Co Ltd: Sunny Ye Of EDI-LED Electronics, A Manufacturer Of Led Lighting From China
- Guangzhou Kinggreat Trading Ltd: Emma Lee Of Guangzhou Kinggreat Trading An Electronic Products And Accessories Supplier From China
- Wavespectrum Laser Inc: Bruce Yu Of Wavespectrum Laser, A Manufacturer High Power Semiconductor Lasers From China
- Ever Tech Laser Technology: Edward Elric Of Ever Tech Laser Technology A Manufacturing Company For Laser Machinery From China
- Jinhua Sunrise Electronic Co Ltd: Andy Peng Of Jinhua Sunrise Electronic From China
Metal engraving machine Classification Navigation
Main - Industrial Manufacturing and Processing Machinery and Accessories - Metal cutting machinery and accessories - Specialized or miscellaneous metal cutting machines - Metal engraving machine [2]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely