-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 34 visiting from 21 USA 
7 Singapore 
2 UK 
2 Germany 
1 China 
1 France
Hello visitor from
USA - 34 visiting from 21 USA 7 Singapore 2 UK 2 Germany 1 China 1 France
12v Electric Impact Wrench Operating Manual
Posted at: Offers to Sell and Export | Posted on: Thursday 5 January 2012 7:53 am | Poster last visit: Thursday 19 May 2016 |
Product Category: Main
» Tools and General Machinery
» Hand tools
» Power tools
» Impact wrenches
» 12v Electric Impact Wrench Operating Manual
Product Description:
12V Electric Impact Wrench Operating Manual:
For your safety, please read this operating manual carefully
before operation
1. Operation Scope
1.1 The electric wrench is used for cars
1.2 Other nets is used for tight and loose
2. Operation Environment
The electric wrench is applied below 1000 meters above sea level and from -20℃ to +40℃ under natural temperature. It is prohibited to be operated in the circumstances of magnetic and explosive fields.
3. Warranty Period
1 year
4. Special Safety Rules
4.1 This electric wrench can only be used in 12V DC cigarette lighter socket in cars
4.2 Start the engine before operation of the electric wrench, keep the engine running while running
4.3 Don’t use this electric wrench continuously for more than 10 minutes
4.4 When loosening wheel nuts, ensure the correct socket is attached onto the electric wrench head
4.5 Don’t touch the electric wrench head during operation
4.6 Don’t over tighten wheel nuts
4.7 Don’t fit any other socket that has not been supplied with this electric wrench
4.8 Never leave the electric wrench unattended while connected to the cigarette lighter plug
4.9 Always keep children away from the working area
5. Operation Instructions
Warning: please follow the operating manual strictly
5.1 Switch Operation
A. Use the on/off switch to switch on the electric wrench. To switch off, release the on/off switch
B. Switch the button to the “L” mark, then the electric wrench is in the “loose” position
C. Switch the button to the “T” mark, then the electric wrench is in the “tight” position
D. In normal use, the impact frequency for tightening shall not be more than 6 times
5.2 Loose Wheel Nuts
A. Use your jack to lift up your car, ensure the wheel about 5 cm(2 inch) between the ground. Refer to your car operation manual for the exact height
B. Put cigarette lighter plug into cigarette lighter and start the engine
C. Choose one of the sockets to sure it applicable the screws, and put it to the electric wrench head
D. Then press the side of the switch (with “L” mark) to start
E. If nets rusted and add grease, if any needed
5.3 Tighten Wheel Nuts
A. Put wheel in position, screw on the nut by hand prior to tightening with the electric wrench. This avoid cross threading the nut
B. Press the side of the switch (with “T”) sto start, the nut will be tightened in a few seconds
C. The nut will be tight enough when 4~5 clicks are heard, Don’t over tighten
6. Maintenance
The electric wrench must be maintained and repaired by professionals according to the operating manual.
6.1 Keep it clean and dry after operation
6.2 Any change in the structure, which might affect its safety. Is probidden
7. Troubles Analysis
7.1 Troubles
The electric wrench does not work or can not start or stop when running
7.2 Causes
A. No electricity in the cigarette lighter
B. Fuse is broken
7.3 Solutions
A. Check if your vehicle requires “key on” position
B. Check it or insert the plug correctly
C. Check there is no foreign material inside the cigarette lighter socket. Only use non-conductive tools to remove it. Never use metal tools
D. Change a good 10A fuse
Company Contact:
Contact Name: Jack Kuang
Company Name: Nosen M&E Technology Co., Ltd
Email:
Tel: 86-769-85644651
Fax: 86-769-85644652
Street Address: Building F, Xinhaoyuan
Industrial Park, Xitou, Houjie, Dongguan,
Guangdong, China
Website: http://www.nosenjack.com
Member name: nosenkw
Country: China
Member Since: 26 May 2009
Total Leads: 519 nosenkw Import Export Business Leads
Business focus: Screw Jack, Bevel Gearbox, Screw Jack System
Chat:
Verify: Safe Import Export Tips
For your safety, please read this operating manual carefully
before operation
1. Operation Scope
1.1 The electric wrench is used for cars
1.2 Other nets is used for tight and loose
2. Operation Environment
The electric wrench is applied below 1000 meters above sea level and from -20℃ to +40℃ under natural temperature. It is prohibited to be operated in the circumstances of magnetic and explosive fields.
3. Warranty Period
1 year
4. Special Safety Rules
4.1 This electric wrench can only be used in 12V DC cigarette lighter socket in cars
4.2 Start the engine before operation of the electric wrench, keep the engine running while running
4.3 Don’t use this electric wrench continuously for more than 10 minutes
4.4 When loosening wheel nuts, ensure the correct socket is attached onto the electric wrench head
4.5 Don’t touch the electric wrench head during operation
4.6 Don’t over tighten wheel nuts
4.7 Don’t fit any other socket that has not been supplied with this electric wrench
4.8 Never leave the electric wrench unattended while connected to the cigarette lighter plug
4.9 Always keep children away from the working area
5. Operation Instructions
Warning: please follow the operating manual strictly
5.1 Switch Operation
A. Use the on/off switch to switch on the electric wrench. To switch off, release the on/off switch
B. Switch the button to the “L” mark, then the electric wrench is in the “loose” position
C. Switch the button to the “T” mark, then the electric wrench is in the “tight” position
D. In normal use, the impact frequency for tightening shall not be more than 6 times
5.2 Loose Wheel Nuts
A. Use your jack to lift up your car, ensure the wheel about 5 cm(2 inch) between the ground. Refer to your car operation manual for the exact height
B. Put cigarette lighter plug into cigarette lighter and start the engine
C. Choose one of the sockets to sure it applicable the screws, and put it to the electric wrench head
D. Then press the side of the switch (with “L” mark) to start
E. If nets rusted and add grease, if any needed
5.3 Tighten Wheel Nuts
A. Put wheel in position, screw on the nut by hand prior to tightening with the electric wrench. This avoid cross threading the nut
B. Press the side of the switch (with “T”) sto start, the nut will be tightened in a few seconds
C. The nut will be tight enough when 4~5 clicks are heard, Don’t over tighten
6. Maintenance
The electric wrench must be maintained and repaired by professionals according to the operating manual.
6.1 Keep it clean and dry after operation
6.2 Any change in the structure, which might affect its safety. Is probidden
7. Troubles Analysis
7.1 Troubles
The electric wrench does not work or can not start or stop when running
7.2 Causes
A. No electricity in the cigarette lighter
B. Fuse is broken
7.3 Solutions
A. Check if your vehicle requires “key on” position
B. Check it or insert the plug correctly
C. Check there is no foreign material inside the cigarette lighter socket. Only use non-conductive tools to remove it. Never use metal tools
D. Change a good 10A fuse
Company Contact:
Contact Name: Jack Kuang
Company Name: Nosen M&E Technology Co., Ltd
Email:
Tel: 86-769-85644651
Fax: 86-769-85644652
Street Address: Building F, Xinhaoyuan
Industrial Park, Xitou, Houjie, Dongguan,
Guangdong, China
Website: http://www.nosenjack.com
Member name: nosenkw
Country:
ChinaMember Since: 26 May 2009
Total Leads: 519 nosenkw Import Export Business Leads
Business focus: Screw Jack, Bevel Gearbox, Screw Jack System
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Deep Cycle Electric Vehicle Battery 12v 22ah Orema Battery Chinese Supplier - By OremaBattery - On Wednesday 27 December 2023 2:50 am: 12v 22ah battery is specifically designed for electric vehicles offering reliable and consistent power for your scooter engineered with advanced agm....
Neexgent Deep Cycle Lifepo4 Battery 12v 100ah And Lithium Ion Batteries 12v 200ah Li Ion For Solar R - By Neexgent - On Wednesday 24 August 2022 5:24 am: 12v 100ah lithium ion battery pack 12 8v
• 6000 cycles @80% dod effectively reducing total cost of ownership
• low maintenance battery good chemi....
Commercial Black Panther 800 Rippa Garden Electric Remote Control Robot Lawn Mower Electric - By Maxchris - On Friday 29 July 2022 2:57 am: electric remote control robot lawn mower electric start funyiro amp #65306
quick details
grade
slope mower
engine displacement
452cc
voltage ....
Ad3e301-02d03v / -w Eh Oil Hydraulic Unit Pressure Switch Inlet Outlet Strainer Oil Filter Wrench - By DongfangYoyik - On Thursday 14 July 2022 12:52 am: wrench for turbine generator parts
is to use the generator sets of professional power plant supporting model products yoyik main generator accessori....
China Manufacturer Supplier Ha102-600 Hydraulic Automatic Bollards Impact Tested - By cnzasp - On Thursday 28 July 2022 9:15 am: impact tested
amp #9679 dimension amp #966 400×1150mm
amp #9679 bollard diameter 217±1mm customized 271mm diameter
amp #9679 bollard thic....
Manual Swaging Machine - By juichihco - On Monday 4 March 2024 7:38 am: manual swaging solution crafted by jui chih machinery industrial co ltd designed for precision and efficiency our manual swaging system is tailor....
Stainless Steel Manual Banding Tools - By CrownWealth - On Friday 6 May 2022 6:11 am: manual banding tool is the spinner typed tensioner tool which is designed for tensioning stainless steel strapping around poles and piping it featur....
Slewing Drives With Extended Shafts And Handwheels That Require Manual Operation - By UniqueTransmission - On Friday 21 October 2022 4:26 am: manual operation matching connecting shafts and handwheels are used in the field of industrial automation why our customers still need manual operati.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Esperantop Holding Company Limited: William Of Esperantop Holding Producing High Volume Short Lead Time Consumer Goods From China
- Zhongshan Zhuoli Trading Co Ltd: William Lin Of Zhongshan Zhuoli Trading Sourcing Electronic Home Appliances From China
- Henan Huanyu Power Source Co Ltd Shenzhen Division: Tina Han Of Henan Huanyu Power Source Producing Battery Models From China
Impact wrenches Classification Navigation
Main - Tools and General Machinery - Hand tools - Power tools - Impact wrenches [9]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely