Thickness Of Plank Thickness of Wear layer Back Size of Plank UV Protected Colors
5mm 0.1-1.0mm +1.5mm
IXPE/EVA/Cork 6*36” YES Multi Option
0.1-1.0mm +1.5mm IXPE/EVA/Cork 6*48” YES Multi Option
0.1-1.0mm +1.5mm IXPE/EVA/Cork 7*48” YES Multi Option
0.1-1.0mm +1.5mm IXPE/EVA/Cork 9*48” YES Multi Option
0.1-1.0mm +1.5mm IXPE/EVA/Cork 12*24” YES Multi Option
RESIDENTIAL WARRANTY Lifetime Limited
COMMERCIAL WARRANTY 15 Years
●Place natural fiber rugs at entry points to help trap grit and absorb moisture that may damage the finish. This can protect the floors from dirt or wear.
●To prevent abrasive dirt and dust from accumulating and scratching the finish, vacuum, sweep or dust mop your floor once a week or more if needed. The vacuum head should be a brush or felt attachment. Do not use a vacuum with a beater bar head.
●We recommend Basic Coatings Squeaky Clean or Bona Hardwood Cleaner for regular cleaning and removing grease and smudges from your floor.
●Do not use harsh abrasive cleaners, bleach, ammonia or vinegar based cleaners, wax or acrylic polishes, or oil soaps. These may dull or damage the finish, leaving a greasy film and making the floor slippery and more difficult to clean.
●Protect your floor against direct sunlight or any intense source of artificial lighting. Over time, intense natural and artificial light may discolor the floors.
●Do not roll, or drag heavy objects across your floor. Do not wear shoes having heel taps, spikes, cleats, rocks, gravel or sharp objects protruding from the sole.
●Add felt pads to all furniture and chair legs to prevent damage to the floor. Replace the felt pads when dirty or worn. For extremely heavy objects, use wide, non staining rubber cups. Protective floor coverings for wheeled office furniture should be used.