5-20mm Hybrid material Heat Transfer Printing Felt Belt
Material Feature:Heat Resistant
Thickness:6mm, 8mm, 10mm
1. 100% nomex raw material
2. The max temperature resistant 280
3. Endless type - no joint(Don't worry about the fracture)
4. MisalignedOur base cloth is use endless industrial silk. Testing report showed the misaligned rate is about -+ 3mm. enclosed our base cloth for your consideration
5. ShrinkageThe base cloth can control the shrinkage rate in 2.5%--3%.
That kind of felt belt suitable for transfer printing machine, such as Italy Farah, Rafah, Mantian, Santex, Japan East Valley, Texas691.692, Haining Shrink Machine, Monti, Lemaire, Bater, Stork, Futanet, Gessner etc.
Direction of our felt belt
1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter to see if the perimeter is the same.
2. Adjust the machine pressure within 2kg. heat up to 150 ℃, idle for 2 hours; heat up to
170℃, idle for 2 hours; heat up to 190℃, idle 3 hours( important); heat up to 200℃, idle for 2 hours.
3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg according to your needed and start to printing.
Contact: Huatao Group Limited
Email: sandy (at) huataogroup.com
Web: 3W industrial-felts.com 3W aerogel-blanket.com
Contact Name: Sandy Qin
Company Name: Huatao Group Limited
Street Address: Zhonghua Street
Shijaizhuang, Hebei 050065
Member name: huataofelt
Member Since: 29 September 2019
Total Leads: 11 huataofelt Import Export Business Leads
Business focus: Aerogel Blanket, Industrial Felt, Thermal Insulation Materials
Verify: Safe Import Export Tips
Product Category: Felt fabrics