bopp colored tape wholesale Paste in the process because of the uneven pressure on bopp tape hand, if
the hand rolling bopp tape is easy to form small bubbles, and may damage the fine outlets. Available softer rubber roller bopp tape rolling uniform paste real. RCC is to approach from the middle to both sides; people & rdquo; track compaction fonts, so you can put bopp tape in the middle of the air squeezed out. Currently on the market there is one kind of barbed needle roller for exclusion of air bubbles is also very effective. 6. After the printing paste is good, and in order to avoid printing inks and cleaning solvents in contact bopp tape and plate edge adhesive, circle around the plate can be affixed Edge bopp tape, to avoid the phenomenon of Alice Edition. The thickness of the thin edge bopp tape as well. 7. unloading version, we recommend the plate of less than 90 & deg; angle (the angle between the tangent of the plate and remove the drum surface) slow and steady unloaded, to avoid media wrinkling or cracking. Unloading slower version of adhesion bopp tape media weaker, on the contrary, the sooner, the stronger the adhesive force. Unloading bopp tape, removable media with the same method. Flexographic printing process is a fine, many variables need to be controlled. As manufacturers of label printing quality requirements are high, the process every step of the printing control becomes more and more important, want to simply explore pasting bopp tape aspect of this article can give you help.