-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 64 visiting from 42 USA 
12 Canada 
6 Singapore 
2 China 
2 UK
Hello visitor from
USA - 64 visiting from 42 USA 12 Canada 6 Singapore 2 China 2 UK
- altinsoymarble (Turkey): Marble, Natural Stone, Travertine, Limestone, Emperador, Olive Maron, Bursa Beige, Uludag White,... http://www.altinsoy.com.tr
Copper Mould Tube
Posted at: Offers to Sell and Export | Posted on: Monday 11 May 2020 1:38 am | Poster last visit: Monday 11 May 2020 |
Product Category: Main
» Distribution and Conditioning Systems and Equipment and Components
» Tubes tubing and tube fittings
» Welded copper tubes
» Welded copper bent tube
» Copper Mould Tube
Product Description:
Copper Mould Tube & Plate
We specially in supplying Copper Mould Tube, Crystallizing equipment of
continuous casters, Mould cooling jacket, Repair of Metallurgical Copper Mould Tube, etc.
Equipments & Spare parts for Continuous Casting Machine.
1. Copper mould tube( square, rectangle and round )
2. Crystallizing equipment of continuous casters
3. Mould cooling jacket.
4. repair of copper tube moulds
Copper mould alloys
The copper alloys chosen for the moulds must maintain their physical properties at the operating temperatures of the continuous casting process.
The temperature gradation from the inner wall of the mould to the outside face of the mould can cause serious distortion problems, and Metallurgical Copper Mould Tube is imperative that the correct alloy is chosen for the various operating conditions.
Square Copper mould tube STANDARD MATERIALS
Phosphorus de-oxidised copper
This alloy has been proven to be excellent for the manufacture of moulds in the continuous casting of billets. The main composition of this alloy are Cu +Ag 99.90min, P0.0015 / 0.040.
Copper -Silver alloy
The addition of a small amount of silver, whilst not increasing the melting point of copper, does increase the recrystallisation temperature by almost 100℃, and also helps to give better thermal conductivity at the operating temperatures.
This alloy is normally used in moulds for the continuous casting of blooms and slabs .In this case, the moulds are much thicker than in the billet moulds, and the moulds temperature can be higher. The main composition of this alloy are Cu+Ag99.90 min. Ag 0.08 / 0.12 O 0.004 / 0.012.
Copper Mould Tube supplier
The continuous casting of molten steel into billets, blooms and slab products, has been highly refined over the years into an extremely sophisticated system. The continuous casting process is expected to produce metallurgically sound products at the lower possible cost, and this is being achieved in many steelworks throughout the world.
Copper moulds have played an important role in the development of the continuous casting process. Their funcition is to receive the molten steel and to allow rapid heat transfer from the steel to the cooling water to enable quick solidification.
The mould must exhibit excellent thermal conductivity, be resistant for thermal erosion, and be resistant to distortion from thermal stress. So far only copper and a few copper alloys meet the above conditions, both economically and technically.
Mould cooling jacket supplier SOLIDIFICATION
The rate of solidification in the continuous casting process dictates the speed of production. The molten steel, which is in contact with the inner faces of the copper mould, starts to sllidify as rapidly as the heat is extracted, forming a shell. The shell increases in thickness as more heat is extracted, and eventually total solidfication is achieved. the process is similar to the solidification of ingots in ingot moulds. In continuous casting, the whole process is speeded up, with the aim to produce and homogeneous shell growth. Consequently, the mould is an important part of the continuous casting process, and the manufactured quality of the mould plays and important role in their length of life.
Inner surface coatings
Over the years, Metallurgists and Engineers have been working together to develop better continuous casting moulds. The steel companies require a more economical mould which will give a longer service life. Surface coating of the inner walls of the mould has given the best results to date. Coatings available are Chromium and Nickel plating. Also, a combination of the two give good results on slab casting.
Specifications of copper mould
Square Copper mould tube
Square 60 x 60 - 350 x 350 (mm)
Rectangle 120 x 160 - 180 x 300 (mm)
Round Copper Mould tube
Diameter 100-400 (mm)
Size(mm): 90x90, 100x100, 110x110, 115x115, 120x120
130x130, 135x135, 140x140, 143x143, 150x150
155x155, 160x160, 165x165, 175x175, 180x180
200x200, 220x220, 100x170, 100x173, 130x240
150x200, 150x210, 150x220, 160x200, 160x220
150x225, 160x235, 165x225, 175x225, 180x220
200x240, 240x240, 235x235
Radius(mm): 4000, 5000, 5250, 6000, 7000, 7500, 8000, 9000, 10250, 10300, 11000, 12000
Length(mm): 700, 750, 780, 790, 800, 810, 812, 850, 900, 1000
Company Contact:
Contact Name: Jack
Company Name: Sinometal Machinery Corp.
Email:
Tel: 86-0411-39625877
Fax: 86-0411-39625877
Street Address: No.3, Lanfeng Lane,
Shahekou District
Dalian, Liaoning 116001
China
Website: https://www.sinometalcarbon.com/
Member name: sinometalcarbon
Country: China
Member Since: 11 May 2020
Total Leads: 6 sinometalcarbon Import Export Business Leads
Business focus: Metallurgical Graphite Electrodes, Copper Mould Tube, Mould Cooling Jacket Manufacturer
Chat:
Verify: Safe Import Export Tips
We specially in supplying Copper Mould Tube, Crystallizing equipment of
continuous casters, Mould cooling jacket, Repair of Metallurgical Copper Mould Tube, etc.
Equipments & Spare parts for Continuous Casting Machine.
1. Copper mould tube( square, rectangle and round )
2. Crystallizing equipment of continuous casters
3. Mould cooling jacket.
4. repair of copper tube moulds
Copper mould alloys
The copper alloys chosen for the moulds must maintain their physical properties at the operating temperatures of the continuous casting process.
The temperature gradation from the inner wall of the mould to the outside face of the mould can cause serious distortion problems, and Metallurgical Copper Mould Tube is imperative that the correct alloy is chosen for the various operating conditions.
Square Copper mould tube STANDARD MATERIALS
Phosphorus de-oxidised copper
This alloy has been proven to be excellent for the manufacture of moulds in the continuous casting of billets. The main composition of this alloy are Cu +Ag 99.90min, P0.0015 / 0.040.
Copper -Silver alloy
The addition of a small amount of silver, whilst not increasing the melting point of copper, does increase the recrystallisation temperature by almost 100℃, and also helps to give better thermal conductivity at the operating temperatures.
This alloy is normally used in moulds for the continuous casting of blooms and slabs .In this case, the moulds are much thicker than in the billet moulds, and the moulds temperature can be higher. The main composition of this alloy are Cu+Ag99.90 min. Ag 0.08 / 0.12 O 0.004 / 0.012.
Copper Mould Tube supplier
The continuous casting of molten steel into billets, blooms and slab products, has been highly refined over the years into an extremely sophisticated system. The continuous casting process is expected to produce metallurgically sound products at the lower possible cost, and this is being achieved in many steelworks throughout the world.
Copper moulds have played an important role in the development of the continuous casting process. Their funcition is to receive the molten steel and to allow rapid heat transfer from the steel to the cooling water to enable quick solidification.
The mould must exhibit excellent thermal conductivity, be resistant for thermal erosion, and be resistant to distortion from thermal stress. So far only copper and a few copper alloys meet the above conditions, both economically and technically.
Mould cooling jacket supplier SOLIDIFICATION
The rate of solidification in the continuous casting process dictates the speed of production. The molten steel, which is in contact with the inner faces of the copper mould, starts to sllidify as rapidly as the heat is extracted, forming a shell. The shell increases in thickness as more heat is extracted, and eventually total solidfication is achieved. the process is similar to the solidification of ingots in ingot moulds. In continuous casting, the whole process is speeded up, with the aim to produce and homogeneous shell growth. Consequently, the mould is an important part of the continuous casting process, and the manufactured quality of the mould plays and important role in their length of life.
Inner surface coatings
Over the years, Metallurgists and Engineers have been working together to develop better continuous casting moulds. The steel companies require a more economical mould which will give a longer service life. Surface coating of the inner walls of the mould has given the best results to date. Coatings available are Chromium and Nickel plating. Also, a combination of the two give good results on slab casting.
Specifications of copper mould
Square Copper mould tube
Square 60 x 60 - 350 x 350 (mm)
Rectangle 120 x 160 - 180 x 300 (mm)
Round Copper Mould tube
Diameter 100-400 (mm)
Size(mm): 90x90, 100x100, 110x110, 115x115, 120x120
130x130, 135x135, 140x140, 143x143, 150x150
155x155, 160x160, 165x165, 175x175, 180x180
200x200, 220x220, 100x170, 100x173, 130x240
150x200, 150x210, 150x220, 160x200, 160x220
150x225, 160x235, 165x225, 175x225, 180x220
200x240, 240x240, 235x235
Radius(mm): 4000, 5000, 5250, 6000, 7000, 7500, 8000, 9000, 10250, 10300, 11000, 12000
Length(mm): 700, 750, 780, 790, 800, 810, 812, 850, 900, 1000
Company Contact:
Contact Name: Jack
Company Name: Sinometal Machinery Corp.
Email:
Tel: 86-0411-39625877
Fax: 86-0411-39625877
Street Address: No.3, Lanfeng Lane,
Shahekou District
Dalian, Liaoning 116001
China
Website: https://www.sinometalcarbon.com/
Member name: sinometalcarbon
Country:
ChinaMember Since: 11 May 2020
Total Leads: 6 sinometalcarbon Import Export Business Leads
Business focus: Metallurgical Graphite Electrodes, Copper Mould Tube, Mould Cooling Jacket Manufacturer
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Seamless Copper Tube - By BuckCopperGroup - On Tuesday 1 March 2022 3:42 am: copper tube standard astm aisi jis iso en bs gb etc
material t1 t2 t3 c11000 c11100 c11300 c11400 c11500 c1100 tu1 tu2 c10200 ....
Copper And Copper Alloy Wire - By copperwiremesh - On Monday 11 September 2023 2:51 am: copper alloy wire is a widely used material known for its exceptional electrical conductivity thermal conductivity corrosion resistance and ductili....
Copper Cathode - By BuckCopperGroup - On Wednesday 13 April 2022 9:55 am: copper cathode
copper cathode standard astm aisi jis iso en bs gb etc
material cu-cath-1 cu-cath-2 etc
length as customers requirement
size can ....
Copper Casting - By FoundrySeiko - On Thursday 7 July 2022 9:38 am: copper casting
category copper alloy casting
copper casting the copper appears rose red as a whole and after an oxide film is formed on the surfac....
Auto Bumper Mould - By haiyanautomould - On Wednesday 11 May 2022 1:21 am: mould trade process
1 quote according to sample drawing and specific requirement
2 discussion mold material cavity number price runner paym....
Concrete Pile Mould - By zongheng - On Saturday 13 May 2023 7:06 am: mould for fluid concrete forming but aslo a coordinating equipment for prestressing
amp #9733 advantage high level of solidity with thickened a....
Copper Flat Wire - By BuckCopperGroup - On Tuesday 22 March 2022 9:41 am: copper flat wire standard astm aisi jis iso en bs gb etc
material t1 t2 t3 c11000 c11100 c11300 c11400 c11500 c1100 tu1 tu2 c10....
Flat Copper Wire - By copperwiremesh - On Tuesday 12 September 2023 6:39 am: copper wire is a vital component in numerous industries serving as a conduit for electricity and a foundation for intricate electrical systems tradi.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Taizhou Huangyan Chengxun Plastic Mould Factory: Sissi Of Taizhou Huangyan Chengxun Plastic Mould Factory From China
- Nice Mold Industrials Ltd: Peter Pi oF Nice Mold Industrials Ltd, A Mold Maker From China
- Kornik Export Company: Ekambi Pramarasse Of Kornik Export Company From Thailand
- Jie Mei Precision Mould Ltd: John Zhang Of Jie Mei Precision Mould From China
- Prelead Industy Co Ltd: Norman Cao Of Prelead Industry, A Trading Company Specializing In Industrial And Electrical Products And Plastic Injection Molding From China
Welded copper bent tube Classification Navigation
Main - Distribution and Conditioning Systems and Equipment and Components - Tubes tubing and tube fittings - Welded copper tubes - Welded copper bent tube [2]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely