-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 18 visiting from 
9 Singapore 
7 UK 2 USA
Hello visitor from
USA - 18 visiting from 9 Singapore 7 UK 2 USA
- Apankai (China): Black Annealed Wire, Galvanized Wire, Cotton Bale Ties, Barbed Wire, Welded Wire Mesh, Woven Wire... http://webwiremesh.com
Five-finger Scratch Tester 710
Posted at: Offers to Sell and Export | Posted on: Thursday 16 September 2021 7:14 am | Poster last visit: Friday 22 October 2021 |
Product Category: Main
» Engineering and Research and Technology Based Services
» Manufacturing technologies
» Quality control
» Materials testing
» Five-finger Scratch Tester 710
Product Description:TABER Scratch Tester Multi-finger Scratch Tester Five-finger Scratch Tester 710
TABER Muti-Finger Scratch
/ Mar Tester-Model 710 is used to measure the relative resistance or sensitivity of the material surface to scratches, abrasions, gouges, scratches, engraving and other similar physical damages. It does not belong to ordinary wear. Based on the equipment described in popular automotive specifications, this instrument is often referred to as a five-finger (five-arm) scratch and abrasion tester, which is often used to evaluate plastics.
describe
Multi-Finger Scratch / Mar Tester includes a pneumatically driven movable platform on which test samples are installed. The platform moves in a linear manner and is operated by the control knob to perform single or multiple pass tests. The electronic timer displays the speed, and the speed can be controlled by reducing or increasing the air pressure.
The gantry supports five independent spline fingers to provide a constant vertical load on interchangeable scraping heads. The gantry system includes a handle for raising and lowering the arm. In addition, five support frames are included to allow one or more arms to be moved to an upright resting position so that the arms do not touch the sample during the test.
Taber Multi-Finger Scratch / Mar Tester
A single weight with different loads is installed on the top of the finger of each arm to apply a standard force on the surface of the test material. Each instrument includes a set of 2N, 3N, 4N, 5N, 6N, 7N, 10N, 15N, and 20N loads. Optional recombination is also provided, including 4N, 8N, 9N, 12N or 8N, 13N, 18N weights. In addition, an optional weight of 25N or a precision weight kit that can achieve a load of 0.6N is also provided.
Although it is common to test flat specimens up to 22 mm thick, the "free-floating" arm fingers allow you to test slightly contoured specimens, as long as they are rigid or adequately supported. The spring-loaded sample holder is standard and can be installed on the end or side of the movable platform for greater flexibility. In order to install the profile specimen, two specimen clamps are provided. The optional 5 mm gasket set can be used to raise the rack to accommodate samples greater than 22 mm thick.
Five-finger scratch tester
The Taber710 five-finger scratch tester is often used in the testing of automotive related test standards and is often used in the evaluation of plastics. The Taber710 five-finger scratch tester uses tungsten carbide as the scratch finger, and the surface is reasonably exhausted by very prescribed physical forms (such as scratching, scratching, scraping, etc.).
Function
Using tungsten carbide as a scratching finger can detect surface aging that is damaged by a very prescribed physical form (such as scratching, scratching, gouging, etc.).
Ps: (wljcdm809)
Company Contact:
Contact Name: Unique Xu
Company Name: Qinsun Instruments (shanghai) Co., Ltd.
Email:
Tel: +86-021-6420 0566
Fax: +86-21-6420 0566-810
Street Address: No. 258, Banting Rd,
Songjiang District
Shanghai, China 200213
China
Website: https://www.qinsun-lab.com
Member name: qinsunlab
Country:
China
Member Since: 16 March 2016
Total Leads: 168 qinsunlab Import Export Business Leads
Business focus: Manufacturing Textile Testing Equipment, Laboratory Equipment, Protective Clothing Testing Equipment, Mask Testing Equipment
Chat:
Verify: Safe Import Export Tips
TABER Muti-Finger Scratch
/ Mar Tester-Model 710 is used to measure the relative resistance or sensitivity of the material surface to scratches, abrasions, gouges, scratches, engraving and other similar physical damages. It does not belong to ordinary wear. Based on the equipment described in popular automotive specifications, this instrument is often referred to as a five-finger (five-arm) scratch and abrasion tester, which is often used to evaluate plastics.
describe
Multi-Finger Scratch / Mar Tester includes a pneumatically driven movable platform on which test samples are installed. The platform moves in a linear manner and is operated by the control knob to perform single or multiple pass tests. The electronic timer displays the speed, and the speed can be controlled by reducing or increasing the air pressure.
The gantry supports five independent spline fingers to provide a constant vertical load on interchangeable scraping heads. The gantry system includes a handle for raising and lowering the arm. In addition, five support frames are included to allow one or more arms to be moved to an upright resting position so that the arms do not touch the sample during the test.
Taber Multi-Finger Scratch / Mar Tester
A single weight with different loads is installed on the top of the finger of each arm to apply a standard force on the surface of the test material. Each instrument includes a set of 2N, 3N, 4N, 5N, 6N, 7N, 10N, 15N, and 20N loads. Optional recombination is also provided, including 4N, 8N, 9N, 12N or 8N, 13N, 18N weights. In addition, an optional weight of 25N or a precision weight kit that can achieve a load of 0.6N is also provided.
Although it is common to test flat specimens up to 22 mm thick, the "free-floating" arm fingers allow you to test slightly contoured specimens, as long as they are rigid or adequately supported. The spring-loaded sample holder is standard and can be installed on the end or side of the movable platform for greater flexibility. In order to install the profile specimen, two specimen clamps are provided. The optional 5 mm gasket set can be used to raise the rack to accommodate samples greater than 22 mm thick.
Five-finger scratch tester
The Taber710 five-finger scratch tester is often used in the testing of automotive related test standards and is often used in the evaluation of plastics. The Taber710 five-finger scratch tester uses tungsten carbide as the scratch finger, and the surface is reasonably exhausted by very prescribed physical forms (such as scratching, scratching, scraping, etc.).
Function
Using tungsten carbide as a scratching finger can detect surface aging that is damaged by a very prescribed physical form (such as scratching, scratching, gouging, etc.).
Ps: (wljcdm809)
Company Contact:
Contact Name: Unique Xu
Company Name: Qinsun Instruments (shanghai) Co., Ltd.
Email:
Tel: +86-021-6420 0566
Fax: +86-21-6420 0566-810
Street Address: No. 258, Banting Rd,
Songjiang District
Shanghai, China 200213
China
Website: https://www.qinsun-lab.com
Member name: qinsunlab
Country:
ChinaMember Since: 16 March 2016
Total Leads: 168 qinsunlab Import Export Business Leads
Business focus: Manufacturing Textile Testing Equipment, Laboratory Equipment, Protective Clothing Testing Equipment, Mask Testing Equipment
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Multi-finger Scratch / Mar Tester 710 Rotary Friction Tester - By qinsunlab - On Monday 2 August 2021 8:35 am: scratch mar tester 710 rotary friction tester
uses multi-finger scratch mar tester 710 is used to test the dry and wet rubbing fastness of fabrics ....
Multi-finger Scratch / Mar Tester 710 By Qinsun Instruments - By qinsunlab - On Monday 16 August 2021 6:16 am: scratch mar tester 710 by qinsun instruments
brief introduction
resistant scratch tester is mainly used to evaluate shear scratches planing scra....
Taber Multi Finger Scratch Tester Multi-finger Scratch And Mar Tester - By qinsunlab - On Friday 30 July 2021 8:46 am: finger scratch mar tester 710
multi-finger scratch and mar tester
multi-finger scratch mar tester
taber multi finger scratch tester
taber multi fi....
Taber Taber 710 Scratch Resistance Tester - By qinsunlab - On Thursday 16 September 2021 7:18 am: five finger scratch tester
taber 710 scratch resistance tester taber five-finger scratch tester meets the standards
ford bn 108-13
general motors .... Taber® Multi-finger Scratch / Mar Tester - By qinsunlab - On Saturday 18 September 2021 6:04 am: five independent splined-fingers which provide a constant vertical load on interchangeable scratch tips the gantry system includes a handle to rais....
Best Stoll Quartermaster Multi-finger Scratch And Mar Tester - By qinsunlab - On Friday 30 July 2021 8:44 am: scratch and mar tester
applications of stoll quartermaster universal wear tester
stoll quartermaster universal wear tester
the stoll quartermaste....
Material Surface Resistance Testing Multi-finger Scratch / Mar Tester - By qinsunlab - On Monday 2 August 2021 7:26 am: finger scratch mar tester features a pneumatically driven moveable platform on which the test specimen is placed a control knob is used to operate t....
Taber Linear Scratch Tester 5750 Abrasion Tester Linear Abraser - By qinsunlab - On Thursday 12 August 2021 7:01 am: scratch abraser tester to evaluate the abrasion resistance scratch resistance of products single or multiple scratches and the transitivity of col.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Denjoy Dental Co Ltd: Joanna Jiang Of Denjoy Dental Manufacturing Endodontic Equipment From China
Materials testing Classification Navigation
Main - Engineering and Research and Technology Based Services - Manufacturing technologies - Quality control - Materials testing [190]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely