-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 42 visiting from 20 USA 
17 Canada 
1 Germany 
1 Poland 
1 Singapore 
1 UK 
1 France
Hello visitor from
USA - 42 visiting from 20 USA 17 Canada 1 Germany 1 Poland 1 Singapore 1 UK 1 France
Good Quality Flyback 60watt Hv Co2 Laser Psus 60w Co2 Laser Power Device
Posted at: Offers to Sell and Export | Posted on: Tuesday 31 October 2023 8:29 am | Poster last visit: Tuesday 26 December 2023 |
Product Category: Main
» Medical Equipment and Accessories and Supplies
» Surgical products
» Surgical equipment and accessories and related products
» Surgical lasers or accessories
» Good Quality Flyback 60watt Hv Co2 Laser Psus 60w Co2 Laser Power Device
Product Description:
Zr-60w co2 power source
Feature:
1.The HV laser power supply has stable laser output. Each 60W laser power
supply have been much more rigorous testing procedures, under full load high temperature (52~55 degrees Celsius) 24 hours of aging to ensure high stability of each carbon dioxide laser power supply.
2. The 220V input laser power supply's control is easy and simple. It adopts high or low level control, the TTL-level control makes laser beam’s output start and stop quickly.
3. This.60W laser power supply uses imported USA, Japan, German, France and Taiwan’s high quality components for major parts to avoid the error in future and strengthen lifetime. The carbon dioxide laser power supply can be widely used to drive 1200mm or 1250mm 60W CO2 laser tube made by different factories.
4. This 220V inpuit laser power supply's main advantage is high frequency, quick response speed, less volume, less weight, easy operation with complete protecting function.
5.The HV laser power supply has the protection switch. Laser power control is simple, it can use 0 - 5V analog signal or PWM (pulse width modulation) signal to adjust and control laser power’s output.
6. The carbon dioxide laser power supply has LCD display module: (optional) .Because of it, it do not need to open the outside case. Operator can simply find ordinary code faults and output current at LCD display screen of 220V input laser power supply and easy remove the trouble. Also the output current can be adjusted by potentiometer on the LCD module
7.The 60W laser power supply has excellent protection function. The carbon dioxide laser power supply has open circuit protection, which make the 220V input laser power supply short-term work in the open circuit status which avoid the laser tube burst due to the damage caused by HV laser power supply. In this way it greatly enhancing the 60W laser power supply’s service time.
8.This ZR-60W CO2 laser power supply uses ordinary H/L/P/G/IN/5V ports to accept laser power's control signal and galvanized steel case.
Specification
lnput Input voltage AC220V±10% (AC110V specified while order)
AC frequency 47~440HZ
Maximum input power 490W
Maximum input current 2.2A
Output Maximum output voltage 25KV
Maximum output current 28mA
(depending on the laser tubes of different manufacturers)
Efficiency More than 90% (Full load)
Response speed Not more than 1ms
Control lnterace TTL multilevel switching control, effective level can be high and low selection (see control wining diagram)
Insulation lnput-output AC 1500V 1 minutes not more than 10mA
lnput-shell AC 1500V 1 minutes not more than10mA
Output-shell Connection
Open Circuit Protection Can be short circuit (requires a good grounding shell, while avoiding the positive electrode and the shell between the arc)
Environmental Requested Working temperature -10℃~50℃
Storage of temperature -20℃~75℃
Relative Humidity Maximum 85%RH (non-condensing)
Altitude 100, 000 feet of work
200, 000 feet of storage, dose not work
Cooling methods Forced air cooling (fan cooling)
Dimensions (LxWxH) 210mmx145mmx102mm
Company Contact:
Contact Name: Xu Kuishan
Company Name: Jinan Ruby Laser Technology Co., Ltd
Email:
Tel: +86-15253146378
Fax: +86-531-58181378
Street Address: 8510 Room, Huiju building,
West Erhuan Road, Tianqiao district jinan,
Shandong 250032 china
Other Contact Info:
Whatsapp: +86-15253146378
Website: http://www.rlaserpowersupply.com
Member name: ZRsuns
Country:
China
Member Since: 31 October 2023
Total Leads: 7 ZRsuns Import Export Business Leads
Business focus: Co2 Power Supply, Laser Power Supply, Co2 Psu
Chat:
Verify: Safe Import Export Tips
Feature:
1.The HV laser power supply has stable laser output. Each 60W laser power
supply have been much more rigorous testing procedures, under full load high temperature (52~55 degrees Celsius) 24 hours of aging to ensure high stability of each carbon dioxide laser power supply.
2. The 220V input laser power supply's control is easy and simple. It adopts high or low level control, the TTL-level control makes laser beam’s output start and stop quickly.
3. This.60W laser power supply uses imported USA, Japan, German, France and Taiwan’s high quality components for major parts to avoid the error in future and strengthen lifetime. The carbon dioxide laser power supply can be widely used to drive 1200mm or 1250mm 60W CO2 laser tube made by different factories.
4. This 220V inpuit laser power supply's main advantage is high frequency, quick response speed, less volume, less weight, easy operation with complete protecting function.
5.The HV laser power supply has the protection switch. Laser power control is simple, it can use 0 - 5V analog signal or PWM (pulse width modulation) signal to adjust and control laser power’s output.
6. The carbon dioxide laser power supply has LCD display module: (optional) .Because of it, it do not need to open the outside case. Operator can simply find ordinary code faults and output current at LCD display screen of 220V input laser power supply and easy remove the trouble. Also the output current can be adjusted by potentiometer on the LCD module
7.The 60W laser power supply has excellent protection function. The carbon dioxide laser power supply has open circuit protection, which make the 220V input laser power supply short-term work in the open circuit status which avoid the laser tube burst due to the damage caused by HV laser power supply. In this way it greatly enhancing the 60W laser power supply’s service time.
8.This ZR-60W CO2 laser power supply uses ordinary H/L/P/G/IN/5V ports to accept laser power's control signal and galvanized steel case.
Specification
lnput Input voltage AC220V±10% (AC110V specified while order)
AC frequency 47~440HZ
Maximum input power 490W
Maximum input current 2.2A
Output Maximum output voltage 25KV
Maximum output current 28mA
(depending on the laser tubes of different manufacturers)
Efficiency More than 90% (Full load)
Response speed Not more than 1ms
Control lnterace TTL multilevel switching control, effective level can be high and low selection (see control wining diagram)
Insulation lnput-output AC 1500V 1 minutes not more than 10mA
lnput-shell AC 1500V 1 minutes not more than10mA
Output-shell Connection
Open Circuit Protection Can be short circuit (requires a good grounding shell, while avoiding the positive electrode and the shell between the arc)
Environmental Requested Working temperature -10℃~50℃
Storage of temperature -20℃~75℃
Relative Humidity Maximum 85%RH (non-condensing)
Altitude 100, 000 feet of work
200, 000 feet of storage, dose not work
Cooling methods Forced air cooling (fan cooling)
Dimensions (LxWxH) 210mmx145mmx102mm
Company Contact:
Contact Name: Xu Kuishan
Company Name: Jinan Ruby Laser Technology Co., Ltd
Email:
Tel: +86-15253146378
Fax: +86-531-58181378
Street Address: 8510 Room, Huiju building,
West Erhuan Road, Tianqiao district jinan,
Shandong 250032 china
Other Contact Info:
Whatsapp: +86-15253146378
Website: http://www.rlaserpowersupply.com
Member name: ZRsuns
Country:
ChinaMember Since: 31 October 2023
Total Leads: 7 ZRsuns Import Export Business Leads
Business focus: Co2 Power Supply, Laser Power Supply, Co2 Psu
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Zrsuns Blue Color Ac110 / 220v 40w Co2 Laser Power Supply 700mm Glass Type Co2 Laser Tube Driver - By ZRsuns - On Tuesday 31 October 2023 8:07 am: co2 laser power supplies
feature
1 because of many protect function this green signal terminal laser power source dramatically lengthen the lifetim....
Two Flybacks Air Cooling Zr-80w / 100w Co2 Laser Power Supplies For 1450mm Co2 Tube - By ZRsuns - On Wednesday 1 November 2023 8:57 am: co2 power sources
feature
1 the 100w laser power supply unit can match with efr spt yongli weiju and other brands 140-145cm sealed glass type c....
Factroy Sell Air Cooling Gray Color Zr-50w High Voltage Co2 Laser Power Source For 1000mm Co2 Tube - By ZRsuns - On Tuesday 31 October 2023 8:24 am: co2 power supplies
feature
1 this zr-50w co2 power supply adopts g p l g in 5v as control signal output port with 5v 24v output and use gray alumin....
Lcd Display Screen 80w / 100w Hv Co2 Psu Co2 Cutting Power Supply For 80w Laser Tube - By ZRsuns - On Tuesday 31 October 2023 8:34 am: co2 power supplies
feature
1 this high voltage laser power supplies’s control interface is applicable to high low level signal ttl level is to con....
Zr-150 Watt Hv Co2 Laser Power Device 220 / 110v Air Cooling Hv Psu - By ZRsuns - On Wednesday 22 November 2023 8:32 am: co2 laser power supply
feature
1 the 150w co2 power source’s control is easy and simple it adopts high or low level control the ttl-level contro....
0-5w / Pwm Analog Signal Control Zr-120w Hv Co2 Psu Zr-120w Laser Power Unit - By ZRsuns - On Wednesday 1 November 2023 9:05 am: co2 laser power supply
feature
1 the air cooling co2 power supply has open circuit function a good grounding in the case of protection the 120wa....
Industrial Chiller Cw-5200 For Co2 Laser - By teyuchillers - On Tuesday 27 June 2023 8:55 am: co2 laser cutter and so on
main features
1 temperature stability ±0 3 amp #8451
2 cooling capacity 1080w active cooling
3 temperature c....
Co2 Laser Cutting Machine Stl1325a - By sequoyatec - On Wednesday 19 October 2022 3:22 am: co2 laser machine stl1325a and 1325b is appearance both of them are with 1300x2500mm working size mainly used for big size material cutting
co2 la.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Wavespectrum Laser Inc: Bruce Yu Of Wavespectrum Laser, A Manufacturer High Power Semiconductor Lasers From China
- Ever Tech Laser Technology: Edward Elric Of Ever Tech Laser Technology A Manufacturing Company For Laser Machinery From China
- Prelead Industy Co Ltd: Norman Cao Of Prelead Industry, A Trading Company Specializing In Industrial And Electrical Products And Plastic Injection Molding From China
- Burright Lights: Andy Burr Of Burright Lights A Professional Musician And An Importer Of LED lights To The USA Market
- Jinhua Sunrise Electronic Co Ltd: Andy Peng Of Jinhua Sunrise Electronic From China
Surgical lasers or accessories Classification Navigation
Main - Medical Equipment and Accessories and Supplies - Surgical products - Surgical equipment and accessories and related products - Surgical lasers or accessories [2]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely