Proper use of feed machinery can increase material utilization and increase revenue. Zhengzhou Fusmar
Machinery is a professional feed mill equipment manufacturer.
Reducing The Power Consumption Of Feed Machinery
In the production process of feed machinery, a large amount of electric energy is inevitably consumed. At the same time, it will generate a lot of power consumption costs. In order to save costs and reduce power consumption, we must take some effective measures in light of the actual situation. First of all, before the production of feed machinery, it is necessary to prepare in advance, and the production process must well-connect, and the time is compact and reasonable.
It should note that during the operation of the feed machinery, the staff should shorten the production preparation time. And the idling of the equipment as much as possible to avoid the waste of manpower, electricity, fuel, and time costs.
Meeting The Production Standards
To achieve such production standards, management and supervision also needed to minimize power consumption. In addition to this, it is also necessary to minimize feed machinery downtime and repair time. That is to say, in actual production, for different production requirements, suitable feed machinery should select for production and processing. This can also reduce power consumption to a certain extent.
Make Sure The Machine Is Safe In The Use
First of all, in order to avoid accidents in the transportation, loading, and unloading of the feed machinery. It is necessary to check whether the bolts and nuts of all parts are loose before use. Whether the flat teeth, the scallops, and the spindle nut are loose or not, and tighten them in time. Then turn the pulley by hand to check the machine for collisions. At the same time, it is necessary to check whether the feed mill equipment can maintain flexible operation. If there is any debris in the machine, it must clean up. It generally requires to let the equipment run dry for a while before confirming that there is no abnormal problem before normal production can begin.
Secondly, in the process of operating the feed machinery, we must pay attention to strictly control the cleanliness of the materials. If there is any debris in the materials, it is necessary to clean them up. It is strictly forbidden to enter the machine with iron and stone, so as to avoid injury to the machine. In addition, the receiving cloth bag should have a length of more than 4 meters and a diameter of 0.6 meters. The cloth should not too dense. It should discharge in time to ensure that the bag has sufficient air permeability.
Third, during the operation of the feed pellet machine, it is also necessary to strictly control the feeding. It should note that the feeding should keep even, pay attention to the degree of power load, and avoid being caught. The amount of the plate adjuster can use to crush the pellets. It should note that when the wear of one corner affects the working efficiency, the hammer can turn on the reverse side (the four groups adjusted together at the same time to avoid causing the rotor to unbalance). The replacement hammer should replace completely.
Proper Use Of The Feed machinery
Proper use of feed machinery closely related to the quality and efficiency of the feed production process. That is to say, the correct operation can appropriately extend the service life of the feed pellet machine. As a user, in daily use, we should take care to maintain equipment and ensure safe production.
In addition, before using the feed mill equipment every day, the lubrication should check, the appropriate amount of lubricant should add in advance, and the bearing condition should check regularly. The burr side should mound on the screen when installing the screen. According to the fineness of the pulverized material, sieves of different diameter sieve holes selected. In addition, the rational design of the feed machinery and the choice of parameters must also be reasonable.
Zhengzhou Fusmar Machinery as a professional feed mill equipment manufacturer has the advantages of advanced structure, reliable performance, low energy consumption, and stable operation. Provide each customer with intimate pre-sales and after-sales professional services, from product introduction to production site and customer equipment worksite visit.
Contact Name: Amy Yan
Company Name: Zhengzhou Fusmar Machinery Co., Ltd
Street Address: No.45 Agricultural
Road, Jinshui District Zhengzhou,
Henan 450003 China
Other Contact Info:
Member name: FusmarMachinery
Member Since: 28 May 2019
Total Leads: 216 FusmarMachinery Import Export Business Leads
Business focus: Pellet Mill, Fish Feed Machine, Charcoal Briquette Machine
Verify: Safe Import Export Tips