-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 61 visiting from 40 USA 
19 Canada 
2 UK
Hello visitor from
USA - 61 visiting from 40 USA 19 Canada 2 UK
Hydraulic Press Brake
Posted at: Offers to Sell and Export | Posted on: Tuesday 13 July 2010 7:10 am | Poster last visit: Thursday 23 December 2010 |
Product Category: Main
» Industrial Manufacturing and Processing Machinery and Accessories
» Metal forming machinery and accessories
» Metal bending machines
» Hydraulic press brake
» Hydraulic Press Brake
Product Description:
Product Description
This model of hydraulic press brake(hydraulic bending machine) has following performance:
model:
series 2-WE67K
1 The frame of machine is composed of tank, worktable, left and right housings and ram. So it has high strength and good rigidity. Also it takes vibration to eliminate stress.
2 Synchronization working principal of both machines: Adopting electric-hydraulic proportional valve to ensure the synchronization of both machines. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to inspect the position of ram continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to C plates, not on housing plates directly, the deflection of ram and frame when working will not effect its measuring and controlling precision. When two machines working together, the differential potentiometer installed between two machines will transfer the mechanic synchronizing signal into electronic one and feed back to synchronization plate and control system. The signal will be enlarged by BOSCH amplifier to control the synchronization of both machines by controlling electric-hydraulic proportional valve. So the synchronization of two machines is achieved with high precision.
3 Through computer, the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point. The strokes (Y1, Y2) of ram could make a small tilt to meet the special requirement of user.
4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job.
5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.
6 The surface of cylinder has good wearing and heat treatment, so it has good lubrication and long service life.
welcome to contact us using information below
Company Contact:
Contact Name: Sales
Company name: Wuxi Jinqiu Machinery Co., Ltd
Email:
Tel: 86-510-82569552
Fax: 86-510-83211937
Street Address: 54 Qianwei Road,
Qianqiao, Wuxi, Jiangsu, China
Member name: WUXI JINQIU MACHINERY
Country:
China
Member Since: 27 June 2007
Total Leads: 9 WUXI JINQIU MACHINERY Import Export Business Leads
Business focus: Press Brake, Guillotine Shear, Metal Bending Machine, Metal Cutting Machine
Chat:
Verify: Safe Import Export Tips
This model of hydraulic press brake(hydraulic bending machine) has following performance:
model:
series 2-WE67K
1 The frame of machine is composed of tank, worktable, left and right housings and ram. So it has high strength and good rigidity. Also it takes vibration to eliminate stress.
2 Synchronization working principal of both machines: Adopting electric-hydraulic proportional valve to ensure the synchronization of both machines. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to inspect the position of ram continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to C plates, not on housing plates directly, the deflection of ram and frame when working will not effect its measuring and controlling precision. When two machines working together, the differential potentiometer installed between two machines will transfer the mechanic synchronizing signal into electronic one and feed back to synchronization plate and control system. The signal will be enlarged by BOSCH amplifier to control the synchronization of both machines by controlling electric-hydraulic proportional valve. So the synchronization of two machines is achieved with high precision.
3 Through computer, the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point. The strokes (Y1, Y2) of ram could make a small tilt to meet the special requirement of user.
4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job.
5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.
6 The surface of cylinder has good wearing and heat treatment, so it has good lubrication and long service life.
welcome to contact us using information below
Company Contact:
Contact Name: Sales
Company name: Wuxi Jinqiu Machinery Co., Ltd
Email:
Tel: 86-510-82569552
Fax: 86-510-83211937
Street Address: 54 Qianwei Road,
Qianqiao, Wuxi, Jiangsu, China
Member name: WUXI JINQIU MACHINERY
Country:
ChinaMember Since: 27 June 2007
Total Leads: 9 WUXI JINQIU MACHINERY Import Export Business Leads
Business focus: Press Brake, Guillotine Shear, Metal Bending Machine, Metal Cutting Machine
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Press Brake Machine Hydraulic - By havenmachine - On Wednesday 11 May 2022 7:09 am: hydraulic
the machine features hi-accuracy hi-speed and energy saving by 40% the servo motor drives the hydraulic pump electro-hydraulic servo valve....
Hydraulic Cnc Press Brake We67k-100 / 3200 Da66t - By havenmachine - On Wednesday 11 May 2022 7:08 am: hydraulic cnc press brake we67k-100 3200 da66t
machine introduction
we67k-100 3200 da66t servo motor hydraulic press brake machine for sale
we67k ....
Cnc Milling Parts Hydraulic Brake Parts - By Jioutianjing - On Saturday 24 February 2024 7:07 am: hydraulic brake parts and cnc milling is crucial our commitment as a manufacturing powerhouse extends to delivering top-notch solutions for your need....
Wholesale 3m Woven Rubber Brake Pad Anti-noise Brake Shim - By BNbrake - On Wednesday 9 November 2022 2:30 am: brake pad shim anti-noise shim 3m brake shim
1 brake pad shim material 65mn steel
2 brake pad shim material metal shim rubber shim woven shim ....
Automotive Brake System Brake Parts Stainless Steel Abutment Clip - By CangzhouXinlidaHardware - On Friday 3 February 2023 3:45 am: brake pad and the brake caliper providing a uniform contact surface for the brake pad fixing and guiding the movement of the brake pad helping to s....
Wholesale Brake Accessories Hardware Clamper For Auotomotive Disc Brake Pad - By BNbrake - On Wednesday 9 November 2022 7:44 am: brake accessories hardware clamper for automotive disc brake pad
description
material spring steel
process stamping amp amp forming
application....
Brake Parts Ptfe Composite Material Brake Abutment Clips - By CangzhouXinlidaHardware - On Friday 3 February 2023 3:46 am: brake pad and the brake caliper providing a uniform contact surface for the brake pad fixing and guiding the movement of the brake pad helping to s....
Brake Parts 301 Glue Material Brake Abutment Clips - By CangzhouXinlidaHardware - On Friday 3 February 2023 3:49 am: brake pad and the brake caliper providing a uniform contact surface for the brake pad fixing and guiding the movement of the brake pad helping to s.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Zhengzhou Maolin Mechanical And Electronic Equipment: Ken Zhang Of Zhengzhou Maolin Mechanical and Electronic Equipment From China
Hydraulic press brake Classification Navigation
Main - Industrial Manufacturing and Processing Machinery and Accessories - Metal forming machinery and accessories - Metal bending machines - Hydraulic press brake [88]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely