Use in positive and reverse running
-Output From 6W to 120W
-Single Phase and Three Phase are available
lead wire and terminal box connection is available
Insulation resistance : Use a DC500V high resistance gauge to measure the coil of motor and it's a outer shell when motor running in normal temperature and normal humidity, its value should be above 100MΩ
Insulation pressure endurance : Apply 60Hz, 1.5kV at the coil of motor and it's a outer shell for one minute without and extraordinary phenomenon when motor running in normal temperature and normal humidity.
Temperature arise : Install two reduction gears or radiation plate of the same class at the motor. After rated running, test the coil by resistance method. Its value should be less than 80°C.
Insulation Class : Class B (130°C)
Overheat protection : Over heat shut down system. (If extra protection with overheat is needed please specify when ordering.)
Environment temperature : -10°C～+50°C
Humid around the environment : Below 85% (No frosting happen)