-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 35 visiting from 24 USA 
9 Canada 
1 Germany 
1 UK
Hello visitor from
USA - 35 visiting from 24 USA 9 Canada 1 Germany 1 UK
S355m Fine-grain Structural Steels, Thermomechanically-rolled
Posted at: Offers to Sell and Export | Posted on: Wednesday 13 April 2011 8:00 am | Poster last visit: Wednesday 12 October 2011 |
Product Description:
S355M Fine-grain structural steels, thermomechanically-rolled
Matreial number:108823
Analogic:DIN EN
10025-4
Tensile strength class:B
1.Its usage
The series of thermomechanically-rolled fine-grain structural steels is characterised by a minimum
yield strength of 275-460 N/mm2, by good weldability and high resistance to brittle cracking.They
are used above all for highly stressed welded structures in the construction of bridges and steel structures.
2.Its mechanical properties
The tensile test value of S355M is 470 to 630 Mpa and its total elongation is ≥22%.
Its yield strength is ≥355Mpa when the thickness is ≤16mm, on the contraty when its thickness is >16mm, its yield strength is ≥345Mpa.
2.Welding
The sine-grain structural steel grades of this series can be perfectly welded both manually and using automatic equipment by means of all known welding processing, not least due to their reduced carbon content and the low carbon equivalent value.In genaral, pre-heating prior to wealding is not necessary due to the low tendency to cold-cracking.However, the
quality of the weld joint depends on the welding process, the welding conditions and the
selection of the correct filler metals.Gas welding should not be used.
The welding wires and electrodes approved in this strength category must be used as filler metals.Basic coated electrodes are recommended for manual welding.And these fine-grain structural steel grades are not suitable for heat treatment above 580℃.Stress relief annealing(530-580℃)is required only if called for in the regulations or if manufacturing conditions make a reduction of the residual welding stresses appear useful.The holding time should be between 30 and 60 minutes.
3.Condition of delivery, scope of testing and certificate
The provisions of EN 10025-4 shall apply for delivery and specification, .The products are themomechanically-rolled and we can delivery the products according to your requirements.What’s more our divery time in generally 20 to 40 days.
Standard: AISI, ASTM, BS, DIN, GB, JIS
Grade: S355M
Thickness: 2-460mm
Place of Origin: Henan China (Mainland)
Brand Name: BEBON
Model Number: S355M
Type: Steel Plate Technique: Hot Rolled
Width: 1500-3000mm Length: 3000-18000mm
Packaging & Delivery
Packaging Detail: standard export packing as customer's requirement
Delivery Detail within 20 days after receiving the L/C or T/T
Henan BEBON international co., ltd, located in zhengzhou, henan province of china, is specialized in manufacturing and exporting steel. Based on the domestic rich product resources and professional research on international market, BEBON'service has already spread many countries in Europe, America, Southeast Asia, Middle East, South America, Africa, and so on .
Our company's main product is steel
About steel, our produce mainly contains hot rolled steel plate/coil, angle steel, flat bar, steel pipe, stainless steel In ASTM/ASME/EN/JIS/ST/SB/ISO standard.
Our service shows three pieces of advantage:1. we have our storage in Tianjin and Shanghai, and the product material quality is complete, the reserve is big, and delivery can be immediate. 2. Our service is the "one-stop" work style. We have our processing factory and the pre-treatment factory, can make the customers enjoy cutting, welding, drilling holes, ball blasting, derusting, painting, galvanizing by the lowest cost price.
High and new technology industrial development zone, Zhengzhou city of Henan province, China
6.If interested, please free to contact us
Company Contact:
Contact Name: Manager Liu
Company Name: BeBon International
Email:
Tel: 008637186151627
Fax: 008637186011881
Street Address: Room2801,
International Enterprise Center 2#,
Zhengzhou City Of Henan Province,
China
Member name: bebonkevin
Country:
China
Member Since: 07 December 2010
Total Leads: 42 bebonkevin Import Export Business Leads
Business focus: Hot Rolled Steel Plate, Coil, Angle Steel, Flat Bar, Steel Pipe, Stainless Steel
Chat:
Verify: Safe Import Export Tips
Matreial number:108823
Analogic:DIN EN
10025-4
Tensile strength class:B
1.Its usage
The series of thermomechanically-rolled fine-grain structural steels is characterised by a minimum
yield strength of 275-460 N/mm2, by good weldability and high resistance to brittle cracking.They
are used above all for highly stressed welded structures in the construction of bridges and steel structures.
2.Its mechanical properties
The tensile test value of S355M is 470 to 630 Mpa and its total elongation is ≥22%.
Its yield strength is ≥355Mpa when the thickness is ≤16mm, on the contraty when its thickness is >16mm, its yield strength is ≥345Mpa.
2.Welding
The sine-grain structural steel grades of this series can be perfectly welded both manually and using automatic equipment by means of all known welding processing, not least due to their reduced carbon content and the low carbon equivalent value.In genaral, pre-heating prior to wealding is not necessary due to the low tendency to cold-cracking.However, the
quality of the weld joint depends on the welding process, the welding conditions and the
selection of the correct filler metals.Gas welding should not be used.
The welding wires and electrodes approved in this strength category must be used as filler metals.Basic coated electrodes are recommended for manual welding.And these fine-grain structural steel grades are not suitable for heat treatment above 580℃.Stress relief annealing(530-580℃)is required only if called for in the regulations or if manufacturing conditions make a reduction of the residual welding stresses appear useful.The holding time should be between 30 and 60 minutes.
3.Condition of delivery, scope of testing and certificate
The provisions of EN 10025-4 shall apply for delivery and specification, .The products are themomechanically-rolled and we can delivery the products according to your requirements.What’s more our divery time in generally 20 to 40 days.
Standard: AISI, ASTM, BS, DIN, GB, JIS
Grade: S355M
Thickness: 2-460mm
Place of Origin: Henan China (Mainland)
Brand Name: BEBON
Model Number: S355M
Type: Steel Plate Technique: Hot Rolled
Width: 1500-3000mm Length: 3000-18000mm
Packaging & Delivery
Packaging Detail: standard export packing as customer's requirement
Delivery Detail within 20 days after receiving the L/C or T/T
Henan BEBON international co., ltd, located in zhengzhou, henan province of china, is specialized in manufacturing and exporting steel. Based on the domestic rich product resources and professional research on international market, BEBON'service has already spread many countries in Europe, America, Southeast Asia, Middle East, South America, Africa, and so on .
Our company's main product is steel
About steel, our produce mainly contains hot rolled steel plate/coil, angle steel, flat bar, steel pipe, stainless steel In ASTM/ASME/EN/JIS/ST/SB/ISO standard.
Our service shows three pieces of advantage:1. we have our storage in Tianjin and Shanghai, and the product material quality is complete, the reserve is big, and delivery can be immediate. 2. Our service is the "one-stop" work style. We have our processing factory and the pre-treatment factory, can make the customers enjoy cutting, welding, drilling holes, ball blasting, derusting, painting, galvanizing by the lowest cost price.
High and new technology industrial development zone, Zhengzhou city of Henan province, China
6.If interested, please free to contact us
Company Contact:
Contact Name: Manager Liu
Company Name: BeBon International
Email:
Tel: 008637186151627
Fax: 008637186011881
Street Address: Room2801,
International Enterprise Center 2#,
Zhengzhou City Of Henan Province,
China
Member name: bebonkevin
Country:
ChinaMember Since: 07 December 2010
Total Leads: 42 bebonkevin Import Export Business Leads
Business focus: Hot Rolled Steel Plate, Coil, Angle Steel, Flat Bar, Steel Pipe, Stainless Steel
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Cold Rolled Steel - By hanxiindustry - On Monday 6 March 2023 5:47 am: rolled steel is hot-rolled steel that has been cleaned of iron oxide scale pickled and reduced to a specific thickness through a series of rolling s....
Hot Rolled Steel Coil - By shineyondmetals - On Saturday 29 October 2022 3:40 am: rolled steel coil hot rolled steel sheet hrc steel are made from slabs heated and rolled by roughing and finishing units also named hot rolled carb....
Hot Rolled Wire Rod - By shineyondmetals - On Friday 24 November 2023 3:03 am: rolled steel section
according to the steel distribution catalogue wire includes ordinary low carbon steel hot rolled wire rod welding wire rod b....
Hot Rolled Steel Plate - By ShandongLusteelCoLtd - On Friday 15 April 2022 6:02 am: rolled steel plate
standard astm din iso en jis gb etc
material material q195 q235 q235b q345 q345b 20 45 ss330 ss400 a36 st37 ....
Cold Rolled Steel Coil - By shineyondmetals - On Saturday 29 October 2022 3:40 am: rolled steel coil
specifications 0 2mm-3 5mm × 700mm-2080mm
package the inner packaging are plastic film and waterproof paper the outer packa....
Hot Rolled Pickled Steel - By hanxiindustry - On Monday 6 March 2023 5:46 am: rolled pickled steel removes the surface oxide scale improves the surface quality and is convenient for oiling welding and painting it is mainly ....
China Rolled Plate Glass - By SuSteelGlass - On Monday 26 December 2022 7:14 am: rolled plate glass
fob price range 10 71 square meter
supply capacity more than 10000 square meter
from the quantitative more than 100 square m....
Structural Grating Floor Panels - By weldedmeshfence - On Friday 19 May 2023 2:38 am: structural grating floor panels
bar grating is a rugged one-piece constructed panel widely used as building material in construction the steel bar gi grating serrated sheet is po.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Tianjin Shengjintai Steel and Iron Co Ltd: Eire Guo Of Tianjin Shengjintai Steel and Iron From China
- Shaoxing Marina Biotechnology: James Han Of Shaoxing Marina Biotechnology From China
- Onward International Co Ltd: Naoko Takahashi Of Onward International Offering Shipping Services and Promoting Sale Of Agricultural Products From Thailand
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely