-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 93 visiting from 65 USA 
19 Canada 
5 Singapore 
2 UK 
1 New Zealand 
1 Argentina
Hello visitor from
USA - 93 visiting from 65 USA 19 Canada 5 Singapore 2 UK 1 New Zealand 1 Argentina
Setting Up A Sawdust Briquette Making Units
Posted at: Offers to Sell and Export | Posted on: Sunday 25 April 2021 8:24 am | Poster last visit: Thursday 28 October 2021 | Targeted Countries: Nigeria | India | Cote DIvoire
Product Category: Main
» Fuels and Fuel Additives and Lubricants and Anti corrosive Materials
» Fuels
» Solid and gel fuels
» Briquette
» Setting Up A Sawdust Briquette Making Units
Product Description:
Biomass briquettes, fuel substitues made through the compaction of bio-degradable waste such as sawdust
or seed husks. Unlike the primitive hand made briquettes of the past, modern ones are made in special biomass sawdust briquette machine.
Materials Used For Biomass Briquette Making
You have two main sources of biomass for briquette making. The first is the agricultural sector. A vast amount of biomass produced in our farms sadly goes to waste. The seed husks and plant stalks you throw away can help bridge the deficit in energy supply if properly utilized. The second is the timber industry. By-products of saw mill, paper mill and logging operations such as sawdust are left to go to waste. But no longer, to tap into this wasted potential, sawdust briquette making units are sprouting the world over. It is this type of unit that we will discuss below.
Biomass Sawdust Briquette Making Units
If you walk into a biomass briquette making plant, you will find a series of machines designed to work together towards a common goal. Each machine can be operated independently if the need arises. Below is an outline of each stage in the briquette making process plus what each machine in the stage does.
Crushing
Your raw material is first crushed into the required size using a crusher known as a hammer mill. Once the particles are smaller than the recommended 3 millimetres, you are now ready for the next stage.
Drying
The crushed particles are conveyed to a dryer by a conveyor belt. In this stage, you remove excess moisture because despite drying your material in the sun, the moisture levels are still above the recommended 15 percent.
Conveying
Once the first two stages are done, you then convey your particles to the compaction machine via a conveyor belt.
Briquetting
You have a choice of two compactors depending on the intended final product. There is the charcoal briquette machine for making hollow briquettes and the punching press for solid ones.
Carbonization
After compaction, you can opt to fire the briquettes into charcoal. To do this, you place them in a sealed kiln and ignite them. 2 to 3 days later and after reaching temperatures of up to 700 degrees celcius, your product is ready for the last stage. Or put them in a carbonization furnace.
Benefits Of Briquette Making
Since communities living in remote areas heavily depend on wood and charcoal for their fuel needs, they inevitably deplete the forests around them. Providing them with affordable eco-friendly alternatives such as biomass briquettes not only meet their needs, it also saves the environment. Moreover, the money that would have otherwise been spent on fuel can now be used for personal development. Finally, charcoal briquette making plants provide locals with employment opportunities.
With today's world of high energy prices, affordable alternative forms of energy are needed maybe more than ever. Biomass sawdust briquette making units can ease the burden on the world's energy reserves. Since the technology and know how exist, all that now remains is the will to utilize what could possibly change the world for many impoverished people.
Company Contact:
Contact Name: Amy Yan
Company Name: Zhengzhou Fusmar Machinery Co., Ltd
Email:
Tel: +8615838279423
Fax: +8615838279423
Street Address: No.45 Agricultural
Road, Jinshui District Zhengzhou,
Henan 450003 China
Other Contact Info:
Skype:
Website: https://www.feedpelletmills.com
Member name: FusmarMachinery
Country:
China
Member Since: 28 May 2019
Total Leads: 216 FusmarMachinery Import Export Business Leads
Business focus: Pellet Mill, Fish Feed Machine, Charcoal Briquette Machine
Chat:
Verify: Safe Import Export Tips
or seed husks. Unlike the primitive hand made briquettes of the past, modern ones are made in special biomass sawdust briquette machine.
Materials Used For Biomass Briquette Making
You have two main sources of biomass for briquette making. The first is the agricultural sector. A vast amount of biomass produced in our farms sadly goes to waste. The seed husks and plant stalks you throw away can help bridge the deficit in energy supply if properly utilized. The second is the timber industry. By-products of saw mill, paper mill and logging operations such as sawdust are left to go to waste. But no longer, to tap into this wasted potential, sawdust briquette making units are sprouting the world over. It is this type of unit that we will discuss below.
Biomass Sawdust Briquette Making Units
If you walk into a biomass briquette making plant, you will find a series of machines designed to work together towards a common goal. Each machine can be operated independently if the need arises. Below is an outline of each stage in the briquette making process plus what each machine in the stage does.
Crushing
Your raw material is first crushed into the required size using a crusher known as a hammer mill. Once the particles are smaller than the recommended 3 millimetres, you are now ready for the next stage.
Drying
The crushed particles are conveyed to a dryer by a conveyor belt. In this stage, you remove excess moisture because despite drying your material in the sun, the moisture levels are still above the recommended 15 percent.
Conveying
Once the first two stages are done, you then convey your particles to the compaction machine via a conveyor belt.
Briquetting
You have a choice of two compactors depending on the intended final product. There is the charcoal briquette machine for making hollow briquettes and the punching press for solid ones.
Carbonization
After compaction, you can opt to fire the briquettes into charcoal. To do this, you place them in a sealed kiln and ignite them. 2 to 3 days later and after reaching temperatures of up to 700 degrees celcius, your product is ready for the last stage. Or put them in a carbonization furnace.
Benefits Of Briquette Making
Since communities living in remote areas heavily depend on wood and charcoal for their fuel needs, they inevitably deplete the forests around them. Providing them with affordable eco-friendly alternatives such as biomass briquettes not only meet their needs, it also saves the environment. Moreover, the money that would have otherwise been spent on fuel can now be used for personal development. Finally, charcoal briquette making plants provide locals with employment opportunities.
With today's world of high energy prices, affordable alternative forms of energy are needed maybe more than ever. Biomass sawdust briquette making units can ease the burden on the world's energy reserves. Since the technology and know how exist, all that now remains is the will to utilize what could possibly change the world for many impoverished people.
Company Contact:
Contact Name: Amy Yan
Company Name: Zhengzhou Fusmar Machinery Co., Ltd
Email:
Tel: +8615838279423
Fax: +8615838279423
Street Address: No.45 Agricultural
Road, Jinshui District Zhengzhou,
Henan 450003 China
Other Contact Info:
Skype:
Website: https://www.feedpelletmills.com
Member name: FusmarMachinery
Country:
ChinaMember Since: 28 May 2019
Total Leads: 216 FusmarMachinery Import Export Business Leads
Business focus: Pellet Mill, Fish Feed Machine, Charcoal Briquette Machine
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Dissolved Air Flotation Units - By Dagyee - On Friday 14 October 2022 7:13 am: dissolved air flotation units
daf dissolved air flotation consists of flotation tank dissolved air system reflux pipe dissolved air released system skimmer based on customer....
Oval Flange Pillow Block Units Ucfl Series - By sanyarollerbearing - On Thursday 8 December 2022 6:07 am: oval flange pillow block units ucfl series
bearing no shaft dia dimensions mm bolt size weight kg
d h j l a2 a1 a e n s
in mm
ucfl 201 12 99....
Sichuan Deyang Vibration Sensor Units Hd-st-a3-b3 Steam Turbine Parts - By DongfangYoyik - On Friday 14 July 2023 1:47 am: units hd-st-a3-b3 steam turbine parts
is yoyik for the use of units of the power plant supporting professional models of products yoyik main generat....
Mosaic Tile Patterns Setting Grid - By wondamosaic - On Thursday 10 December 2009 10:22 am: setting mould suitable for diamond mosaic tile chip sizes 25*25*2mm material glass fiber reinforced plastic
2 features wearable temperature-re....
Flash Setting Admixture - By muhuchina - On Friday 16 April 2010 8:29 am: setting admixture
mnc-q1
description
mnc-q1 mainly uses in the sulphoaluminate series cement the aluminate series cement and from this the cement ....
Disc Harrow 1bzd Hydraulic Pressure Pair Setting Heavy Harrrow - By yuntaichris - On Saturday 28 August 2010 2:18 am: up the clods and lossening of wasteland shrub swamp heavy soil can rake instead of plough
item unit 1bzd-2 8 1bzd-3 3 1bzd-3 8
max working widt....
Setting Up Offline Mode On Your Das - By unsoft2011 - On Wednesday 1 September 2010 4:41 am: setting up offline mode on your das
as you know the offline programming has been switched off on das beginning from das 012010 so now when you want to program a control unit for whate....
5-piece Place Setting - By xacrylicvanjin - On Wednesday 22 December 2010 8:42 am: 5-piece place setting
5-piece place setting
with cup platform
dimensions 3-3 8 quot h x 4 quot w x 14-1 4 quot d
clear heavy weight acrylic
attn ms clover li.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Zhejiang Tianfeng Plastic Machinery Plant: Herbert He Of Zhejiang Tianfeng Plastic Machinery Plant, A Manufacturer Of PP Woven Bag Machinery From China
Briquette Classification Navigation
Main - Fuels and Fuel Additives and Lubricants and Anti corrosive Materials - Fuels - Solid and gel fuels - Briquette [36]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely