Sludge dewatering screw press
The Sludge Dewatering Screw Press Machine for Wastewater
Treatment developed by HOLLY utilizes the dewatering principles of force-water homo-direction, thin-layer dewatering, proper pressure and extension of the sludge dewatering path. The new equipment, more advanced than the traditional dewatering equipment which are easily blocked, unsuitable for low-concentrated sludge and oily sludge, of high consumption and difficult to operate, well eliminate these problems and are of higher efficiency and power saving.
♦ Exclusive pre-thickening device enables a wide solid concentration ranging from 3000mg/l to 50000mg/l
♦ Fixed and moving plates replace filter cloth, self-cleaning, clog-free, easy to handle oily sludge
♦ Low running speed, low noise, low power consumption, 1 /8 of Belt Press and 1 /20 of centrifuge
♦ Less capital construction cost, more excellent working performance
♦ Fully automatic control, Easy operation and simple maintenance
Applicable sludge concentration of 2000mg/L-50000mg/L.
Most especially for the oily sludge.
Fully Automatic Control
Combining with the auto control system, the machine runs very safely and simply and can be programmed according to the requirement of the users. It can operate automatically for 24 hours, unmanned.
Low Running Cost
Power-use: less than 5% of centrifuge.
Water-use: less than 0.1% of belt filter press. Polymer: saving around 60%.
Room: saving more than 60% of the investment for dehydration room.
Self-cleaning with small amount of water.
Suit for Oily Sludge
No secondary pollution
The screw shaft rotational speed about 2~3r/min, no vibration and noise is very small .
Only need a small amount of water for self-cleaning, no secondary water pollution.
Sludge runs at a slow operating condition. The smell does not spread.
Promote the phosphorus removal capability
Dewatering sludge under aerobic conditions, it does not occur phosphorus release, so as to enhance phosphorus removal function of the whole sewage treatment system.
Contact Name: Victor Qiu
Company Name: Yixing Holly Technology Co., Ltd.
Street Address: Gaocheng Village,
Yixing, Jiangsu 214200
Member name: HollyTech
Member Since: 12 October 2016
Total Leads: 7 HollyTech Import Export Business Leads
Business focus: Environmental Services, Fine Bubble Diffuser, Dewatering Screw Press, Tube Settler Media, Bio Filter Media, Mechanical Bar Screen
Verify: Safe Import Export Tips
Product Category: Dewatering equipment