-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 33 visiting now from 26 USA 
2 China 
1 Colombia 
1 Denmark 
1 India 
1 Russia 
1 Brazil
Hello visitor from
USA - 33 visiting now from 26 USA 2 China 1 Colombia 1 Denmark 1 India 1 Russia 1 Brazil
Stainless Steel Woven Wire Cloth
Posted at: Offers to Sell and Export | Posted on: Monday 28 September 2026 1:27 am | Poster last visit: Monday 28 September 2026 |
Product Category: Main
» Manufacturing Components and Supplies
» Rope and chain and cable and wire and strap
» Non electric iron and steel wire
» Stainless steel wire
» Stainless Steel Woven Wire Cloth
Product Description:
Stainless Steel Woven Wire Cloth
Precision-woven from 304, 316, and 316L stainless steel wire, Jiushen's
woven wire cloth delivers consistent aperture control from 1×1 mesh down to 635×635 mesh.
Stainless steel woven wire cloth — also referred to as wire mesh, wire screen, or wire fabric — is manufactured by interlacing stainless steel wires in a precise over-and-under pattern on industrial weaving looms. The result is a dimensionally stable, corrosion-resistant fabric whose controlled, repeatable apertures make it the preferred filtration medium across chemical processing, food production, pharmaceutical, petrochemical, and mining industries worldwide. At Jiushen, every roll is woven in our 15, 000 m˛ facility in Anping County and inspected against ASTM E2016 / E2814 standards before shipment.
Unlike welded wire panels, woven wire cloth achieves extremely fine openings — down to 20 µm in plain weave and below 2 µm in Dutch twill configurations — while maintaining the flexibility needed for fabrication into filter discs, cylinders, cartridges, and flat panels. Jiushen offers eight weave architectures, five stainless steel alloy grades, and a maximum single-weave width of 2, 700 mm, backed by an annual production capacity of 8, 000, 000 m˛.
Weave architecture directly determines flow rate, pressure drop, particle retention, and mechanical strength. Jiushen produces all major industrial weave configurations on dedicated looms, each optimized for specific service conditions.
1. Plain Weave (Square Weave)
One wire over, one wire under, with equal wire diameters in warp and weft directions. The most common construction, offering a balanced open area and mechanical stability across a wide mesh count range from 1×1 to 635×635. Aperture sizes range from approximately 21.4 mm down to 20 µm depending on mesh count and wire diameter.
2. Twill Weave
A two-over, two-under offset pattern that accommodates heavier wire diameters at higher mesh counts. Produces a denser, more robust cloth for demanding mechanical screening and sieving applications where plain weave would be too fragile at the same mesh count.
3. Plain Dutch Weave
Fine warp wires woven over heavier, closely packed shute wires to create a gradient-porosity structure. Delivers absolute filtration ratings from 18 µm to 340 µm. Widely preferred for liquid filtration systems, hydraulic oil strainers, and petrochemical separation equipment.
4. Twill Dutch Weave
A two-over, two-under Dutch construction that achieves absolute filtration ratings down to 2–3 µm, making it one of the finest mechanical filtration media available in standard woven wire cloth. Ideal for polymer melt filtration and pharmaceutical fine filtration.
5. Reverse Plain Dutch Weave
A high warp wire count woven through lighter shute wires, delivering superior mechanical strength perpendicular to the warp direction. Ideal for high-pressure back-flush applications, candle filter elements, and tubular filter fabrication.
6. Reverse Dutch Twill Weave
Twill Dutch weave in reverse orientation, maximizing shute-wire density for fine absolute ratings (15–530 µm nominal) while retaining high differential pressure resistance. Commonly selected for candle filters, leaf filters, and high-flow process vessels.
7. Herringbone Weave
Alternating twill blocks reversed at regular intervals create a V-shaped chevron surface pattern. Provides a visually distinctive, flat finish that is popular in architectural cladding, decorative infill panels, and premium industrial applications.
8. Five-Heddle Weave
A one-over, four-under satin-type pattern that produces a smooth, nearly flat surface on one side. Preferred for conveyor belt underlays and any application where minimal contact friction on the mesh surface is required.
All incoming wire is verified on arrival using an in-house spectrometer and universal tensile testing machine in compliance with ASTM A580/A580M-18. Each spool is labeled, segregated, and stored by order number to ensure full raw material traceability.
Custom alloys including 321, 347, 904L, Duplex 2205, and Hastelloy are available on request. Please contact our engineering team with your service conditions for alloy recommendations.
Standard mesh counts, wire diameters, opening sizes, and open area percentages are listed below. Custom specifications beyond this range are available — contact our engineering team for non-standard configurations.
Company Contact:
Contact Name: Jessica Zhao
Company Name: Hebei Jiushen Wire Weaving Co., Ltd
Email:
Tel: 86-18231858969
Fax:
Street Address: Jiatun Industrial
Park, Anping County
Hengshui, Hebei 053600
China
Website: https://www.jswireweaving.com
Member name: jswireweaving
Country: China
Member Since: 04 September 2023
Total Leads: 17 jswireweaving Import Export Business Leads
Business focus: Window Screen Mesh, Epoxy Coated Wire Mesh, Stainless Steel Wire Mesh, Aluminum Wire Mesh, Low Carbon Steel Wire Mesh
Verify: Safe Import Export Tips
Precision-woven from 304, 316, and 316L stainless steel wire, Jiushen's
woven wire cloth delivers consistent aperture control from 1×1 mesh down to 635×635 mesh.
Stainless steel woven wire cloth — also referred to as wire mesh, wire screen, or wire fabric — is manufactured by interlacing stainless steel wires in a precise over-and-under pattern on industrial weaving looms. The result is a dimensionally stable, corrosion-resistant fabric whose controlled, repeatable apertures make it the preferred filtration medium across chemical processing, food production, pharmaceutical, petrochemical, and mining industries worldwide. At Jiushen, every roll is woven in our 15, 000 m˛ facility in Anping County and inspected against ASTM E2016 / E2814 standards before shipment.
Unlike welded wire panels, woven wire cloth achieves extremely fine openings — down to 20 µm in plain weave and below 2 µm in Dutch twill configurations — while maintaining the flexibility needed for fabrication into filter discs, cylinders, cartridges, and flat panels. Jiushen offers eight weave architectures, five stainless steel alloy grades, and a maximum single-weave width of 2, 700 mm, backed by an annual production capacity of 8, 000, 000 m˛.
Weave architecture directly determines flow rate, pressure drop, particle retention, and mechanical strength. Jiushen produces all major industrial weave configurations on dedicated looms, each optimized for specific service conditions.
1. Plain Weave (Square Weave)
One wire over, one wire under, with equal wire diameters in warp and weft directions. The most common construction, offering a balanced open area and mechanical stability across a wide mesh count range from 1×1 to 635×635. Aperture sizes range from approximately 21.4 mm down to 20 µm depending on mesh count and wire diameter.
2. Twill Weave
A two-over, two-under offset pattern that accommodates heavier wire diameters at higher mesh counts. Produces a denser, more robust cloth for demanding mechanical screening and sieving applications where plain weave would be too fragile at the same mesh count.
3. Plain Dutch Weave
Fine warp wires woven over heavier, closely packed shute wires to create a gradient-porosity structure. Delivers absolute filtration ratings from 18 µm to 340 µm. Widely preferred for liquid filtration systems, hydraulic oil strainers, and petrochemical separation equipment.
4. Twill Dutch Weave
A two-over, two-under Dutch construction that achieves absolute filtration ratings down to 2–3 µm, making it one of the finest mechanical filtration media available in standard woven wire cloth. Ideal for polymer melt filtration and pharmaceutical fine filtration.
5. Reverse Plain Dutch Weave
A high warp wire count woven through lighter shute wires, delivering superior mechanical strength perpendicular to the warp direction. Ideal for high-pressure back-flush applications, candle filter elements, and tubular filter fabrication.
6. Reverse Dutch Twill Weave
Twill Dutch weave in reverse orientation, maximizing shute-wire density for fine absolute ratings (15–530 µm nominal) while retaining high differential pressure resistance. Commonly selected for candle filters, leaf filters, and high-flow process vessels.
7. Herringbone Weave
Alternating twill blocks reversed at regular intervals create a V-shaped chevron surface pattern. Provides a visually distinctive, flat finish that is popular in architectural cladding, decorative infill panels, and premium industrial applications.
8. Five-Heddle Weave
A one-over, four-under satin-type pattern that produces a smooth, nearly flat surface on one side. Preferred for conveyor belt underlays and any application where minimal contact friction on the mesh surface is required.
All incoming wire is verified on arrival using an in-house spectrometer and universal tensile testing machine in compliance with ASTM A580/A580M-18. Each spool is labeled, segregated, and stored by order number to ensure full raw material traceability.
Custom alloys including 321, 347, 904L, Duplex 2205, and Hastelloy are available on request. Please contact our engineering team with your service conditions for alloy recommendations.
Standard mesh counts, wire diameters, opening sizes, and open area percentages are listed below. Custom specifications beyond this range are available — contact our engineering team for non-standard configurations.
Company Contact:
Contact Name: Jessica Zhao
Company Name: Hebei Jiushen Wire Weaving Co., Ltd
Email:
Tel: 86-18231858969
Fax:
Street Address: Jiatun Industrial
Park, Anping County
Hengshui, Hebei 053600
China
Website: https://www.jswireweaving.com
Member name: jswireweaving
Country:
ChinaMember Since: 04 September 2023
Total Leads: 17 jswireweaving Import Export Business Leads
Business focus: Window Screen Mesh, Epoxy Coated Wire Mesh, Stainless Steel Wire Mesh, Aluminum Wire Mesh, Low Carbon Steel Wire Mesh
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Stainless Steel Wire Mesh Cloth, Woven - By stainlessmesh - On Thursday 10 October 2024 9:35 am: stainless steel wire mesh screen and 347 alloy wire cloth
wetter stainless steel wire mesh factory specializes in the manufacturing and exporting of ....
Five Layer Stainless Steel Sintered Wire Mesh Filter Cloth - By stainlessmesh - On Thursday 10 October 2024 9:28 am: stainless steel sintered wire mesh filter cloth
five layer stainless steel sintered wire mesh filter cloth stands out as a premium filtering solution....
Stainless Steel 304 316 Ss Woven Wire Mesh Manufacturer And Exporter In China - By Unicornmetal - On Wednesday 13 August 2025 2:24 am: stainless steel wire mesh is a woven or welded mesh made from stainless steel wires known for its exceptional strength durability and corrosion res....
Stainless Steel Woven Mesh - By hesimesh - On Tuesday 30 June 2026 7:40 am: stainless steel woven wire mesh manufacturer amp amp supplier
our stainless steel woven mesh is engineered for precision durability and long-term....
Stainless Steel Wire Mesh - By MallasWireMesh - On Tuesday 25 August 2026 10:21 am: stainless steel wire mesh products meeting global quality standards available in various specifications mesh sizes typically range from coarse 2–20....
904l Stainless Steel Wire Mesh - By chinafiltermesh - On Monday 24 November 2025 12:45 am: stainless steel is an advanced super austenitic alloy initially engineered for outstanding corrosion resistance in environments with dilute sulfuric a....
Stainless Steel Crimped Wire Mesh - By chuangdiwiremesh - On Tuesday 2 December 2025 12:44 am: stainless steel crimped wire mesh is a durable woven mesh made from pre-crimped stainless steel wires interlocked to form a rigid uniform grid struct....
Stainless Steel Sintered Wire Mesh - By raywiremesh - On Friday 24 April 2026 12:42 am: stainless steel sintered wire mesh is a composite mesh made from multiple layers of stainless steel wire mesh that are sintered together under high te.... Stainless steel wire Classification Navigation
Main - Manufacturing Components and Supplies - Rope and chain and cable and wire and strap - Non electric iron and steel wire - Stainless steel wire [566]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely