-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 36 visiting from 
16 Canada 12 USA 
4 UK 
2 Germany 
1 Singapore 
1 Poland
Hello visitor from
USA - 36 visiting from 16 Canada 12 USA 4 UK 2 Germany 1 Singapore 1 Poland
Wind Power Generation Transformer
Posted at: Offers to Sell and Export | Posted on: Tuesday 18 July 2017 7:35 am | Poster last visit: Monday 25 December 2017 |
Product Category: Main
» Electrical Systems and Lighting and Components and Accessories and Supplies
» Electrical equipment and components and supplies
» Power conditioning equipment
» Electronic transformers
» Wind Power Generation Transformer
Product Description:
Wind Power Generation Transformer
New Energy Dedicated Transformer
Product structure and features
General
introduction
With the continuous growth of China's economy, the demand for electricity surged, energy has become the main contradiction. Because the traditional coal-fired and fuel power generation caused serious environmental pollution, so in order to be consistent with environmental protection requirements, wind power as a clean energy production that has been developed rapidly in our country, has become the main direction to solve the energy shortage. We company develop a series of wind power generation combination substation, which can change 690V voltage generated by wind power dynamotor to 35kVor 10kV voltage through rising and changing voltage, then send to gird system or users, finally finish the task of wind power generation. So, wind power generation combination substation is the best matching product of wind power generation system.
Structure and performance features
1, structure features
A, main body adopts the structure of common box transformer. Assemble high-voltage load switch, plug-in fuse, transformer body, off-circuit tap-switches and other H.V components in a sealed tank, transformer oil as insulating medium, its size is small and performance is excellent .
B, Overall combination type wind power substation is composed of H.V chamber, L.V. chamber, oil tank and radiator. Install chip radiator on the side of oil tank, the chip radiator is combined by guide pipe and cooling fin which can better adapt to high-power transformer’s cooling requirements. In order to prevent vandalism, to these cooling fins with weak mechanical, we will use steel shield that be punched cooling holes to enhance the protection. By substation, rise the voltage of power generated through wind dynamotor and merge into grids.
2, performance features
A, energy-saving, its no-load and with-load loss are lower than similar products, maximize the protection for the full use of wind energy.
B, safely reliably protect personal safety, body used with anti-theft structure
C, high temperature resistance, overload operational capability is strong, small size, compact structure, safe and convenient, can be used for round- ring terminal, easy to convert.
D, environment protection, no need to filter or change oil during lifetime, no pollution
3, conditions of normal operation
A, altitude not more than 2000m
B, surrounding temperature: up limit: +45 °C, low limit:-40°C
C, speed of outside wind not exceed 35m/s
D, relative humidity: daily average not more than 95%, month average less than 90%;
E, earthquake intensity does not exceed 8 degrees
F, install in the place without risk of fire, explosion and serious pollution, chemical corrosion
G, special operational conditions: if you can not meet above operational requirements, we can discuss with customers to maximize to reach what they want.
4, technology program and structure
Wind power generation transformer is a kind of products that install transformer, overload switchgear, high-voltage fuse in the box inside and use transformer’s insulating oil as the whole product’s insulation, cooling medium.
Adopt fully sealed structure, the shell is made of imported paint that has strong anti-corrosion ability. The product has these advantages of small size, light weight, easy installation, etc.
12kV wind power transformer adopts“pin”glyph structure which can realize the function of round-grid. Use elbow-shaped plug for H.V. and two fuses to protect.
38.5kV wind power transformer adopts“L”glyph or “mu”glyph structure which can realize the function of round-grid.
Use flange insulating casing for H.V. an integral plug-in fuse to protect.
Suitable for middle voltage wind power generated transformer drive system, and transformer is placed in the outside of wind tower.
Company Contact:
Contact Name: Fraceen Jin
Company Name: Channel International Ltd.
Email:
Tel: +86-021-61071577
Fax: +86-021-61077317
Street Address: Rm 1001, Ruifeng
International Building, No.248
Yangshupu Rd., Hongkou Dist
Shanghai, Shanghai 200082
China
Website: http://www.ehearttransformer.com/
Member name: ehearttransformer
Country:
China
Member Since: 18 July 2017
Total Leads: 18 ehearttransformer Import Export Business Leads
Business focus: Special Transformer, Dry Type Tansformer
Chat:
Verify: Safe Import Export Tips
New Energy Dedicated Transformer
Product structure and features
General
introduction
With the continuous growth of China's economy, the demand for electricity surged, energy has become the main contradiction. Because the traditional coal-fired and fuel power generation caused serious environmental pollution, so in order to be consistent with environmental protection requirements, wind power as a clean energy production that has been developed rapidly in our country, has become the main direction to solve the energy shortage. We company develop a series of wind power generation combination substation, which can change 690V voltage generated by wind power dynamotor to 35kVor 10kV voltage through rising and changing voltage, then send to gird system or users, finally finish the task of wind power generation. So, wind power generation combination substation is the best matching product of wind power generation system.
Structure and performance features
1, structure features
A, main body adopts the structure of common box transformer. Assemble high-voltage load switch, plug-in fuse, transformer body, off-circuit tap-switches and other H.V components in a sealed tank, transformer oil as insulating medium, its size is small and performance is excellent .
B, Overall combination type wind power substation is composed of H.V chamber, L.V. chamber, oil tank and radiator. Install chip radiator on the side of oil tank, the chip radiator is combined by guide pipe and cooling fin which can better adapt to high-power transformer’s cooling requirements. In order to prevent vandalism, to these cooling fins with weak mechanical, we will use steel shield that be punched cooling holes to enhance the protection. By substation, rise the voltage of power generated through wind dynamotor and merge into grids.
2, performance features
A, energy-saving, its no-load and with-load loss are lower than similar products, maximize the protection for the full use of wind energy.
B, safely reliably protect personal safety, body used with anti-theft structure
C, high temperature resistance, overload operational capability is strong, small size, compact structure, safe and convenient, can be used for round- ring terminal, easy to convert.
D, environment protection, no need to filter or change oil during lifetime, no pollution
3, conditions of normal operation
A, altitude not more than 2000m
B, surrounding temperature: up limit: +45 °C, low limit:-40°C
C, speed of outside wind not exceed 35m/s
D, relative humidity: daily average not more than 95%, month average less than 90%;
E, earthquake intensity does not exceed 8 degrees
F, install in the place without risk of fire, explosion and serious pollution, chemical corrosion
G, special operational conditions: if you can not meet above operational requirements, we can discuss with customers to maximize to reach what they want.
4, technology program and structure
Wind power generation transformer is a kind of products that install transformer, overload switchgear, high-voltage fuse in the box inside and use transformer’s insulating oil as the whole product’s insulation, cooling medium.
Adopt fully sealed structure, the shell is made of imported paint that has strong anti-corrosion ability. The product has these advantages of small size, light weight, easy installation, etc.
12kV wind power transformer adopts“pin”glyph structure which can realize the function of round-grid. Use elbow-shaped plug for H.V. and two fuses to protect.
38.5kV wind power transformer adopts“L”glyph or “mu”glyph structure which can realize the function of round-grid.
Use flange insulating casing for H.V. an integral plug-in fuse to protect.
Suitable for middle voltage wind power generated transformer drive system, and transformer is placed in the outside of wind tower.
Company Contact:
Contact Name: Fraceen Jin
Company Name: Channel International Ltd.
Email:
Tel: +86-021-61071577
Fax: +86-021-61077317
Street Address: Rm 1001, Ruifeng
International Building, No.248
Yangshupu Rd., Hongkou Dist
Shanghai, Shanghai 200082
China
Website: http://www.ehearttransformer.com/
Member name: ehearttransformer
Country:
ChinaMember Since: 18 July 2017
Total Leads: 18 ehearttransformer Import Export Business Leads
Business focus: Special Transformer, Dry Type Tansformer
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Yoyik Supply Inner Gear Pump Rcb-300 For Power Generation - By DongfangYoyik - On Monday 24 April 2023 1:05 am: power generation
deyang dongfang yoyik is located in deyang sichuan which has convenient transportation and varieties of homemade products and bran....
China Supplier Pressure Regulating Valve Working Kc50p-97 For Power Generation - By DongfangYoyik - On Friday 9 June 2023 1:09 am: power generation
yoyik is a research and development production sales import agents in one of the manufacturing and processing enterprises our co....
S11-m Power Transformer - By bokrelec - On Saturday 23 December 2023 6:14 am: power transformer
s11-m electrical power distribution transformer
a new generation of low noise and low loss transformer developed in recent years ....
Low Dust Generation And High Fretting Resistance Thk Aff 70g Grease - By Alice - On Monday 24 October 2022 11:14 am: generation and high fretting resistance at a level that conventional vacuum greases or low dust generation greases have do not reach
features
sta....
Wind Generator - By OakonTechLimited - On Wednesday 20 September 2023 6:37 am: wind generator have nine models they have nine different powers each corresponding to nine models the power is available from 100w to 1000w
the pro....
New Style Power Station 5in1 220v 150 W 300w Portable Power Station Ac 220 V For House - By movrpower - On Monday 8 August 2022 10:27 am: power station
product model
nvel-300
cell capacity
75000mah 270wh
dc output
12v 10a
ac output power
300w 220v 50hz
usb-a output
1*5v 2....
Best Battery Portable Power Station 250 / 500w Power Bank Charging Station - By movrpower - On Monday 8 August 2022 10:22 am: power 1000w
battery category lithium battery
shell aluminum ladder
waterproof level ip65
size 210*290*150 mm
weight
9 8kg
output port
4*....
Poe Injector Pse801fm 19w Poe Power Supply 4578 Power Supply - By LGLGUO - On Wednesday 15 February 2023 2:09 am: power is above 19w
the maximum power supply distance is 100m
built in power supply plug and play no management required
pse801fm single port 100m.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Qingdao Saint-kin Wind Turbine Co Ltd: Sianna Of Qingdao Saintkin Wind Turbine From China
- Jinhua Sunrise Electronic Co Ltd: Andy Peng Of Jinhua Sunrise Electronic From China
- Guangzhou Kinggreat Trading Ltd: Emma Lee Of Guangzhou Kinggreat Trading An Electronic Products And Accessories Supplier From China
- Esperantop Holding Company Limited: William Of Esperantop Holding Producing High Volume Short Lead Time Consumer Goods From China
- EDI-LED Electronics Co Ltd: Sunny Ye Of EDI-LED Electronics, A Manufacturer Of Led Lighting From China
Electronic transformers Classification Navigation
Main - Electrical Systems and Lighting and Components and Accessories and Supplies - Electrical equipment and components and supplies - Power conditioning equipment - Electronic transformers [26]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely